My Cart: 0 item(s)
Nightforce Ultralite Unimount 30mm Scope Rings w/ 20 MOA
The Nightforce Unimount is designed to remain on the scope at all times, allowing quick removal of the scope or interfacing with different firearms. It is the most accurate Mil. Std. 1913 mount available, incorporating a built-in 20 MOA taper to maximize long-range capability. The Unimount is the ultimate mount for attaching to weapons with an integral Mil. Std. 1913 flat top-type receiver.
Precise tolerances ensure that the riflescope is not subjected to stress, strain or bending as the ring screws are tightened. CNC machined from 7075-T6, the Unimount is finished with a matte black coatin
These mount to 1913 Mil-standard rails/bases.
 |
ID#
| Height | Height A |
|---|---|---|
| 117-NF-A190 | Medum Rings | 1.125" |
| 117-NF-A191 | High Rings | 1.375" |
Alt Description:
- Nightforce A190
- NightforceA191
Nightforce Quick links:
- Nightforce Scope rings
- Nightforce rings
- Nightforce scopes
- Nightforce scope mounts
- Nightforce Scope
- Nightforce Rifle Scopes
Alt Description:
The distinction between inferior quality and premium Scope Mount is undeniable. At MSP, we only offer 30mm Scope Mounts from the most trusted brands like Nightforce Scope Mounts. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(14)
4
(2)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(14)
4
(2)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
solid construction
FastEarle
Location:
Date:
September 14, 2022
This 30mm scope mount Holds zero, perfect fitment. Construction is solid, and workmanship is flawless—typical Nightforce quality.
Recommended
Nightforce ultralite unimount is Very light
J.
Location:
Date:
December 10, 2019
Very light and very strong! Well made. Hint: I made the embarrassing mistake of mounting the scope on backward, but found out very quickly when going to sight in and I found that my Bushnell Elite 4200 did not have enough elevation. It had me scratching my head for about 30 mins. Until I decided to flip it around. The extended ring goes towards the EYEPIECE. I didn't know. There were no installation instructions included, and this is my first scoped rifle. But the description didn't say anything about any elevation built into the mount either. No harm is done. Just to my ego! Beautifully manufactured.
Recommended
Nightforce 20 moa unimount is Awesome!
Bill
Location:
Date:
December 10, 2019
Nightforce 20 moa unimount is Awesome!! Highest quality. They are designed to be able to use one scope on more than one rifle. Use the Nightforce rails, and then this base bolts and unbolts with ease and precision. Record where the tactical knobs are sighted in on each rifle, and you can switch back and forth with just two nuts. Of course, a couple rounds to make sure the zero is perfect, but that's a small price to pay to not have to purchase multiple tactical scopes at $1300 + each!!
Recommended
Nightforce 30mm scope rings
Darrel
Location:
Date:
December 10, 2019
My purpose for buying this nightforce scope mount was to be able to use a Nightforce scope on multiple guns while working up loads to eliminate concerns about the range as a variable. I am convinced that once the scope is squared to the mount with feeler gauges(so that the crosshairs are vertical to the gun), and mounted to the gun with an accurate rail such as that which Nightforce makes, on guns of similar make and length(due to eye relief); you could literally make notes on scope settings, and then use the same scope on multiple guns with little worry about sighting the gun in when the scope is remounted in the same slots, and dialed back to the same elevation and windage (assuming the same load). Such is the accuracy of the mounts and reliability of Nightforce scope adjustment.
Recommended
Related Products
Discover the optimal performance and superior durability of our 30mm scope rings at Mounting Solutions Plus. Perfect for precision shooting and rugged outdoor activities, our Nightforce Unimount 20 MOA 30mm rings provide the strength and stability required for maintaining zero in the toughest conditions. Designed to deliver unparalleled precision, these scope rings are the go-to choice for hunters and shooting enthusiasts alike. Make your mark with the right tools - equip your firearm with our top-tier 30mm scope rings for an unmatched shooting experience. Browse through our extensive collection of scope rings and find the perfect match for your equipment today.
