Magpul Forward Sling Mount for Mossberg 500/590 & Remington 870
The Forward Sling Mount is a sling attachment point for the Remington 870 and Mossberg 500/590/Maverick series of shotguns which clamps onto the barrel and extended magazine tube. It can be configured for use with either Push-Button QD Sling Swivels or one-point clip-in style attachments such as the MS3 Paraclip, the HK® hook, ITW™ MASH hook, and others.
Made from precision cast steel that is Melonite® treated for wear and corrosion resistance. Dedicated fit for the Remington 870 and Mossberg 500, 590, and Maverick shotguns with an extended mag tube.
Features and Benefits of the Mossberg 500 & Remington 870 front sling attachment:
- Clamps directly to the barrel
- For use with QD sling swivels or clip-in style attachments
- Works with extended magazine tubes
- Made from precision cast steel
- Nitride finish
Magpul Sling Links:
- Magpul sling
- Magpul ms4 sling
- Magpul ms3 sling
- Magpul ms1 sling
- Magpul forward sling mount
- Magpul sling mount kit type 1
- Magpul sga sling mount
The distinction between inferior quality and premium sling mount is undeniable. At MSP, we only offer shotgun slings from the most trusted brands like Magpul. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Magpul Forward Sling Mount – Mossberg 500/590
Mounted with ease
May or may not work
I was excited about this Remington 870 front sling attachment when I first saw it. As an armorer for a law enforcement agency, I had been looking for a forward sling attachment that worked with a QD sling attachment. The Magpul mount fits the bill without the mass of some other mounts. It worked very well on some shotguns. I have many 870s in inventory with more than 20 years old. We also have a variety of magazine extensions. As previously mentioned in a review, this product will not work with every barrel/extension combination. I checked the outside dimensions of the extensions and barrel (factory barrels) with a micrometer. There is a variation in the dimensions of both the barrels and the extensions. The bottom line is if it fits on your barrel/extension combination, then it is a great product.
Rock Solid Remington 870 sling attachment
I bought this Remington 870 sling attachment because the clamp that came with my magazine extension didn't fit right. This clamp is well made and fits perfectly. The included pads will not prevent marks on your barrel from the clamp, but they do keep the brace in place under recoil. A hex nut was included if you don't want the sling mount. Highly recommended.
Nice clamp, may not fit your setup
I purchased this clamp for mounting to an 870 Police Magnum with a Wilson Combat 2+ mag ext. tube. This clamp did not fit this combination. The spacing between the barrel and ext. tube was too small. However, this clamp did fit perfectly onto the same 870 Police Magnum when used with a Remington 2+ ext. Tube. The outer diameter of the Remington ext. tube is slightly smaller than that of the Wilson Combat ext. tube. I'm rating this item a 3 for lack of published specifications regarding the supported barrel and ext. tube diameter combinations.
Excellent piece of kit!
I had been waiting for this since the release of the SGA 870 buttstock. Easy install on an 870 equipped with a magazine extension. Magpul includes self-adhesive silicone pads that are installed in cast recesses in the clamps and bear against the barrel and extension surfaces. Nice touch as I usually have to use electrical tape. If you want to use the clamp without the HK snap link hook, Magpul includes the nuts required to lock the clamping screw in place. Double-check with Magpul but it appears to be compatible with ball bearing push-button sling swivels as well. Just for grins, I did some test fits on a Mossberg 500 and 590A1. As expected, it did not fit, and it did not appear some judicious Dremel tool work would help. All in all a great piece of Magpul kit.
Solid Remington 870 sling attachment with annoying details
There can be no doubt it is a solid clamp. It's well made, excellent finish, etc. I used mine with a Nordic component +2 extension and fits both barrels. I would have given it a five, except for the following. 1) the screw that comes with it is a 1/2 hex head bolt. It is not long enough to secure the two halves of the clamp together. For anyone interested, the exact replacement you need is a grade 8, socket head 8-32 3/4" for those who aren't fastener savvy the grade 8 refers to hardness, 8-32 to the size and thread spacing, and 3/4" of course is the length. I just thought that might help anyone in a similar boat. 2) the rubber pads that I received were supposed to be self-adhesive. They are not. They required me to glue them to the inside of the clamp to keep the clamp from scratching the barrels. All in all, good product, get a longer screw and a couple of drops of super glue for the rubber pads, and you're good to go. Just odd for Magpul since everything else I've ever bought from them has been nearly flawless.
Worth the extra money.
I just got through putting this on my 870, and I'm pleased with the results. A nicely made piece that works as advertised. I would have rated it a five if it wasn't for the way it's set up for the QD arrangement. The nut (2 supplied because they know you will probably lose one) they'd like you to use are a real pain. I got around it by using the fixed sling mount instead on the opposite side. Not as clean amount that way, but loads more comfortable to handle. Also added the Magpul MS4 sling and GG&G QD receiver plate to complete the mod. It all works together flawlessly.
It clamps and looks good doing it.
I mean, it's Magpul, so what else is there to say? Although Remington 1100 was not listed as compatible, the 870 was so I took a chance. Fits perfect, and the sling mount is a nice touch, as was the included pads to save your barrel finish. Speaking of finish, it's excellent. If you're like me and the thought of throwing a $7 stamped metal, poorly finished excuse for a barrel clamp on your weapon doesn't sit right, you absolutely should spend the money.
Fits pre-1997 Mossberg 500 just fine!
I have an older Mossberg 500, and this fits it perfectly. It does not have an extended magazine tube, but there is enough room between the forend the barrel nut for it to fit.
easy to install sling mount
I've got the Magpul Forward Sling Mount on my Remington 870 Tactical Express. It was easy to install, the Mount fits great, and there are no sharp edges to snag. It's made of cast metal and has not loosened during use (there was locktite already on the screw).
I love this sling adapter
The Magpul Forward Sling Mount installs in about 5 min. Aesthetically pleasing and provides a solid point to attach the sling. Worth every cent.