My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
Burris AR-P.E.P.R. 1" Mount w/ Picatinny Top
    Burris AR-P.E.P.R. 1" Mount w/ Picatinny Top
    Purchase Burris AR-P.E.P.R. 1" Mount w/ Picatinny Top
    • Burris AR-P.E.P.R. 1" Mount w/ Picatinny Top
      Ratings Snapshot
      5.0
      out of 5
      5 (9)
      4 (0)
      3 (0)
      2 (0)
      1 (0)
      Would recommend this product.
      100%
      SKU: 126-BUR-410343
      UPC: 000381103420
      Manufacturer: Burris

    • MSRP: $107.00
      $83.75

      This Item is out of stock, but is available for a back-order. Please be aware that there may be a delay in shipping. Your credit card will not be charged until we ship the product.

      Quantity in Basket:  None

    •  

    Burris AR-P.E.P.R. 1" Scope Mount

    The Burris AR-P.E.P.R. Quick Detachable Mount is perfect for mounting your scope forward on your AR-style rifle. The Proper Eye Position Ready (P.E.P.R.) Mount provides 2" of forwarding scope positioning room, which will allow you to obtain proper eye relief and maintain an appropriate position of shooting. Choose between the permanent attachment style or the quick detach option, which will enable you to remove and replace your optic quickly. Includes both smooth and Picatinny ring tops.

    • Full ring and base mounting solution in one
    • Allows up to 2 inches of forward scope positioning
    • Provides optimum eye relief and full field of view
    • Includes both smooth and Picatinny ring tops
    • Quick-detach models allow for fast mounting

    See Spec tab for specific sized mounts

    Spec

    *410345 has 20 MOA of cant built in

     

    Specs
    PART # SIZE WEIGHT A B C D E Quick
    Detach
    410343 1 in 8.3 oz. 1.00 1.57 1.50 4.15 2.15 NO

     


    The distinction between inferior quality and premium burris pepr scope mount is undeniable. At MSP, we only offer Mounts from the most trusted brands like Burris. Buy with confidence that we stand behind the product we sell.

     

     

     

     

    Customer Ratings & Reviews

    9
    Ratings Snapshot
    5.0
    out of 5
    5 (9)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    5.0
    out of 5
    5 (9)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    9 Total Reviews
    • 1

    My Favorite AR Scope Mount

    5 out of 5
    Location:
    Date: February 27, 2020

    I have several AR 15 rifles. The Burris AR-pepr mount has been my favorite by far. The height is perfect, the mount seems to be very well made and the cantilever puts the eye relief right in the sweet spot. I am getting ready to order my third.

    Recommended

    Burris 1" & 30mm dia. AR-PEPR scope

    5 out of 5
    Location:
    Date: February 27, 2020

    I purchased a 1" and a 30mm dia. Burris AR PEPR scope mounts to accommodate a Burris and Vortex scope for my AR rifles. Both scope mounts fit perfectly, and I was able to sight in within 4-5 shots. The Burris scope mount also allowed me to install a Caldwell brass catcher base mount just before the charging handle (back end of upper receiver Picatinny rail). With six screws per ring (12 screws total) I doubt this will ever come loose. The height of the mount is perfect for mounting a scope on a AR format rifle.

    Recommended

    Looks good but......

    5 out of 5
    Location:
    Date: February 27, 2020

    I purchased a 30mm version of this Burris AR pepr mount for an AR15 for use with a Leupold VX-R. Even though it is made in China, I decided to try it out. The mount is well designed and has an excellent finish and fit. The sight height is excellent, and cantilever put it in a very intuitive position. All of this would be great if the scope mounting bore were parallel to the base. It puts the point of impact 6" low at 18 yards after my elevation is maxed out. I'm almost out of windage also but was able to get the point of impact centered.

    Recommended

    Excellent product - glad I chose it

    5 out of 5
    Location:
    Date: February 27, 2020

    This Scope base installed very quickly on my Armalite - the adjustments to make sure the QD holds tight to the base are precise and easy, took less than 3 minutes. I installed a weaver scope and took the rifle to the field to sight in. Took the scope off and shot with a red dot for a while and re-installed the scope - shot in precisely the same spot as before - no problems what so ever. I would highly recommend the Burris ar-pepr mount.

    Recommended

    great AR scope mount

    5 out of 5
    Location:
    Date: February 27, 2020

    Just put on my Burris AR PEPR 1" scope mount. The cantilever design allows you to mount it entirely to the upper receiver. Other mounts may require you to use your free float rail as well. If the upper receiver and the free float rail are not perfectly aligned or they shift relative to each other for any reason, you may have issues sighting in your scope. This is not detailed in the description, but it does come with the smooth ring tops like the quick-detach version that is $20 more. Aluminum construction, but still very solid. The two locking nuts could be a bit lower profile, but it is not so apparent once everything is mounted. They are reasonably priced too. I bought it based on the two recommendations on

    Recommended

    Most Versatile to Use

    5 out of 5
    Location:
    Date: February 27, 2020

    The Burris AR-p.e.p.r Very well made mount puts scope out to a position where eye relief is perfect. Mounted the new Maglite XL200 (173 lumens) using Weaver 1" High Matt rings. This set up works well out to 100 yards and beyond in total darkness. A high quality/durable set up and looks good too.

    Recommended

    awesome product

    5 out of 5
    Location:
    Date: February 27, 2020

    The Burris AR Pepr very well constructed scope mount, sits my Leupold mark ar as close to my Magpul buis as you can get wt out touching. The rails are nice for mounting reflex sights, lasers, or anti cant devices. The only way it could be better is if it had the throw lever set up, but for the price, i have no problem using a screw driver. the truth is once you mount a scope, you really don't go back to irons unless you have to, but even if you disagree i don't think its worth spending double the money to take a $2 screw driver or socket out of the picture. gave it five stars because it does what it should and looks good doing it.

    Recommended

    Solid and "tactical."

    5 out of 5
    Location:
    Date: December 24, 2019

    I bought the permanent mount for a flat top AR. Put the scope in the perfect forward position with a notch to spare. A surprise was the extra set of top halves without the mini rail. I went with the rail tops for a sexier look. The three screws per side give it a brutish and tactical look. I also liked that the nuts on the rail clamp are hex instead of knurled. I considered buying the quick detach version, but I'm glad I didn't. Very happy with the purchase.

    Recommended

    Impressive Mount

    5 out of 5
    Location:
    Date: December 24, 2019

    I bought the 1" rings / permanent mount for a more secure reason. It is "Proper Eye Position Ready." I paired it with a Bushnell AR Optics 4.5x18x40mm scope. I'm happy... (not recommended for light-weight applications)

    Recommended
    9 Total Reviews
    • 1