Raptor Grip - Mossberg 500/590 Shockwave Grip for 12 & 20-GA
The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your firearm. And its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.
The Raptor Grip is molded of a super-tough glass-filled polymer and fits:
- Mossberg 500 12-gauge firearms (aka 500A)
- Mossberg 500 20-gauge firearms (aka 500C)
- Mossberg 590 and 590A1 firearms (12-gauge)
- Mossberg 510 Mini firearms (12- and 20-gauges)
- Mossberg 835 firearms (12- and 20-gauges)
- Mossberg 535 firearms (12- and 20-gauges)
- Mossberg 600 (New Haven) firearms (12- and 20-gauges)
- Maverick 88 (12- and 20-gauges)
- Coast to Coast model CC 660 Master Mag (12- and 20-gauges)
Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Order yours today. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation.)
Firearm shown is not included, however.
Note that a pistol-grip-only Mossberg/Maverick 12-gauge with a 14″ barrel and the Raptor Grip installed measures 26.5″ in overall length (measured parallel to the bore). The grip itself adds 5.25″ to the length of the weapon (measured parallel to the bore).
Of course, the Raptor Grip also fits 12-gauges and 20-gauges with 18.5″, 20″, and longer barrels.
Note that there is no predefined hole for a sling swivel stud on the Raptor Grip. This allows you to put your sling swivel wherever you want it on the grip–not just where we think it should go. Be sure to drill a 1/8″ pilot hole.
- Mossberg 500 raptor grip
- Mossberg raptor grip
- Mossberg 590 shockwave grip
- Shockwave pistol grip
- Raptor grip shotgun
- Mossberg shockwave pistol grip
- Mossberg 500 parts
- Mossberg 500 pistol grip
- Mossberg 500 Stock
- Mossberg 500 heat shield
- Mossberg 500 scope mount
- Mossberg 500 forend
- Mossberg 500 sling
- mossberg 500 side saddle
The distinction between inferior quality and premium Mossberg 500 Grip is undeniable. At MSP, we only offer Mossberg 500 Accessories from the most trusted brands like Shockwave Technologies. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Super simple install ! Absolutely love the transformation !
Shockwave Raptor Grip
Fit just like it should!
Shockwave Grip for JC Higgins Model 20
I was in a hurry and ordered the wrong grip for my shotgun...but I retro fitted it to make it work. Other than my mistake, the grip is perfect, and comes with the bolt and two bolt-hole covers. Thanks!
Mossberg 500 birdshead grip
Purchased it to convert my Mossberg 500 shotgun into a Shockwave, and it works perfectly. Way less expensive than buying a shockwave. And the answer is YES. It helps to cut down on the recoil and makes the shotgun way more manageable that using a pistol grip.
Mossberg Shockwave Grip
If you have a shotgun for home protection, you need this product. Its perfect!!!
Customer service was beyond my expectations. Once my order was processed their stock for the item was depleted. By email their customer service contacted me about how to proceed with my order. I stated I was in no hurry for the grip and would appreciate them shipping a grip when Mounts Plus stock is replenished. Beyond my expectations, I received my grip in less than a week.
night and day
Felt recoil with my Mossberg 500 is amazing. The contrast is night and day.️ My only regret is that I did not buy the Shockwave Raptor Grip sooner.
Very comfortable to shoot
Shockwave Raptor Grip fits my el-cheapo Maverick 88 perfectly. Fits nice and snug tightens down firm and not much of an overlap where it connects. You can't tell from the image, but the butt of the grip is really kind of ball-shaped which I think helps keep a good grip. It appears well made, and I assume it to last the life of the gun without any difficulties.
I love the Raptor grip
I love this Raptor grip; it shortened my Mossberg 500 significantly, now I can take the corners better in case of any home defense issue.
Rock solid grip, easy installation, great upgrade!
I have been shooting smoothbores with pistol grips for twenty years, starting with my Mossberg Maverick Model 88 when I was a teenager. I currently have a Mossberg 500 AOW that had a traditional pistol grip on it. The recoil was brutal on my shooting hand with that grip, so I wanted to try this different grip shape. I bought this grip and was immediately impressed when I received it. It is very sturdy and looks good on the shotgun. Installation was painless and required no modifications to my gun or the grip. As some other reviewers have noted, there is some overlap of the grip over the receiver (the grip is slightly bigger in all dimension than the receiver). This does not look bad at all, it is quite uniform, and with its nice rounded edge, there is no danger of snags, etc.
Very comfortable to shoot.
Love it — excellent quality and well suited for me. I am comfortable shooting with it, and it decreases recoil significantly over the conventional pistol grip. The texture is a little smooth for my liking. I did find it helpful/necessary to add skateboard tape to the handle in order to obtain a secure purchase of the weapon.
Significantly reduced felt recoil compared to other grips
This grip is excellent for those who want a shorter package when it comes to their 12 gauge but dislike the feeling of more conventional grips. Though as a primer, i will say here that any pistol grip requires both practice and aptitude of proper shooting stance as well as recoil management. I would not recomend this for people who are either recoil shy, or inexperienced with Pistol Grip Only (henceforth acronymed as PGO) shotguns. improper holding (IE, holding your firearm above your chin and/or less than a few inches away) will result in a 30 dollar tooth extraction for any and all who don't heed this warning. Now as to elaborate on my thoughts on the product. I wholeheartedly support this. PGO shotguns are among my favorite firearms to own and use, so i've gotten acquainted with several kinds. Most are fairly harsh when it comes to energy transfer into your wrists. But after taking this to the range it is significantly softer shooting than other grips i own. Even my Hogue tamer which up until trying this product was my gold standard for pistol grips. For anyone who owns a Stevens 320 and wants to use one of these, This will work with modification. Although the 320 is mostly a clone of the Winchester 1300, curiously, it doesn't use the v shaped cut the winchester does. It does however use a very similiar mount as the Remington 870. Though it will require you to be a little handy with either sand paper and a file, or skill with a dremel. (which is what i used) You will also need to use a different mounting bolt than what this stock comes with, as the one provided is of a smaller diameter than what is needed. I used the bolt the original stock came with. A couple nuts to fill some space was needed in my case.