My Cart: 0 item(s)
EGW Dovetail Sight Mount For the Trijicon RMR / SRO, Holosun 407c / 507c for Ruger PC Carbine
Mounting Hardware is Included
This Mount Fits:
- Camp Carbine 9mm (does not fit the early models, the hole spacing is different)
- Camp Carbine 45
- Glenfield 30
- Henry Big Boy (H006)
- Henry 3030 (H009)
- Henry 4570 (H010)
- Henry Big Boy (H012)
- Henry Long Ranger (H014)
- Henry .410 (H018) Only fits the 20" Barrel
- Henry Side Gate Lever Action (H024)
- Henry Long Ranger
- Henry Homesteader (must use rear holes on receiver)
- Marlin 1895
- Marlin 1894
- Marlin 336
- Marlin 375
- Marlin 444
- Marlin Model 36
- Ruger PC Carbine*
*This mount only works with the Ruger PC Carbines that do not have the AR style handguard.
We have found that the included screws may need to be shortened due to dimensional differences in receivers.
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment:
- Trijicon RMR
- RMR for sale
- Trijicon SRO
- Holosun HE407C
- Holosun HE407C X2
- Holosun HE507C
- Holosun HE507C X2
- Holosun HS407C
- Holosun HS407C X2
- Holosun HS507C
- Holosun HS507C X2
- Swampfox Kingslayer
- Swampfox Liberty
- Swampfox Justice
EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Alt Description:
- Ruger PC Carbine RMR Mount
- Henry Golden Boy RMR Mount
- Henry Long Ranger RMR Mount
- Marlin 1894 RMR Mount
- Marlin 1895 RMR Mount
- Ruger PC Carbine Holosun 507c Mount
- Henry Golden Boy Holosun 507c Mount
- Henry Long Ranger Holosun 507c Mount
- Marlin 1894 RMR Holosun 507c Mount
- Marlin 1895 RMR Holosun 507c Mount
- Ruger PC Carbine Holosun 407c Mount
- Henry Golden Boy Holosun 407c Mount
- Henry Long Ranger Holosun 407c Mount
- Marlin 1894 RMR Holosun 407c Mount
- Marlin 1895 RMR Holosun 407c Mount
- Ruger PC Carbine Red Dot Mount
- Henry Golden Boy Red Dot Mount
- Henry Long Ranger Red Dot Mount
- Marlin 1894 RMR Red Dot Mount
- Marlin 1895 RMR Red Dot Mount
Trijicon Quick links
Ruger PC Carbine Quick Links:
- ruger pc carbine magpul stock
- magpul backpacker pc carbine
- pc carbine stock
- ruger pc carbine magpul
- ruger pc carbine stock
- magpul pc backpacker stock
- magpul ruger pc carbine
- ruger pc backpacker
- ruger pc carbine backpacker
- magpul pc carbine
- ruger pc carbine red dot mount
- ruger pc carbine picatinny rail
- ruger pc carbine rail
- ruger pc carbine accessories
- pc carbine accessories
The distinction between inferior quality and premium Ruger PC Carbine mount is undeniable. At MSP, we only offer Ruger PC Carbine Accessories from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Be the first to rate this item!
Write Review
