My Cart: 0 item(s)
Magpul MBUS Pro Front Sight
Are you looking for a sighting solution that offers great efficiency while ensuring that you do not burn your pockets? The Magpul MBUS Pro is a fantastic option that will satisfy both of your requirements. The MBUS Pro has been designed to provide the greatest level of efficiency and operability while packing an amazing level of strength and robustness. It is also much lighter in weight. Whats more! All this is available well within the affordable price range of any weapon enthusiast!
The Front and Rear of the MBUS PRO is blessed with positive detents that keep them at a standard AR-15 sight elevation when they are set up. When put away they are so low that it is practically impossible to discern their presence till you actually require their use. The Front is of slender width and is flexible for use with the majority of IR Aiming lasers and other light installations for pros.
Be it the Front that is modifiable for height or Rear which is adjustable for windage (without the use of any external tools), along with the dual aperture, these ensure excellent compatibility with every 1913 Picatinny Rail Mounting Application along with Rail height gas blocks as well. The whole package has been manufactured in the United States.
Make and Dimensions of MBUS PRO – Back Up AR 15 Sight Front
- The entire product is made of Steel.
- It has been toughened and buffed using a technique called Ferritic Nitrocarburizing. This has been done to enhance its endurance capabilities against high levels of wear & tear and deterioration.
- It has been designed to be mounted on any MIL STD 1913 Picatinny or STANAG 4694 rail together with receiver height gas blocks.
- The height modifications can be done with the aid of a knob. This essentially means that no external tools are required.
- Positive Detents on the height adjusting knob and up and down positions serve to keep the front in place post set up.
- Post deployment it attains a Standard AR Sight elevation.
- The entire hardware weighs about 1.51 oz.
- The Height above rail, stowed is approximately 0.43".
- The Length, stowed comes to about 1.6".
Alt Description:
- magpul mbus pro front
- magpul mbus pro sights
Related Magpul Mbus Links
- magpul mbus
- mbus sights
- magpul mbus set
- mbus
- magpul sights
- magpul iron sights for ar 15
- magpul flip up sights
- magpul buis
- mbus sight set
- mbus set
- magpul mbus sight set
- magpul mbus sights
- magpul iron sights
- magpul flip up front sight
- magpul mbus gen 2 sights
- magpul mbus gen 3
- mbus gen 3
- magpul mbus 3
- mbus 3
AR 15 Sight Quick Links:
- AR 15 sights
- BUIS
- Carry Handle sight
- Fiber Optic AR sights
- Dueck Defense rapid transition sight
- PRI Front sight gas block
- ARMS #40
- ARMS 41 bl silhouette
The distinction between inferior quality and premium AR Sights is undeniable. At MSP, we only offer AR Accessories from the most trusted brands like Magpul MBUS. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(9)
4
(0)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(9)
4
(0)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
9 Total Reviews
- 1
You betcha! In Magpul we trust!
Adam
Location:
Date:
May 19, 2021
A nice thin front sight blade makes it easy to see a 4-inch bullseye at 100 yards. Lightweight, low profile, all-metal. I have two sets on rifles and will buy more as I need them. Magpul doesn't make junk! Buy both, front and rear, as a set.
Recommended
Good Sight
Jeremiah
Location:
Date:
May 19, 2021
High quality, All metal construction, adjustable elevation by hand/ no tools needed, a very positive hinge mechanism, low profile, nice fit and finish, very tough, and when paired with a MBUS Pro adjustable all steel flip-up rear sight- perfection. The price is expensive but, I think these sights will last the lifetime of the firearms they are installed on.
Recommended
Mbus pro front sight is Great
Anonymous
Location:
Date:
May 19, 2021
For the longest time, I was using the Magpul polymer MBUS sight set pretty much like most everyone else, and I've had a love/hate relationship with them. I loved that they would spring up and somewhat lock in position and are VERY durable, but I didn't care for the sheer bulkiness of them. When I saw that Magpul started selling a STEEL folding sight set I had to check it out. First, off you will notice how slim & trim they are with nothing hanging off the side of the rails. They are also very lightweight and they fold VERY flat!! I am now able to have an optic mounted directly over my rear sight without needing to remove the rear sight. The front sight "locks" into detents but will move free if bumped with enough force. That is actually a good thing to prevent damage. Also, the sight pin itself is a little smaller and presents a much more precise aiming point. It's also now fingering adjustable, so no more special tool is needed to make adjustments. The only gripe that I have is that I can't read the writing for which direction I need to turn the knob to raise the sight because the lettering is very tiny. I wear glasses, and I still can't read the lettering. Overall the sight and the set are excellent and present a great sight picture. Yes, they are pricy but compared to other steel sights, you will find that they are the same or even cheaper than others.
Recommended
Good Back up.
Andrew
Location:
Date:
February 6, 2020
I use this Magpul mbus pro front sight on a Rugger SR556e. This is good as a set for back up sights, but I would not use this for a stand-alone iron sight, just a backup. It can be a bit difficult to adjust elevation. Also, it is slightly tricky to snap up into position. But all of these cons may go away with some time and more use. Overall its excellent quality and works well out to 300m on the range.
Recommended
Love the Magpul mbus front sight and will buy it again.
John
Location:
Date:
November 16, 2019
Love the quality of this AR sight. I put it on my latest Aero Precision AR-15 build. The fit and finish of the magpul pro sight is perfect, and it looks outstanding on the front of my Atlas S,one 15 inch M loc handguard.
Recommended
Magpul pro mbus Front Sight is a great sight
Tommy
Location:
Date:
November 16, 2019
The Magpul buis pro Very lightweight, very low profile when folded down, and no tools needed to make adjustments. Very nice sight
Recommended
The Magpul pro front sight are Excellent, light, tough, low profile!
Fred
Location:
Date:
November 16, 2019
Magpul pro front sight This is a much lower profile than I expected. I bought it to complement my Magpul MBUIS rear. However, I expected that they would be roughly the same size, and was really surprised to see how small the Pro version was. It fits on top of my Adams Arms gas block. Therefore it needed to be steel to cope with the heat. Very positive up and down. A bit harder to deploy as you have to tug on it to get it to move, but it only takes a bit of getting used to. What I don't like about it is that it rests against the rail when not deployed, and I imagine that can hurt the finish below. Also, since there is no lock in the up position, it CAN be knocked down, unlike the YHM or others. Finally, there is no Quick Deployment button or lever on these AR Sights, and you have to swing it up manually. All-in-all, if you know these are going into it and don't expect it to have those features, you'll be alright.
Recommended
Magpul pro front sight
Fred
Location:
Date:
November 16, 2019
This is a much lower profile than I expected. I bought it to complement my Magpul MBUIS rear. However, I expected that they would be roughly the same size, and was really surprised to see how small the Pro version was. It fits on top of my Adams Arms gas block. Therefore it needed to be steel to cope with the heat. Very positive up and down. A bit harder to deploy as you have to tug on it to get it to move, but it only takes a bit of getting used to. What I don't like about it is that it rests against the rail when not deployed, and I imagine that can hurt the finish below. Also, since there is no lock in the up position, it CAN be knocked down, unlike the YHM or others. Finally, there is no Quick Deployment button or lever on these AR Sights, and you have to swing it up manually. All-in-all, if you know these are going into it and don't expect it to have those features, you'll be alright.
Recommended
Magpul mbus pro front sight is a buy
Aaron
Location:
Date:
November 16, 2019
The MBUS Pro front sight has a Great fit and finishes, very strong detents on all moving parts, seem tiny in comparison to the standard mbus's, yet are the same height when folded up. These AR sights are a little pricy, (still less than most comparable models) but in my opinion the best option out there.
Recommended
9 Total Reviews
- 1
Related Products
