Magpul PRS Lite - AR-15 Stock

12

| Write a Review

Ratings Snapshot

4.8

out of 5

5 (10)

4 (2)

3 (0)

2 (0)

1 (0)

Would recommend this product.

100%

SKU: MAG-1159

I have been using the prs lite stock on my AR10 because it provides the necessary features without being overly complex or tactical. It is a reliable and sturdy option that allows for length-of-pull adjustments, which is essential to me. Cheek risers are a nice addition, but they are not always necessary on an AR gas gun. The length-of-pull adjustment on this stock is easy to use and has remained secure even after shooting numerous high-pressure loads through my 308-caliber rifle. The fit of the stock may vary based on the tolerances of the buffer tube, but I was able to get a snug fit by using Teflon tape and wrapping the tube in a few places. Overall, I believe this is a good choice for someone who wants a semi-adjustable "fixed" stock and would consider purchasing it again in the future.

I am extremely pleased with the performance of the Magpul prs lite stock. It is well-constructed and fits snugly onto my rifle without wobbling or rattling. The length-of-pull and cheek rise is perfectly adjusted for my comfort, and the stock has a sleek and professional appearance. Compared to my previous GEN 3 model, this PRS stock is significantly lighter and easier to handle. I have used it on my 5.56 3 Gun rifle and my Aero M5 308 bench rifle and have been consistently impressed with its performance. If you have a mil-spec carbine tube, this stock is an excellent choice that will not disappoint you. I am so satisfied with it that I have purchased two of these stocks for my own use.

Installation was simple and straightforward. Literally takes less than five minutes. I read some of the other reviews and get a strong impression some folks are very green when it comes to assembling things. The only thing I don’t care for is a small amount of back-and-forth play in mine. Negligible to most, maybe, but I’m a perfectionist.

The PRS Lite is exactly what you’d imagine, a lighter version of the PRS Gen 3 but with a much more appealing price tag! Like most from the Magpul line, installation on this product was hassle free and built like an ox. The PRS Lite doesn’t have the ‘easy’ adjustments, unlike the PRS Gen 3 with the knobs, but with a hex driver, you can configure it to YOU and it will stay in place! Overall another fantastic AR15 stock from Magpul.

Fantastic build quality(as magpul products tend to be) and simple to install. Great adjustability and feels excellent to use.

The Magpul PRS Lite stock is an excellent product to install on a carbine-type rifle for the price (i.m.o.). It is straightforward to install; remove the stock currently on the carbine (if not previously released), loosen one hex head screw (with the provided hex wrench), slide the PRS Lite stock onto the buffer tube, and tighten the previously loosened hex head screw. You're done. The time required to install the PRS Lite once any existing stock has been removed (if any) is under two minutes. The LOP (length-of-pull) and the cheek rest adjustments work the same way; loosen one hex head screw for each (using the same hex wrench previously used), set the LOP and cheek rest height to your preference, then tighten the hex head screw(s) for each. Once installed, there is no stock movement (wiggle (?)) to affect your shot. As to the price I paid ($120.00 U.S., approx.) in comparison to similar stocks from other manufacturers, I think it is at an excellent price point. I bought one when it was first available and would absolutely repurchase this product without any hesitation.

Installed it on a new 6.5 Grendal build. It works as good as it looks. Very happy with it and would recommend it to everyone looking for an excellent precision stock for an affordable price.

This is a very solid AR stock if you do not want to shoot NTCH. check the LOP you want before ordering. Also, be advised that it uses a carbine buffer tube, not rifle.

I have this installed on a self-built AR-15 SPR (18" barrel). With the stock entirely collapsed, the length of pull is 13.75", which for my build is just right. I see people wanting a shorter LOP for a more lightweight, compact build, but mine is meant to be primarily a target/bench gun. I'm an average height (5' 9"), and I'm thrilled with the fit. The fit and finish are great, and I like the different look from having just a collapsible carbine stock. Note that you'll need a plain, flat receiver end plate for this to go up against. For the comb height, I adjusted it up about 1/8 inch, and I got the best cheek weld I've had on an AR-15. The best feature, and honestly the main reason I bought this, is that it doesn't snag beard hairs. All collapsible stocks I've owned occasionally snag and pull out beard hairs, which hurts like crazy. There's nowhere to snag on with this, and I consider that a big win.

Installation was simple and straightforward. It literally takes less than five minutes. I read some of the other reviews and get a strong impression some folks are very green when it comes to assembling things. The only thing I don’t care for is there is a small amount of back-and-forth play in mine. Negligible to most, maybe, but I’m a perfectionist.

I really wanted this due to my BCM stock grabbing my beard hair and the chin adjustment. I did not realize that this thing is LONG like...the longest setting on my BCM stock went... that's where this thing sits..so unless your 6ft plus....this might not work for you. i took it off and put the beard grabber back on because it's just too long for me. I'm 5'9ish 170lbs

It's great looking, but it's long. I am 6'0" tall and 175lbs with ridiculously long arms and gigantic hands like all Pennsylvania farm boys. To get a full-sight picture with my Trijicon Acog my cheek weld is further forward than the length of the adjustable comb, a good thing height is almost perfect, and length is about right but where it's at is where it's at unless I buy a mount to bring my ACOG back further.