Magpul M-LOK® Bipod Mount
The Magpul M-LOK Bipod Mount allows for the attachment of most Harris bipodstud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.
By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from Mil-Spec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included.
Max overall length of 2.33".
Made in the USA.
- Harris m-Lok bipod
- Magpul bipod m lock install
- Best m Lok bipod mount
The distinction between inferior quality and premium Bipod Mount & M-LOK accessories is undeniable. At MSP, we only offer Mount & Rail from the most trusted brands like Magpul. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Perfect fit for Harris bipod for m lok rail
This was a perfect fit on front of ruger rpr rimfire to mount a Harris bipod.
Best m-lok bipod mount
I use this on a Ruger RPR. A BCM 5.56 and a BCM 300 BLK. It is excellent. Stable and solid lock up with a Harris Bipod
Does was it's designed for very well
The Magpul m-lok bipod mount tightened on very well and made for a very secure mounting point for my bi-pod. If you have to have an M-LOK mount, this will do the job nicely. I still prefer a Picatinny, but that has nothing to do with this product.
Works well but pricey...
The M Lok bipod mount went on my Magpul M-Lok handguard smoothly. I had to grind the screws down to allow for barrel oscillation, but it works fine and is very solid. The only issue I have is the price.
Great Accessory for Magpul Hunter 700 Stock
I bought a new AAC-SD .308 and replaced the Hogue stock with a Magpul Hunter 700 Stock. I also purchased the Bolt Action Magazine Well, which comes with one PMAG 5 7.62 AC Magazine, and this M-Lok Aluminum Bipod Mount, which contrary to another less positive review, does fit the Magpul Hunter 700 Stock without any issue whatsoever. The stock swap took less than 10 minutes, and everything fit perfectly. The total for all of the above and a Timney trigger was barely over $1,000, and I'm delighted with the results.
Quick, easy and solid
Bought a Magpul stock for a 10/22 and wanted to put a bipod on it. The stock has M-LOK slots, so this is the attachment to use. The fit was perfect, attachment took but a moment, and the bipod is solid as a rock when mounted. It couldn't be much better.
Works fine for me!
I've got several AR-15 handguards, and they require either the M-Lok or Key-mod for mounting stuff on the handguards. I can't say at this time which I prefer, but the Magpul bipod mount worked excellent on my AR. It was rock solid and easy to change from one location to another if I need to.
I recently changed the fore-end on my rifle to M-Lok style. Because I frequently use a bipod, I wanted a minimal attachment. This is a very nice m lok bipod mount, easy to install, and much smaller overall than others.
good if you have space
Bought this with the Carbine Length MOE SL Handguard. It takes up a little too much space on a carbine length, as I also wanted to use the M-Lok AFG. Bipods mounted to it fit like they should, tight to the rifle. Out of the way. Solid mount. Just not what fits my build of a lightweight carbine. Would recommend for mid or rifle length builds where you plan to leave the bipod on. I ended up with a 3 slot rail and a QD bipod since I mainly wanted it for bench use and zeroing the rifle. As you can see in the picture though it will fit on the carbine lenght just fine, I went with the other option eventually for the lighter weight or a different bipod.
This is a must
Very lightweight, extremely low profile, excellent, does not allow the bipod to move at all. If you need a sure thing for your rifle, the magpul m-lok bipod mount would be the best one and only one I could find. Nothing negative from my use
Good M-lok Bipod adapter
This is my first M-Lok bipod mount; Magpul makes it, so it is built solid and works great. The only issue I have is it could be a little wider. Other than that, I would buy again when I need one.
Great add-on for a bipod
I recently purchased an M-Lok style handguard. I was happy to find out later that Magpul made a Harris-style bipod mount particularly for the M-lok system. My other handguards, I have had to use a clunky Picatinny adapter on the handguard. That is far from ideal. It adds unnecessary weight and bulks the rifle. And, since I don't use a bipod often, it is not worth it, so I leave off the adapter. However, with this mount, it is so light and unobtrusive, I will have no problem leaving it mounted and ready to go. (That was my intent when I bought it.) It even looks good. I can now mount my Harris bipod whenever I need without looking for an adapter. I thought that the mount was too narrow to attach the bipod securely. However, it fits my Harris bipod very well and is rock-solid. I believe the M-Lok system shows a lot of promise. The only thing that I do not like concerning the Magpul bipod mount is that the mounting screws seem to extend further into the handguard than I would like. Nevertheless, using my hand to flex the barrel, I could not make the barrel touch the screws. So, I guess all is well. But, I would have preferred that the mounting screws were a thread or two shorter. If you have an M-lok handguard, I imagine you will like this mount if you ever want to attach a Harris-style bipod.