Nightforce One-Piece Savage Short Action (New Style) Steel Bases w/ 20 MOA
An integral recoil lug machined on the bottom of the base provides a precise fit when bedded to the rifle's action, preventing any movement of the base or recoil stress on screws holding the base to the receiver.
The Nightforce one-piece bases are machined to exact Picatinny Mil. Std. 1913 specification rail dimensions. This design allows the same scope to be used on several different rifles, always optimizing eye relief. With 20 M.O.A. tapers. Designed for right-or left-hand actions, our bases will never interfere with loading or extraction.
Choose from a wide variety of Scope Rings
- Savage 10 20 moa scope base
- Savage 11 20 moa scope base
- Savage 12 20 moa scope base
- Savage 14 20 moa scope base
- Savage 16 20 moa scope base
- Savage 110 20 moa scope base
- Savage 110 ultralight scope base
- Savage 110 ultralight picatinny rail
- scope base for savage 110 ultralight
- Savage 110 ultralight scope rings
- Savage 110 short action picatinny rail
- 20 moa rail for savage 110
The distinction between inferior quality and premium savage 110 scope base is undeniable. At MSP, we only offer Savage Arms Accessories from the most trusted brands like Nightforce Scope Mount. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Perfect savage 10 20 moa scope base
I have a Savage 12 F/TR .223 with a Nightforce Competition scope. I routinely shoot at 100 and 600 yards. I had an opportunity to shoot 800 and was surprised that my scope ran out of elevation. I bought the 20 MOA nightforce rail, and it mounted perfectly. When I zeroed, it was exactly 20 MOA. I like it when things work.
I bought this savage 110 scope mount to
I bought this savage 110 scope mount to replace the Two-Piece Valdada base. The previous base left my scope with a slight cant about 3-4 degrees off. Once I tightened the rings to the scope, I took the rings off the base and laid them on a flat surface. The rings did not fit flush with the flat surface, therefore, giving me the 3-4 degree cant, throwing my rounds way off past 300 meters. The Nightforce single-piece fixed that problem right away. As for the base itself, I couldn't move the scope back far enough for perfect eye relief because the base was about a half-inch too long. I'm using a 4.5-14x 50mm Leupold Mark 4 LR/T scope with Mark 4 medium rings on top of a Savage mo.10FP. If you're using a 40mm scope with medium rings, this won't be an issue for you. To fix this problem, so the front of my scope wasn't hitting the base, I used a hack saw to take off that half-inch and some good flat black paint to cover the exposed steel. I could have also bought higher rings, but I didn't feel like spending another $150, and the lower the scope is to the weapon, the better it looks to me.
Very nice savage 110 scope base
Very nice part. This is my fourth or fifth one, and they have all been of high quality and fit perfectly. If you shoot Savage, this base is the one to get, particularly with a heavy scope like the Nightforce. NOTE: You should bed this rail. If you need help with the procedure, NightForce will be glad to tell you how to do it.
Rock Solid Nightforce 20 moa base of Course!!
I own 6 Savage Model 12 Target/Bench/Varmint rifles and have used this same Nightforce base to support Nightforce glass on all of them. They are built like tanks and dead nuts, perfect in their fit and alignment. I shoot 1,000 yard 8" steel gong matches which means there is no margin for error in mounting your optics, and with this base, you can be confident your foundation is rock solid.
Does not fit Savage 10 Ashbury Precision
First off, the Nightforce rail is terrific. Steel, perfect level, four screws included (Torx head). BUT - be careful if you have a Savage 10 Ashbury Precision. This rail extends an inch or so forward of the front screws and is not high enough to clear the Ashbury handguard. I just wanted to warn any Ashbury owners.
Nightforce one-piece scope mount
This is a very lovely scope mount. Previously I had tried a Weaver 20 MOA base it was crooked. This is mounted on my Savage Model 12 BVSS in .308 and works great so far. It is made out of steel, as evidenced by its weight. It just feels like a quality piece!
This Nightforce scope mount fit my Savage
This base fits my Savage mo.10FP perfectly. The only downside to this base was that it is too long for my Leupold Mark IV 4.5-14x50mm scope to fit with the medium rings I have. If you have higher rings or a 40mm scope, you'll be just fine. To fix this problem, I used a hack saw and cut off about 1/4 inch then painted it to stop rust build-up.
Great selection to choose and web site is well Organized . I mistakenly ordered the wrong base but the return Process was very easy and straight forward .