My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
EGW Sight Mount For the Burris Fastfire, Vortex Venom & Viper for Kimber 1911s with Fixed Rear Sight
    EGW Sight Mount For the Burris Fastfire, Vortex Venom & Viper for Kimber 1911s with Fixed Rear Sight
    Purchase EGW Sight Mount For the Burris Fastfire, Vortex Venom & Viper for Kimber 1911s with Fixed Rear Sight
    • EGW Sight Mount For the Burris Fastfire, Vortex Venom & Viper for Kimber 1911s with Fixed Rear Sight
      Ratings Snapshot
      4.1
      out of 5
      5 (4)
      4 (2)
      3 (0)
      2 (0)
      1 (1)
      Would recommend this product.
      85.7%
      SKU: 198-49315
      UPC: 841370112890
      Manufacturer: EGW - Evolution Gun Works
      MFG#: EGW 49315

    • MSRP: $50.00
      $46.95

      Quantity in Basket:  None

    •  

    EGW Red Dot Mount for the Docter, Burris Fastfire, Vortex Venom, and Vortex Viper for Kimber Fixed Rear Sight

    Material: 7075 Aluminum
    Coating: Matte Black Hardcoat
    Overall Length: 1.811"
    Overall Width: .99"
    Dovetail Width: .355"
    Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
    Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter

    This Evolution Gun Works - EGW mounts fits:

    This mount fits:

    • Kimber 1911's with Fixed Rear Sights
    • Desert Eagle 1911G*
    • Desert Eagle 1911C*

    This mount does not fit:

    • Kimber Micro
    • Kimber Micro 9

    *This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*

    Red Dot Fitment:


    EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

    Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

    Installation Instructions
    - Remove the rear sight*
    - Install the EGW Sight Mount in the dovetail
    - Tighten set screw (if applicable)
    - Place the red dot sight on the EGW Sight Mount
    (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
    - Apply blue Loctite to the provided mounting screws
    - Torque mounting screws to 15in/lbs

    2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
    2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

    The screws that are included with this mount require a 5/64'' allen wrench for installation.

    Modification of your firearm may nullify the manufacturer's warranty.
    This product should be installed and checked by a qualified gunsmith.
    No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

     

     

    Alt Description:

    • Kimber 1911 red dot mount
    • Desert Eagle 1911G red dot mount
    • Desert Eagle 1911C red dot mount
    • Kimber 1911 Vortex Venom mount
    • Desert Eagle 1911G Vortex Venom mount
    • Desert Eagle 1911C Vortex Venom mount

    Vortex Venom Quick Links:

     


    The distinction between inferior quality and premium Vortex Venom Mount undeniable. At MSP, we only offer Red Dot Mounts from the most trusted brands like Vortex Optics. Buy with confidence that we stand behind the product we sell.

    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

    Customer Ratings & Reviews

    7
    Ratings Snapshot
    4.1
    out of 5
    5 (4)
    4 (2)
    3 (0)
    2 (0)
    1 (1)
    Would recommend this product.
    85.7%
    4.1
    out of 5
    5 (4)
    4 (2)
    3 (0)
    2 (0)
    1 (1)
    Would recommend this product.
    85.7%
    7 Total Reviews
    • 1

    Used to mount a vortex venom on a kimber custom 2

    5 out of 5
    Location:
    Date: February 3, 2023

    I intended to install a Vortex Venom on my 1911 pistol. I had plans to have the slide machined to accommodate the red dot, but due to current events, the wait time for the process is too long. Thus, this adapter provided a cost-effective solution to temporarily mount the red dot while I wait.

    Recommended

    Rock solid kimber 1911 red dot mount but mounts opposite to convention

    4 out of 5
    Location:
    Date: February 3, 2023

    Once installed, the kimber 1911 red dot mount is stable, but the taper deviates from standard sight mount procedure. Typically, sights are removed from left to right and installed from right to left, but this adapter installs from the left, contrary to conventional methods, as confirmed by EGW in response to a query. However, this information is not indicated in the instructions.

    Recommended

    Get it together

    1 out of 5
    Location: America
    Date: May 16, 2022

    Bought one mount they sent me another then told me it would be faster to just purchase another one and just return the one they already sent me… that was a little over 3 weeks ago

    Verified Buyer

    Kimber fixed rear sight

    4 out of 5
    Location: Lumsden
    Date: January 9, 2021

    Product quality is good as expected.

    Verified Buyer Recommended

    Vortex Venom Mount for Kimber 1911

    5 out of 5
    Location:
    Date: November 14, 2019

    I bought this to mount a vortex venom on my Kimber 1911. It worked out just fine, but I didn't like the setup.

    Recommended

    Vortex Venom Mount for Kimber 1911

    5 out of 5
    Location:
    Date: November 14, 2019

    I bought this to mount a vortex venom on my Kimber 1911. It worked out just fine, but I didn't like the setup.

    Recommended

    Red Dot Sight Mount for Kimber 1911

    5 out of 5
    Location:
    Date: October 30, 2019

    Good fit. It is working well so far. It is used to Mount Vortex Venom sight on Kimber 1911.

    Recommended
    7 Total Reviews
    • 1


    Related Products



    EGW Mounts

    Scope Mount