EGW Dovetail Sight Mount For the DeltaPoint Pro with the Colt 1911/22 Rail Gun (Walther Slide 22)
Not Yet Rated | Write the First Review SKU: 198-49404
UPC: 841370115679
MFG#: EGW 49404

EGW Dovetail Sight Mount For the DeltaPoint Pro (fits Bushnell RXS-250/100, Shield RMS/RMSc/SMS & more) with the Colt 1911/22 Rail Gun (Walther Slide 22)

Mounting Hardware is Included

This Mount Fits:

• Colt 1911/.22 Rail Gun (Walther .22 Slide)

  This mount fits the Colt Rail Gun .22lr that has the slide made by Walther.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:

• Bushnell RXS-100
• Bushnell RXS-250
• Bushnell RXU-200
• Crimson Trace CTS-1500
• Holosun 407K*
• Holosun 507K*
• Holosun EPS Carry*
• Jpoint
• Leupold DeltaPoint Pro
• Optima
• Redfield Accelerator
• Shield RMS
• Shield RMSc
• Shield SMS
• Sig Romeo Zero
• Vortex Defender-CCW
• Vortex Defender-ST
• Vortex Defender-XL
• Vortex Venom (Enclosed Red Dot)

(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K to fit.)

EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Three Compatibility Checks Before Choosing a 1911 Red Dot Setup

Start with the mounting interface. The pistol model, slide configuration, rear-sight dovetail, and factory optic cut determine which 1911 red dot mount may be compatible. Compare model-specific bases, rear-sight adapters, and optic plates using the manufacturer’s published fitment information.

Next, match the optic footprint to the selected mount. Browse 1911 red dot optics by footprint, housing dimensions, viewing-window profile, reticle format, battery access, brand, price, and availability. An optic and plate should not be assumed compatible based on appearance alone.

Finally, review the supporting components for the exact pistol configuration. Mounts Plus carries compatible 1911 accessories including grips, sights, recoil components, holsters, lights, tools, and related model-specific parts from established manufacturers.

Similar-looking mounts and optics may use different dimensions or screw patterns. Use the manufacturer number and published compatibility notes as the primary references before ordering.

Compare trusted brands, confirm fitment, and shop compatible 1911 optic components at Mounts Plus.

The distinction between inferior quality and premium scope mount is undeniable. At MSP, we only offer red dot mounts from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.