Magpul CTR Commercial Stock for AR-15 - Black
Weapons generally come with their very own buttstock, which frequently lacks in endurance and design. Professionals frequently decide to swap the first AR 15 stock with something powerful and more practical. That is why Magpul has created a wide range of buttstocks that is astonishing for people who understand that gear quality is predominant in almost any process.
The Magpul CTR Commercial variation is such a buttstock, used by people who need something better. It's made specifically for AR15/M16 carbines and enhances pretty much every facet of a stock. You get increased equilibrium because of variety of variables. Primarily, the Magpul CTR has a premium quality friction lock, which reduces wobble from recoil. Second, the 0.55 inch conventional butt pad prevents weapon slipping, particularly when smooth surfaces like armour are present on the shoulder region. The size of the butt pad is perfect for the slanted and longer backs of commercial-spec pipes. Finally, the powerful stuff used to make the CTR Magpul Stock will not get poorer during bad weather scenarios or from environmental risks.
The sleek, a-frame contour prevents any inadvertent activation of the release latch, while also preventing any snagging. There's a sling mount in the back of the stock which can get pushbutton sling swivel, either for left or right handed operators.
Features & Benefits of the Magpul CTR Commercial Stock:
- 3 useful sling mounts: A back underside one for typical 1.25 inch sling loops. A back one for pushbutton sling swivels (ambidextrous. Eventually, a Tone-Lanyard hole for custom paracord rings.
- A 0.55 inch butt pad specially made to fit the broader, slanted backs of commercial spec pipes.
- Compatible with many Magpul receiver-sling accessories, including the Magpul ASAP.
- It mounts on many commercial spec pipes, including those of Bushmaster, DPMS and Olympic.
- Friction lock that minimizes uncertainty and weapon wobbling in general.
- Positive locking is provided by a chrome-silicon lock spring, that'll be practical for a long time.
This is the perfect stock for anybody using commercial spec extension tubes. Otherwise, you still need to get your Magpul CTR commercial spec stock and order a commercial extension tube to fit on it. It is a purchase that can alter the entire profile of its own use and your weapon, giving you above all, solidity and increased precision success.
- Magpul ctr stock commercial
- CTR® carbine stock – commercial-spec
- Magpul CTR carbine stock commercial
- Magpul CTR commercial stock black
- Magpul commercial stock
- commercial stock
- commercial ar stock
- commercial buffer tube stock
- commercial-spec stock
- ar 15 commercial stock
- commercial ar15 stock
Magpul Stocks Quick links:
- Magpul stock
- Magpul ar stock
- magpul stock ar15
- Magpul buttstock
- Magpul AR15 stock
- Magpul MOE rifle stock
- Magpul CTR stock
- Magpul SL stock
- Magpul PRS stock
- Magpul AK47 stock
- Magpul Shotgun stock
AR15 Stock Quick Links
- ar15 stock
- ar 15 stock
- ar stock
- best ar 15 stock
- ar-15 stocks
- carbine stock
- commercial spec stock
- best ar15 stock
- best ar 15 collapsible stock
- best ar stocks
- best stock for ar15
- best ar15 stock kit
- commercial buttstock
- Magpul commercial stock
The distinction between inferior quality and premium AR Stock is undeniable. At MSP, we only offer AR15 Accessories from the most trusted brands like Magpul Stock. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Overall good, still slight movement
Overall I am happy with this ar15 stock. However, when locked in place, there is still a small amount of movement of the stock on the buffer tube. It is significantly better than the factory stock, though, with respect to movement. My rifle is a S&W M&P 15 Sport (milspec buffer tube). I would have given it 5 stars if it were rock solid on the buffer tube.
Have 2 AR15s with the Magpul CTR stocks
Have 2 AR15s with the Magpul CTR stocks and have had no issue's with them. If the commercial version is installed on a mil-spec buffer tube (smaller in diameter), it will rattle; you must know what is installed on the rifle before ordering. Mil-Spec- 1.148", Commercial- 1.168", the threaded end is not the same either.
Awesome ar 15 stock
As noted in some other reviews, this stock is not necessarily a perfect tight fit when received. BUT it can be tweeked. If your stock is a bit loose when first installed, it can be fixed with 5 minutes and essential tools. You need to knock out the pin that holds the friction lock to the stock. Then you will see a U shaped piece of metal held in by another pin. All you need to do is take out the U shaped piece, give it a small squeeze with pliers and reassemble. Obviously, take your time and only squeeze a little at a time. But this will make the stock a better fit to your buffer tube. By the way, mine was a commercial buffer on an LR 308.
Best basic AR stock on the market.
Sturdy, and the locking lever is a great selling point. It's not hard to install, unless you use pliers like people are talking about. Don't do that. Use a standard screwdriver and wedge it between the end of the lever and the T-head of the locking pin, then simply squeeze the lever like you would in normal operation. Slides right on. The screwdriver head acts as a spacer and adds to the effective travel of the lever, thus overextending the travel of the locking pin, which is necessary to start the stock on the buffer tube. Once the pin falls into the rail, remove the screwdriver, and normal operation is identical to the original, with the added bonus of having a locking lever that makes the stock fit snug as if it were a fixed one. Very nice design. No gunsmithing needed.
Best ar15 colapsable butstock
I had an AR15 with a six-position stock that had a lot of wobble in it. I read a review for this Magpul stock and decided to order it. Great purchase. Tight fit, no wobble. Very happy with the purchase.
Magpul CTR Stock.
Bought this stock as an upgrade to the S&W MP15 factory stock—quick install. After adjusting for the desired length, there's a clamp lever that secures it to the buffer tube and prevents the loose feel of the standard stock. It also has built-in Magpul QD holes in the stock; just snap in your QD swivel connectors. Very happy with this purchase.
I did not make a mistake with this purchase!
I could not deal with the wobble built into the factory stock on my m4a1. This replacement is a perfect mil-spec replacement that fits nice and snug. Just follow the easy directions and you will not be disappointed.
Best carbine stock - period!
Best carbine stock, period. When you clamp it up, it doesn't wiggle, wobble, shake, make noise, etc... It fits my DPMS extension like a glove. The buttpad is removable, but if you do, when you collapse it all the way, the slant of the extension sticks out a little. This doesn't concern me, though, because you can't shoot it with the stock all the way in very comfortably. The clamp is disengaged when you pull on the adjustment lock, and you can use it without the clamp engaged. Only detractors are maybe a little pricy, and you cannot export the stock, but in what other countries are they going to let you in with your "assault rifle"? Very well made as usual from MagPul.
rugged and durable AR stock
This is a rugged and durable AR stock. It installs quickly and looks good. Although expensive, you certainly get a lot of value for the money. The stock adjusts easily and locks into position. It doesn't rattle or fail to stay extended like many of the cheaper collapsible stocks do. I would recommend this and buy another if I assemble another AR rifle. Very high quality.
Honestly, this is the best ar stock
Honestly, this is the best stock ever! I have an S&W m&p 15 sport 5.56, and this thing fits like a glove! The friction lock leaves the stock with absolutely no wobble! It's much more comfortable than the factory stock too. I would recommend this to anyone who's looking to buy one! You won't be disappointed!
Good Buying Experience!
Good Buying Experience!!!