My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 4.95
Product Search

Secure Checkout
Mesa Tactical LEO® Telescoping Stock Adapter for Mossberg 500 (12-GA and 20-GA)
    Mesa Tactical LEO® Telescoping Stock Adapter for Mossberg 500 (12-GA and 20-GA)
    Purchase Mesa Tactical LEO® Telescoping Stock Adapter for Mossberg 500 (12-GA and 20-GA)
    • Mesa Tactical LEO® Telescoping Stock Adapter for Mossberg 500 (12-GA and 20-GA)
      Ratings Snapshot
      4.2
      out of 5
      5 (7)
      4 (2)
      3 (0)
      2 (1)
      1 (1)
      Would recommend this product.
      81.8%
      SKU: 133-MT-93170
      UPC: 878405001263
      Manufacturer: Mesa Tactical

    • MSRP: $90.00
      $67.45

      2 available for immediate delivery

      Quantity in Basket:  None

    •  

    Mesa Tactical LEO Telescoping Stock Adapter for Mossberg 500/590 Shotguns

    The LEO adapter, manufactured for the Mossberg 500/590 features a lowered stock elevation allowing the use of iron sights or even the bead sight. LEO adapters also accept optional stamped steel sling loop and hook loops. The LEO's low price and streamlined appearance make it the best choice for agencies looking for a simple, reliable telescoping stock at an affordable price.

    Mesa Tactical is a pioneer in the development of telescoping stocks for tactical shotguns. Telescoping stocks are necessary for operators wearing body armor, or for smaller statured shooters; a telescoping stock provides the length of pull the situation demands.

    The concept behind the telescoping stock system is simple: the shotgun's factory stock is replaced by an adapter, to which standard AR-15 grips and telescoping buttstocks can be reliably attached. All of Mesa Tactical stock adapters are investment cast aircraft aluminum, which are then CNC machined before being anodized with a Type III Class 2 mil-spec finish.

    Customer Ratings & Reviews

    11
    Ratings Snapshot
    4.2
    out of 5
    5 (7)
    4 (2)
    3 (0)
    2 (1)
    1 (1)
    Would recommend this product.
    81.8%
    4.2
    out of 5
    5 (7)
    4 (2)
    3 (0)
    2 (1)
    1 (1)
    Would recommend this product.
    81.8%
    11 Total Reviews
    Great setup for a Mossberg 500a
    5 out of 5
    Location:
    Date: August 6, 2019
    I attached the Purchase Mesa LEO Adapter for my old Mossberg 500a to correct the length of pull for me, works excellent now. Its time to hang some more Magpul on it. I will say this, once this is installed using the action release is more than a bit tricky, but shoten armory makes a great product to fix that.
    Recommended
    Very solid product
    5 out of 5
    Location:
    Date: July 15, 2019
    I had wanted to try the Mesa LEO Stock Adapter for awhile. Some extra mondy came around, so I made the plunge. I bought the entire Mesa Tactical setup for a Mossberg 590SP. Installation is straight forward. If you've done any stock swapping on an AR15 style rifle, you probably won't have to look at the directions. The stock adapter is Strong. I've looked at other stock adapters for many shotguns, and I'm happy I spent the extra bucks on this one. Thick in all the right places, and for being aluminum, it has a pleasant heft to it. I've only just put it on and not even shot the shotgun yet, but I don't see how this thing would ever fail. Indeed, there are more economical options out there, but after seeing some of them up close, and considering the real power of a shotgun, I'd sincerely question their reliability. I found out the hard way that not all aftermarket stocks are built equally on another Mossberg I have. Plus this one gives you the option to choose any MIL-SPEC type AR stock of your choice. In my case, the Magpul CTR. Just a word of note to potential buyers. Be cautious about which pistol grip you buy for this adapter. Any pistol grip with the thumb cushion will not fit, and you will need to cut the curved part flush, so it sits on the adapter at a 90-degree angle. I didn't realize this and ordered the Magpul MOE+. Not a big deal or nothing a few minutes with a hack saw won't solve, but it doesn't specify on the site, and some might be irritated by that. Magpul and Hogue both make a grip that will slip on without modification though. Mountsplus, as usual, fast shipping and excellent customer service! No complaints on either here!
    Recommended
    Buffer tube will be at an upward angle.
    1 out of 5
    Location: USA
    Date: June 18, 2019
    Mates to my Mossberg receiver just fine. Pistol grip mounting is good. Problem I have is the buffer tube is angled upward. My cheek weld is too high, compared to a stock. I'm looking at the top of the receiver, if the tube was at the correct angle the top of the receiver should disappear.
    Verified Buyer
    Kevin
    5 out of 5
    Location: FL
    Date: October 4, 2018
    The Best.
    Recommended
    Mesa Tactical adapter, you want it!
    5 out of 5
    Location: Arkansas
    Date: June 15, 2018
    I bought this to install on my Mossberg Shockwave and it works perfectly coupled with the SB-tactical SBA-3 brace! The angle coming off the receiver is straight instead of angled down. This is a much better product than the ERGO adapter in my opinion! Buy it! You won’t be disappointed!
    Verified Buyer Recommended
    If cosmetics and build quality matter, look for alternatives!!
    2 out of 5
    Location: Minnesota
    Date: April 10, 2018
    2 stars is generous. And thats only because the over priced adapter allowed me to fit a collapsable stock and pistol grip. The piece is cast from very pourous aluminum, and the finish is very bad, and the machining for the buffer tube to screw into, was off centered causing the threads to be extremely shallow on one side. The piece did assemble and install easily, and im content with it, even though it is overpriced for the “quality” you get. The function is perfect though, so that is mostly what i paid for. Mounts plus is one of my favorite places to buy parts, so this review is NO reflection on them. Just buy the cheapest version of this you can find, because you will regret paying a premium price for this.
    Verified Buyer
    My thoughts
    5 out of 5
    Location: Phoenix Az.
    Date: February 24, 2018
    Overall well made product.
    Verified Buyer Recommended
    Works fantastic, looks ok.
    4 out of 5
    Location:
    Date: March 28, 2017
    This stock adapter works as advertised 100% and was super easy to install. My only complaint is that the fit and finish of the adapter was a little sloppy. The finish was lightly scratched off in a few places, and the trigger guard did not fit completely flush to the adapter, but not a deal breaker.
    Verified Buyer Recommended
    Awesome product!!
    5 out of 5
    Location:
    Date: March 13, 2017
    The LEO stock adapter went on without a hitch, fit is very good. Great bit of kit, and feels very solid once fully assembled. Very clear directions. I almost wish I had another shotgun to buy another stock adapter.
    Verified Buyer Recommended
    Best Adapter
    5 out of 5
    Location:
    Date: February 23, 2016
    I have bought three diffrent adapters till now and, my maverick 88 has broke them all. This one is diffrent, being built out of aluminun. This is the best adapter I've ever owned for any of my long guns.
    Verified Buyer Recommended
    11 Total Reviews


    Related Products