My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 4.95
Product Search

Secure Checkout
Magpul Sling


Magpul Sling

Number of Products to Show
Sort Products By

Choosing your Magpul Sling

What're the differences in between Magpul Slings?

The differences in between Magpul slings are complicated than you may think. While their naming structure leaves somewhat to be desired, the differences in Between the Magpul slings are just the way they connect to your weapons. Below work our way down starting with the priciest and working our way to the least expensive.

Magpul MS4 Dual QD Sling GEN 2
The MS4 Dual QD Sling Gen 2 includes Dual Quick Disconnect sling swivels. The QD pivot is the primary attachment when the canvas is converted into single stage functionality.

This usually implies that the front and back of the rifle will need QD attachment points. To connect the MS4 into the front of your rifle: Whether you have a handguard, you will want to utilize the Magpul RSA QD. In case you have the old Magpul MOE Handguard you will want to use the Magpul MSA QD. To connect the MS4 to the back of your rifle: You can mount a Magpul ASAP QD between the lower receiver and receiver extension's castle nut. You are going to must remove the castle nut that requires an armorer's wrench. Alternately, The Magpul MS4 Sling can be mounted into a buttstock if this buttstock has a QD attachment tip or a QD attachment point can be added.

Magpul MS3 Single QD Sling Gen 2
The MS3 Single QD Gen 2 includes one QD swivel and one Paraclip. The QD pivot is the primary attachment when the canvas is converted into single stage functionality. This usually means that the back of the gun employs the QD attachment and the front part of the weapon will utilize the Paraclip attachment. To connect the MS3 Single QD into the front of your rifle: Whether you have a handguard, you will want to use the Magpul RSA. Whether you're an old Magpul MOE Handguard, you will want to utilize the Magpul MSA. To connect an MSD Single QD to the back of your rifle: You can mount a Magpul ASAP QD between the receiver and the receiver extension's castle nut. You are going to must remove the castle nut that requires an armorer's wrench. Alternately, The Magpul MS3 Single QD Sling can be mounted into a buttstock if this buttstock has a QD attachment stage or a QD attachment point can be added.

Magpul MS3 Gen 2
The MS3 Gen 2 includes Paraclip. The Paraclip is the primary attachment when the sling is converted to a single point functionality. Which implies that the rear and front of the gun will require Paraclip attachment points. To connect the MS3 into the front of your weapon: Whether you have a handguard, you will want to use the Magpul RSA. Whether you have a Magpul MOE Handguard, you will wish to use the MSA Magnifier. To connect the MS3 to the back of your gun: You can mount a Magpul ASAP between the lower receiver and the receiver extension's castle nut.

You'll need to remove the castle nut that requires an armorer's wrench. The Paraclip doesn't attach to some of the Magpul buttstocks. Magpul MS1. The MS1 includes two simple loops that may be mounted to many 11/4 sling loops. In the core of the MS1 slingshot is the slider that is patented. The slider lets enable the operator the capability to adjust length without slippage quickly. The beauty of the MS1 sling is its adaptability. If you want to convert your MS1 sling in an MS3, single QD MS3 or MS4 sling you then add adapters to your precise preferences can select the adapter which you. Once you have of your weapons, you can want to use for the back of your weapons; you can choose a QD Swivel or Paraclip adapter to mount your MS1 to the front of your gun.

What customers are saying about the Magpul Slings

Extremely nice rifle sling

I love this thing. I have mine hooked to two quick detach loops, and it has worked flawlessly. It took me a few minutes to figure it out because I'm so used to a silent rifle sling, but once I did, it became my favorite. And item perfectly matches my stealth gray furniture.

- Dustin

Magpul MS3 Multi-Mission Sling

This item was on backorder, finally got it, and found it to be adequate, but felt it was quite overpriced for a sling. I didn't find it to be all that comfortable in either position. It did seem to be a AR-15 sling that would hold up well under any weather conditions without wearing out, so I would give it an A for durability.

- Kenny

Magpul MS3 G2 Sling

This Magpul sling is a great product. I purchased this because it can easily be removed and used on any weapon I have. Well constructed from quality materials. The paraclips are heavy-duty and can be locked closed so they won't open. Easily adjusted to the length you want. This sling has an attachment point, so it can be used as a single point sling if you wish. After all the research I did compare price, quality, and what you get, I will repurchase this Magpul sling.

- mad dog

Excellent sling for AK/AR Rifle!

This rifle sling is excellent for any rifle that's going to be treated like a tool and ran hard. It can take the abuse because of how tough Magpul makes this sling. They only use the best materials in their products, and this sling is no exception! This AR-15 sling is on the heavy side so I would not recommend on a lightweight build or a hunting rifle, but excellent on a more tactical, battle-ready rifle.

- Gkling

Great sling...great price!

I purchased this as part of my first build on a recommendation from a friend and multiple positive reviews. I haven't had a chance to test it out during a live fire, but initial fitting and practice drills proved smooth. Very durable and functional fit/finish. QD attachments connect with a reassuring snap.

- Matt

Magpul MS4 QD sling Gen 2

The Magpul sling is very well made with robust materials and quality manufacturing. It is a comfort to wear and allows for versatility inherent in its design. If you want a single point AR-15 sling or a two-point, you're in luck; it's BOTH! I use this sling for my AR-15, and it's straightforward switching back and forth from single to two-point. The ease of adjustment is also a plus, making it lose or tighter is a breeze. Long story short, if you're looking for a versatile, well made and affordable sling, look no further this is the one for you.

- Rhory

Magpul MS3 Single QD Gen 2 Sling

This is another outstanding Magpul AR accessory. It is exceptionally well made. I installed it on an M4 carbine that had a QD mount in the buttstock. I also installed a Magpul RSA rail mount on the top forward rail for the front attachment point. The rifle sling installed in seconds. I am using it as a two-point sling for stability in shooting, but, with a mid-mount, I can easily swap over to a single-point configuration. It is a quality sling that is easily adaptable to multiple missions.

- Bob

Top Shelf AR Sling

This Magpul ms4 sling is the most versatile AR Sling I've ever used. They keep improving the MS sling with each generation, and now I'm not sure how they can. I use the same type of sling on three different long guns to set up the same, including a pump shotgun. The QD hooks are user-friendly, even with gloves on, and reliable. There's not much excess material to get tangled up or hooked on your gear. The adjustment device is easy to use, again even with gloves and stays adjusted where you put it. I tape all metal and hard plastic parts on the sling to reduce noise, and there is no reduced versatility as a result. I use mine as two-point slings but can switch to a single point in a heartbeat. Love it.

- Jake

magpul ms3 gen 2 is the best ar sling

I am satisfied with the Magpul ms3 sling. Has the ability to convert from a 1point or 2sling in seconds. Sewing and stitching are substantial compared with more High Dollar Slings. Locking Paraclips is a plus. They are reliable as well and worth the price. I chose coyote as it matches the FDE colors for me. I run this sling on my M-870 or Blackout-300, M-16. Sling adjustable to all also seems to fit many statutes of people; Magpul did an excellent well thought out job on this one.

- recon7