EGW Steel HD Remington 700, 721, 725 Long Action Picatinny Rail Scope Mount
86100 mounts manufactured after 12/2020 are drilled to accommodate larger diameter screws (#8-40) and now come with #6-48 and #8-40 screws. The head diameter on the #6-48 screws provided with this mount is larger than our normal #6-48 screws.
The blue bag of screws provided are #6-48 screws.
The red bag of screws provided are #8-40 screws.
Mounting Hardware is Included
This mount fits:
Bergara B14 Long Action (#6 Screws)
Bergara Premier Long Action (#8 Screws)
Remington 700 Long Action
Remington 700 Long Action (#8 Screws)
Remington 700 Long Action Police Tactical (#8 Screws)
Remington 721 Long Action
Remington 725 Long Action
Christensen Arms Long Action
Mauser M18 (All Calibers)
Sauer 100 (All Calibers)
Sauer 101 (All Calibers)
Rail Type: One Piece Picatinny
Machined From: Solid 4140 Carbon Steel
Center Spread: 4.485"
Overall Length of Mount: 7.064"
Height: .35" (Top of Receiver to Top of Picatinny)
Weight: 2.5 oz
Quick Disconnect Ring Compatible: Yes
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: #6-48 X 1/4 Screws, #8-40 X 1/4" Screws and T-10 Bit Included
Torque Specs: 20 in/lbs
Compatible with: Picatinny or Weaver scope rings.
This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 721, and 725. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and parkerized for long lasting durability.
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
30 MOA - if shooting 1000-1500 yards
40 MOA - if shooting 1500+ yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
EGW Product #
#86100 - Steel HD Remington 700, 721, 725 Long Action Picatinny Rail Scope Mount 0 MOA Ambidextrous
#86102 - Steel HD Remington 700, 721, 725 Long Action Picatinny Rail Scope Mount 20 MOA Ambidextrous
- Bergara B14 Picatinny Rail
- Bergara Premier Picatinny Rail
- Remington 700 Picatinny Rail
- Remington 721 Picatinny Rail
- Remington 725 Picatinny Rail
- Christensen Arms Picatinny Rail
- Mauser M18 Picatinny Rail
- Sauer 100 Picatinny Rail
- Sauer 101 Picatinny Rail
The distinction between inferior quality and premium Remington 700 scope mount is undeniable. At MSP, we only offer Remington 700 Accessories from the most trusted brands like EGW Mounts. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
EGW HD Remington 700
Evolution Gun Works HD Scope Rail Remington 700 really like the rail vary high quality for the price. Had no problems installing, like that it made of 7075 aluminum. Not sure if I got lucky but didn't need to be beded. I could not side a little piece paper under the front or rear when tested. very happy with this purchase.
HD Remington 700 Scope Mount
Fits what it is supposed to fit.