Ruger M77 Picatinny Rail - Long Action (MUST DRILL & TAP RECEIVER)

1

| Write a Review

Ratings Snapshot

5.0

out of 5

5 (1)

4 (0)

3 (0)

2 (0)

1 (0)

Would recommend this product.

100%

SKU: 198-4612
Manufacturer: EGW - Evolution Gun Works

EGW Ruger M-77 Long Action Picatinny Rail Mounts (MUST DRILL & TAP RECEIVER)

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 4.215"
Overall Length: 6.670"

This mount is sold DRILLED for 8-40 screws and is available in a 0 or 20 MOA and is specifically made to fit the Ruger M77. This Evolution Gun Works - EGW mounts will require you to drill and tap your receiver.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

*The center spread is the distance between the two middle holes, center to center, on your receiver.

This base sits at approximately 0.4” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This Evolution Gun Works - EGW mounts is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

 

EGW Product #

• #46120 - Ruger M-77 Long Action Picatinny Rail Mounts (MUST DRILL & TAP RECEIVER) 0 MOA Ambidextrous
• #46122 - Ruger M-77 Long Action Picatinny Rail Mounts (MUST DRILL & TAP RECEIVER) 20 MOA Ambidextrous

Ruger M77 Quick Links

• ruger m77 mark ii scope rings
• scope rings for ruger m77 mark ii
• ruger m77 scope base
• ruger m77 mark ii picatinny rail
• ruger m77 rail
• ruger m77 scope rings
• ruger m77 34mm scope rings
• picatinny rail for ruger m77 long action
• scope mounts for ruger m77 mark ii
• ruger m77 scope rail
• one piece scope base for ruger m77
• ruger m77 mark 2 scope mounts
• picatinny rail ruger m77
• ruger m77 30mm scope rings
• ruger m77 scope mount adapter
• ruger m77 rings
• ruger m77 bipod
• ruger m77 accessories

 

Choose from a wide variety of Scope Rings

• scope rings
• tactical scope rings
• 1 inch scope rings
  • 1 Inch Picatinny Scope Rings
• 30mm scope rings
  • 30mm Picatinny scope rings
• 34mm scope rings
  • 34MM PICATINNY SCOPE RINGS
• 35mm scope rings
• nightforce rings
• nightforce scope rings
• weaver scope rings
• arms scope rings
• picatinny scope rings
• quick detach scope rings
• quick release scope rings
• qd scope rings
• extra high scope rings
• extra high scope rings picatinny
• barrett scope rings
• vortex scope rings
• nightforce xtreme duty rings
• egw scope rings