EGW EGW Tikka T3 Scope BaseMachined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.245"
Overall Length: 7.458"
EGW Tikka T3 mount is made specific to the gun, and will also work with Tikka T3 Lite and T3 X Rifles. The T3X rifle has an extra hole in the receiver that our rail covers up and does not use.
This Evolution Gun Works - EGW mounts is available with a 0 or 20 MOA.
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
EGW Tikka T3 mount is provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled at tapped for 6-48 screws. Your gun may require metric screws. If you require metric screws, please select that option. We are happy to provide whichever size screws you need.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This Evolution Gun Works - EGW mounts is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!
We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
EGW Product #
- #44000 - Tikka T3 Picatinny Rail Scope Mount 0 MOA Ambidextrous
- #44001 - Tikka T3 Picatinny Rail Scope Mount 0 MOA Silver Ambidextrous
- #44002 - Tikka T3 Picatinny Rail Scope Mount 20 MOA Black Ambidextrous
- #44003 - Tikka T3 Picatinny Rail Scope Mount 20 MOA Silver Ambidextrous
Customer Ratings & Reviews
tikka t3 scope base
Ordered this for my tikka t3x. The fit and finish were excellent. Can't wait to get it in the range.
Best Tikka T3 mounts
Excellent value rail that fits my Tikka T3 perfectly. It seems to be holding up well to the recoil of my 300 WSM.
Clean out the receiver screw holes on the Tikka.
When I first got my EGW Tikka T3 Mount, I had a difficulty pushing the screws into the receiver. I called EGW and verified to me that Tikka fills the screw holes in the receiver with a corrosion inhibitor and therefore the issue of not being able to set the screws in the receiver. I was informed that a robust cleaning of the screw holes and perhaps using a 6x48 tap to clear the muck out would take care of the dilemma, and in fact, it did. Other than that, no problems. This is the first time I have ever struggled such an issue when mounting a Picatinny rail and I hope the last time.