My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
EGW Savage 93 (1-5/8" Ejection Port) Savage Mark II Picatinny Rail Scope Mount
    EGW Savage 93 (1-5/8" Ejection Port) Savage Mark II Picatinny Rail Scope Mount
    Purchase EGW Savage 93 (1-5/8" Ejection Port) Savage Mark II Picatinny Rail Scope Mount
    • EGW Savage 93 (1-5/8" Ejection Port) Savage Mark II Picatinny Rail Scope Mount
      Ratings Snapshot
      4.9
      out of 5
      5 (11)
      4 (1)
      3 (0)
      2 (0)
      1 (0)
      Would recommend this product.
      100%
      SKU: 198-4160
      Manufacturer: EGW - Evolution Gun Works

    • MSRP: $40.00
      $35.99

      Quantity in Basket:  None

    •  

    EGW Savage 93 (1-5/8" Ejection Port) Picatinny Rail Scope Mount

    This mount fits:

    • Savage 93
    • Savage MK II with 1-5/8" ejection port
    • Stevens 310

    *Please note, older Savage MK II rifles come with a 1-3/8" ejection port and utilize our Savage MK II scope mounts. Please measure the size of your ejection port prior to ordering to ensure the right fit.*

    Rail Type: One Piece Picatinny
    Machined from: Domestic 6061 T6 Extruded Aluminum
    Finish: Matte Black Anodizing
    Center Spread: 3.345"
    Overall Length: 5.882"
    Height: .4" (Top of Receiver to Top of Picatinny)
    Weight: 2 oz.
    Quick Disconnect Ring Compatible: No
    Ambidextrous: Yes
    Torque Specs: 20 in/lbs
    Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
    Compatible with Picatinny Scope Rings or Weaver scope rings.

    This mount comes standard with a bevel on both sides making it ambidextrous.

    Evolution Gun Works recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

    Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

    We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

    Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

    We recommend:
    0 MOA - if shooting 0-150 yards
    20 MOA - if shooting 150-300 yards

    The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

    EGW Product #

    • #41600 - Savage 93 (1-5/8" Ejection Port) Picatinny Rail Scope Mounts 0 MOA Ambidextrous
    • #41602 - Savage 93 (1-5/8" Ejection Port) Picatinny Rail Scope Mount 20 MOA Ambidextrous

     

     

     

    Alt Description:

    • savage mark ii scope mount
    • savage mark ii scope base
    • savage mark ii picatinny rail
    • savage 93r17 picatinny rail
    • savage 17 hmr picatinny rail
    • picatinny rail for savage 93r17
    • Savage 93 picatinny rail scope mount
    • savage 93 scope base
    • savage 17 hmr scope mount
    • savage model 93 scope base
    • best scope for savage 93r17
    • savage 93 picatinny rail

    Choose from a wide variety of Scope Rings

    EGW Quick Links


    The distinction between inferior quality and premium Savage Arms Accessories is undeniable. At MSP, we only offer Scope Bases from the most trusted brands like EGW Mounts. Buy with confidence that we stand behind the product we sell.

    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

    Customer Ratings & Reviews

    12
    Ratings Snapshot
    4.9
    out of 5
    5 (11)
    4 (1)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    4.9
    out of 5
    5 (11)
    4 (1)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    12 Total Reviews
    • 1

    Savage Mark II Picatinny Rail

    5 out of 5
    Location:
    Date: February 3, 2023

    I needed more eye relief for my target scope on my Savage Mark II and after research, I bought the EGW 41600 rail. It was a perfect match with the 1-5/8" ejection port and allowed me to mount the scope further forward to achieve the required eye relief. The installation was a breeze and it fit perfectly using the stock Savage Mark II ring mounting points.

    Recommended

    Perfect Fit

    5 out of 5
    Location:
    Date: February 3, 2023

    The Savage 93 22 WMR rail purchased fits perfectly to the "E" receiver without needing bedding. Four torx screws are included and I used Loctite 222 purple, although EGW recommends blue torqued to 20 in lbs. The machined port length of the rail matches the receiver port at 1 5/8". The mounted rail is approximately 10mm high and an O.D. 51mm bell has 10mm clearance with .485 height rings and flip-up covers. This product is well-made and fits the rifle nicely, and is also available in 20 MOA. I highly recommend it.

    Recommended

    whats on the tin

    5 out of 5
    Location:
    Date: February 3, 2023

    This savage mark ii picatinny rail was a perfect fit for my rifle. Installation was straightforward and I was pleased with the end result. Although the price was on the higher side, I trusted the quality and accuracy of the product description and am happy with my purchase.

    Recommended

    The description could be a bit better. This mount is specifically for the Savage 93

    5 out of 5
    Location:
    Date: February 3, 2023

    This mount fits my Savage 93 perfectly with its 1-5/8" ejection port. It was a bit confusing at first as some reviews mentioned misalignment, which I later realized was likely due to ordering the wrong mount for their Savage Mark II. It's important to accurately identify your firearm before ordering as there is a separate mount for the Mark II and the model 93. The description could be more clear. Nevertheless, I am happy with the fit and quality of the mount.

    Recommended

    Quality savage mark ii scope mount.

    5 out of 5
    Location:
    Date: February 3, 2023

    My brother easily installed this top-notch savage mark ii scope mount and a scope on my new rifle. We then had a great time shooting at targets. I can't wait for the pesky groundhog to return so I can use my upgraded setup. This product is a great value.

    Recommended

    Exactly the right fit

    5 out of 5
    Location:
    Date: February 3, 2023

    I purchased this rail for my Savage Mark II rifle. It fits perfectly and is ideal for mounting a scope. There are two different sized Savage Mark II models, one with a 1⅜ inch ejection port and the other with a 1⅝ inch port. This rail is designed to fit the 1⅝ inch model. It's important to measure before buying. For the 1⅝ inch model, this rail is a great fit and I am very pleased with both its appearance and quality.

    Recommended

    Worth it

    5 out of 5
    Location:
    Date: February 3, 2023

    This purchase was an impulse buy for my Savage Mark ii BTVS 22lr build, but I am happy I went for it. The savage mark ii scope base price is average for a picatinny rail, especially for a rimfire product, but the quality is top-notch. Made in America with great fit and finish, everything was included, including torque specs and screws. I paired it with Warne low rings and a Nikon Prostaff Rimfire 4-12X40 and the setup is solid, with proper clearance all around. The 1-5/8 inch ejection port fit my Savage perfectly, and the black anodize or powder coat tone down the stainless steel look. I am impressed with this company's range of rails and will consider them in future purchases.

    Recommended

    Needed it to be a bit longer so I could mount the scope further backward towards the shooter.

    4 out of 5
    Location:
    Date: February 3, 2023

    The savage 93r17 scope mount is of good quality and fits the rifle as intended, but the casing ejection notch is positioned in a way that makes it difficult to use with some scopes. I had to flip the rail so that it extends more towards the rear of the rifle to make it work with my ATN scope. This resulted in the ejection notch not aligning with the ejection port on the rifle, but it still functions properly. I searched for a longer rail, but didn't find any options right away. Since it was working fine, I decided to keep it. I'm giving the rail 4 stars due to the correctly aligned screw holes and the absence of burrs or rough machining. The only improvement would have been to make it a half inch longer.

    Recommended

    erfect fit and good product

    5 out of 5
    Location:
    Date: February 3, 2023

    I was initially apprehensive about ordering this item online from a third-party vendor instead of directly from EGW, but my concerns were unfounded. The product arrived in its original packaging and was brand new, eliminating the need for returns. Regarding the product itself, it mounted seamlessly onto my Savage MK II. The construction is robust and of high quality, giving me confidence that it will not fail or deteriorate in the future. Although it is on the pricier side, I have yet to find another picatinny/weaver rail that fits the pre-drilled screw holes on the Savage MK II bolt-action rifle. In conclusion, I would recommend this savage mark ii scope mount to any MK II owner looking to use a scope, especially since there are no other options that cover the 1 5/8" ejection port on the newer MK II models with proper alignment for drilling.

    Recommended

    Quality product, fit perfectly

    5 out of 5
    Location:
    Date: February 3, 2023

    I have a Savage Mark II E receiver and this EGW base (model 41600) fits it perfectly. For those unfamiliar, there are two different Mark II receivers - the older, smaller one often referred to as "Pre-E," and the newer receivers which are the same size as the Mark II and 93R. The center-to-center spacing between the screw holes is .505" for each pair and 3.345" between the innermost two closest to the ejection port. This base will fit any Mark II/93R with that same spacing. Note that the product photo on the listing is misleading and makes the finish appear rough and chalky

    Recommended

    Savage 93 Picatinny rail

    5 out of 5
    Location:
    Date: November 5, 2019

    It was exactly what I needed for my Savage 93. I am standardizing on Picatinny style scope mounts as I move scopes from one rifle to another. Excellent fit and finish.

    Recommended

    EGW Picatinny Rail Scope Mount

    5 out of 5
    Location: Oregon
    Date: August 22, 2016

    Wanted a one piece mount for my Savage 93 17HMR. Could have bought something quite bit cheaper. However, I also try to buy USA. This mount works. Its solid. Its USA. I have no complaints.

    Verified Buyer Recommended
    12 Total Reviews
    • 1


    Related Products



    EGW Mounts

    Scope Mount