ATI X2 AR-15 Grip in Black
Fits: Most AR-15 and AR Variants.
Fits Note: The X2 Grip Also Fits the Ruger 22 Charger Pistol with AR-15 Style Grip
ATI Gunstocks entered the design process of the Scorpion X2 AR-15 grip with a scientific procedure to create a pistol grip with optimum angles and grip space to the trigger. Employing top quality DuPont glass reinforced polymer the Scorpion X2 grip isn't just comfortable it's designed to optimize grip angle, positioning, and recoil management. The Scorpion X2 AR-15 grip keeps textured grip sections on the front of the grip for finger positioning, but removes the finger grooves from the original Scorpion X2 AR-15 grip. The ATI AR-15 Scorpion X2 grip was designed to fit with a Mil-Spec locking ring, and won't fit with locking rings that have additional sling loops or QD Mounts.
The X2 has a material that absorbs the initial shock wave that is the punch of the recoil. The AR-15 Scorpion Handgun Grip increases the shooter's comfort while reducing the muzzle lift. There have been lots of advancements in AR-15 accessories. Some great and some not so good. The ATI Gunstocks Scorpion X2 AR-15 pistol grip is one of the great ones. The grip angles, and materials deliver comfort and management. Additionally, the reduced angle and the high tang, offer a natural grip for an arrow with exceptional recoil management. The cost of the Scorpion X2 pistol grip is very aggressive, and the benefits in its design make it a serious competitor for law enforcement, professional, and leisure shooters alike.
The ATI AR-15 X2 AR-15 Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing the muzzle lift.
Features and Benefits of the ATI X2 Grip
- X2 AR-15 Pistol Grip
- V2 Sure Grip Texture
- Built-In X Series Backstrap
- Increased Size to Cushion/Protect Hand Through Web of Thumb
- Eliminates the Punch of the Recoil
- Recoil Impact is Absorbed - Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
- Not Affected by Chemicals, Load Size or Extreme Temperatures
- Specifically Engineered Grip Dimensions Create the Optimal Distance from the Grip to the Trigger to Fit Most Hands
- Rear Tang & Curved Base makes for Consistant Hand Placement and Reduces Muzzle Lift
- Specific Contours for Repeatable Hand Placement
- Finger Elevation Contour Leads Finger to Trigger
- Vertical Angle of Grip Allows For Improved Comfort & Hand Positioning
- Enables the Shooter to Keep Elbow Tight to the Body even with Body Armor or Fully Collapsed Adjustable Stock
- Elevates Hand to the Perfect Height which Aligns the Index Finger with the Trigger
- Easy Installation
- Uses Original Mounting Hardware
- Scratchproof & Weatherproof
- DuPont® Extreme Reinforced Polymer
- Limited Lifetime Warranty
- Made in the USA
The ATI AR-15 X2 Pistol Grip is designed to fit with a mil-spec locking ring. It will not fit with locking rings that have additional sling loops or QD Mounts.
Scorpion Grip Patent # 8,561,338 B2
Patent Pending AR-15 Grip
The distinction between inferior quality and premium AR Pistol grip is undeniable. At MSP, we only offer AR Accessories from the most trusted brands like ATI Outdoors. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
I wanted a cheap and straightforward way to put a flashlight on my rifle. This fits the bill. I put a 1" diameter flashlight with the button on end in it. It fits well, is convenient to activate, and provides a comfortable place to put my thumb when I don't need it.
Outstanding combo with the AFG2
I combined this with the Magpul AFG2 on my quad rail and my Surefire 6P, and it is absolutely perfect. The light is out of the way but allows for very natural placement of my thumb on the on/off button on the back of the light while maintaining a solid grip with the AFG2. It is lightweight but rock solid and straightforward.
Quality light mount
Magpul products are always top of the line. I have attached this to the Magpul forend on a shotgun to get the light out of my way during recoil. Seems to be holding up, I’ll comment again if things change.
Great light mount!
Great, inexpensive mount. I have a 16" carbine with a carbine length free-float Daniel Defense rail, one of the screws on the rail interfered with the mounting screws on the light mount, so I had to move it back a couple of slots. Put a Surefire G2X in the mount. I was worried about barrel shadow, with the carbine length rail, and there is some, but the light is mounted high enough so that looking down the sights, it's unnoticeable and far to the right bottom corner of the light's beam. Mount is rock solid, though, with enough flex to be resilient, but doesn't wobble at all. I haven't noticed any problems after putting a couple of hundred rounds down range.
Works good but SCAR 16 owners beware
Magpul Light Mount works as advertised was able to mount my LDI MK5 on it. The only issue I have is that I placed it on my SCAR 16 and couldn't mount it in the spot I wanted unless I removed my front end cap or trimmed the sling mount off. All in all, I'm happy with it just one minor issue.
Magpul does it again
This is another excellent product from Magpul; installation is quick and easy. The forward light position clears the front sight tower nicely, on a 16" bbl, there is a small shadow of the muzzle in the light spill from a surefire 6P. I highly recommend this product to anyone who is looking to adopt handheld lights to mount on carbines.
ar 15 light mount
This rail mount is specifically designed to keep the weapon light up and to the left or right of your sight picture. Mine is left side mounted and I love it.
AR 15 flashlight mount
Work's just as advertised! This is a great option to attach and slightly offset a standard multi-use flashlight. Be sure you understand the orientation of the model as there are both left and right available. There is a very easy to install and solid lock up on your weapon. This is an effective option that won't break the bank, for all of us non "operators" out here!