Magpul Bipod for Sling Stud QD
The Magpul Bipod – Sling Stud QD is the next offering in the Magpul bipod line. Designed to mount on the Uncle Mike's ® Sling Swivel Stud found on most sporting rifles, the Magpul Bipod – Sling Stud QD is the strongest, most fully-featured bipod available with direct sling stud mounting capability.
The stainless-steel mounting system self-locates and aligns perfectly every time, and an ergonomic thumbwheel allow for an excellent grip to ensure easy tightening. Additionally, two sizes of non-marring, high-durometer rubber mounting gaskets are provided to ensure optimized fit and load distribution on narrow sporter-contour or wider target-style forends. The ability to mount a sling with standard locking sling swivels on the forend is maintained with a low-profile sling stud on the rear of the Sling Stud QD mount, which also provides for a quick detachment when it's needed.
Durable & Lightweight
Like our other bipods, Magpul Bipod – Sling Stud QD is exceptionally strong and built to perform under punishing field conditions. The Sling Stud QD bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 13 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.
Innovative, Adjustable, & Easy to Use
Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend almost 3.5", from 6.6" to 10.0" in length. An industry-exclusive 50° of total tilt (+/- 25 degrees on either side) is controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.
Streamlined in Design and Execution
From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.5" deep and 3.3" wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
The Sling Stud QD bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Sling Stud QD bipod's legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
The Magpul Bipod – Sling Stud QD is available in BLK or FDE colors.
Made in the U.S.A.
Magpul Bipod Sling Stud QD Install
More Bipod Quick Links:
- Rifle Bipod
The distinction between inferior quality and premium AR Bipod is undeniable. At MSP, we only offer Bipods from the most trusted brands like Harris bipod, Atlas Bipod and Magpul Bipod. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Magpul sling mount bipod - Nothing is perfect
Nothing is perfect. That's the only reason it's four stars. This is my second one. First was an M lok this is a sling stud mount small stock adapter mounted right on my Ruger Scout. Nice secure lightweight easy on/off great for a range sight in. It fits multi rifles. The large adapter works well on both my Magpul (Remington LA and SA) Hunter stocks. The only complaint is no sticker is included in the box.
magpul bipod - sling stud qd is a good choice for the money
Although attaching a bipod to a sling swivel stud isn't the strongest way for attachment, when there's no rail to use for that, this will do. I was surprised at how solidly the mechanism clamped onto the swivel stud and provided the sturdy platform I needed—an excellent value.
Magpul bipod for qd swivel stud - pretty good with a few things that buyers should know
* The bipod leg swing is 90 degrees, and there are only two positions. * The collapsed legs are over 6 inches long. From a lot of the benches and prone positions I shoot from, it would be better if it started at 5 inches. If you do not have an adjustable or short platform to shoot from, this might be a noteworthy issue for you. * They seem to slip onto any sling studs on rifles that I have without issue and without scarring rifle stocks because of the rubber cushions provided * They seem sturdy enough for the bench and prone position use but would only get four stars for ruggedness due to the plastic leg extension and plastic housing for holding the legs like a pair * The cant adjustability is OK with a big knob * The feet seem rubberized * All adjustments have positive movement and clicks (except for cant adjustment it has no clicks and you wouldn't want any there) * There is a sling stud supplied on the front
Magpul swivel stud bipod
I mounted this on a Ruger 10/22 and a DPMS LR-308... Feels great—typical Magpul high quality product.