My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
CDM Gear ROC-12 Shotgun Light Mount & Barrel Clamp
    CDM Gear ROC-12 Shotgun Light Mount & Barrel Clamp
    Purchase CDM Gear ROC-12 Shotgun Light Mount & Barrel Clamp
    • CDM Gear ROC-12 Shotgun Light Mount & Barrel Clamp
      Ratings Snapshot
      4.8
      out of 5
      5 (12)
      4 (0)
      3 (1)
      2 (0)
      1 (0)
      Would recommend this product.
      92.3%
      SKU: 130-CDM-ROC-12
      UPC: 853954005313
      MFG#: ROC-12

    • MSRP: $39.95
      $35.95

      Quantity in Basket:  None

    •  

    CDM Gear ROC-12 Light Mount & Barrel Clamp

    The ROC-12 is made from new aluminum 1 piece clamp halves that have the rail formed into the clamp. The whole unit weighs 2.4oz. It is super low profile at about a 1/2" away from the barrel with a curved, 3 slot rail that reduces hang ups and snags. It only uses 2 bolts that correlate the 2 halves to reduce incorrect mounting. The fingers at the top of the clamp make it easy to ascertain top from bottom and allow mounting to ribbed and ported barrels. It fits within a 1.25" space on your magazine tube and includes our no slip grip pads and a wrench. The best part is that the MSRP is $39.95. The ROC-12S is the same but adds a sling swivel dock built right in for $44.95.

    12 GA. Fits shotguns with 1" of space on a 1" magazine tube.
    Best fitted for these Shotguns:

    • Remington 870, 1100, 1187,
    • Benelli M1/M2/M4/M104 (not SuperNova),
    • Mossberg 500 7 shot, 590 (not the 590A1 or SPX models),
    • Winchester 1300, 1200 and SXP Defender

    Alt Description:

    • cdm clamp
    • cdm gear
    • cdm gear clamp
    • shotgun barrel clamp picatinny rail
    • barrel clamp picatinny rail
    • barrel clamp flashlight mount
    • shotgun picatinny rail barrel mount
    • 12 gauge shotgun flashlight mount
    • picatinny rail barrel clamp
    • 12 gauge barrel clamp
    • clamp on picatinny rail
    • shotgun barrel clamp with rail
    • shotgun barrel mount picatinny rail

     

    Shotgun light mount Quick Links:

    Shotgun Quick Links:

    Light Mount Quick Links:

     


    The distinction between inferior quality and premium shotgun flashlight mount is undeniable. At MSP, we only offer Shotgun Accessories from the most trusted brands like CDM Gear. Buy with confidence that we stand behind the product we sell.

     

    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

    Customer Ratings & Reviews

    13
    Ratings Snapshot
    4.8
    out of 5
    5 (12)
    4 (0)
    3 (1)
    2 (0)
    1 (0)
    Would recommend this product.
    92.3%
    4.8
    out of 5
    5 (12)
    4 (0)
    3 (1)
    2 (0)
    1 (0)
    Would recommend this product.
    92.3%
    13 Total Reviews

    Light mount

    3 out of 5
    Location: MI
    Date: April 15, 2023

    It's well made and has pic rails on right and left side however the "wings" that cradle the barrel do not allow for barrel removal. Mount must be loosened or removed to disassemble gun for cleaning. Not ideal if you decide to mount anything that requires zeroing.

    Verified Buyer

    CDM Gear ROC-12 Shotgun Light Mount & Barrel Clamp

    5 out of 5
    Location: Washington
    Date: April 11, 2023

    Fits well on 870 tactical.

    Verified Buyer Recommended

    Great quality, great price

    5 out of 5
    Location:
    Date: December 27, 2022

    I purchased this clamp to mount my 870 with a Wilson Combat/Scattergun Technologies extension. The extension itself doesn't necessarily require a clamp, but I wanted added stability and a convenient way to attach a light. The CDM clamp exceeded my expectations and was very easy to install with the included instructions. Its wide clamping area provides a strong hold, unlike other clamps, such as Remington's, which have a narrower clamping area. Additionally, the split section on the top allows for compatibility with a ported barrel or rifle sights without interference. Overall, this is the best shotgun clamp available on the market.

    Recommended

    Fit my Mossberg 930 perfect

    5 out of 5
    Location:
    Date: December 27, 2022

    I had no issues attaching this to my Mossberg 930 with the extended Nordic magazine. To prevent scratching the finish on the barrel and magazine, I applied black electrical tape to the inside of the clamp. It's important not to overlap the tape but rather to start at the end of the clamp and add additional pieces of tape where the last one ends. Some people may be concerned that the tape will melt if the barrel gets too hot, but it's important to note that electrical tape is insulating that can withstand high temperatures. I've tested this by using the plus 8 shot Nordic magazine extension (which holds 8+4 in the magazine and 1 in the chamber) and firing as fast as I could multiple times, and the tape has not melted.

    Recommended

    This a great fit for my Winchester SXP Defender 18"

    5 out of 5
    Location:
    Date: December 27, 2022

    After a lengthy search, I finally found the CDM Gear ROC-12 light mount that seemed like a good fit for my Winchester SXP Defender with an 18" barrel. Despite not being able to find any reviews specifically mentioning compatibility with my shotgun, I decided to take a chance and order the mount. The mount arrived quickly and was packaged in a plastic bag with a cardboard top and a small Allen wrench. It took only a few minutes to install, and it fit perfectly on my shotgun. I had no issues attaching an Olight Baldr Mini to the mount, and the ROC-12 seemed well-constructed and didn't add much weight to my shotgun. I haven't had the opportunity to take this setup to the range to see how it performs after firing a few rounds, but so far, I'm pleased with it. The only thing to note is that if you have a small or short light like the Baldr Mini that doesn't extend down towards the end of the barrel, you may get a shadow on one side from the barrel (depending on which side you place the light). A traditional flashlight with a ring adapter may not have this issue, but I'm happy with my current setup. In summary, if you have a Winchester SXP Defender with an 18" barrel, the CDM ROC-12 light mount is a good choice for adding a light attachment.

    Recommended

    Great shotgun light mount!

    5 out of 5
    Location:
    Date: December 27, 2022

    I recently purchased shotgun light mount product for my Stevens 320 shotgun. Upon receiving it, I was pleased to find that it was well made and fit perfectly on my firearm. I made a video review on my YouTube channel, Full Metal Grandpa, and gave it my stamp of approval. The only issue I encountered was that the threads were slightly rough, but I fixed this by running an 8-32 tap over them. I marked the mount's position on my shotgun before testing it at the range, and it stayed firmly in place even after firing multiple rounds of military-grade buckshot. Overall, I am delighted with this purchase."

    Recommended

    Perfect!!

    5 out of 5
    Location: Ohio
    Date: August 24, 2022

    Just what I was looking for. It holds my LED light + green laser close to the forearm stock. Great fit. Will purchase more for other weapons!

    Verified Buyer Recommended

    CDM Gear clamp 870 is a good mount

    5 out of 5
    Location:
    Date: March 23, 2021

    Fit perfectly on the 870. Great quality. Easy install.

    Recommended

    Great barrel clamp light mount

    5 out of 5
    Location:
    Date: March 23, 2021

    I needed a way to attach a light to my 12 gauge, and this mount is just what i needed.

    Recommended

    Sleek Shotgun Light Mount

    5 out of 5
    Location:
    Date: March 23, 2021

    A bit pricey but worth it for my Remington870! I am satisfied with the sleek and clean look. I love it thanks!

    Recommended

    Steven's 320

    5 out of 5
    Location: OH
    Date: June 2, 2020

    Great product! Fit is perfect on my Steven's savage 320. Honestly, the clamp is machined so well that I would venture to say it reinforces the structure of the shotgun. Fit and finish are perfect. Within the minimal packaging are instructions that you probably won't need and some small double sided sticker-type-deals to put between the clamp and the tube. I don't often write reviews but I do love this thing.

    Verified Buyer Recommended

    Greg

    5 out of 5
    Location: Midwest
    Date: May 28, 2020

    Fit and finish as expected with high quality hardware and great experience with seller, Mounting Solutions Plus, highly recommended.

    Verified Buyer Recommended
    13 Total Reviews


    Related Products