EGW Sight Mount For the Docter, Burris Fastfire, Vortex Venom, and Vortex Viper for GI 1911
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Dovetail Width: .347"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
This Evolution Gun Works (EGW) mount fits:
1911s with a G.I. style rear sight cut
Iver Johnson 1911A1
Iver Johnson 1911A1 9
Iver Johnson Falcon 45
Iver Johnson Thrasher 45
Iver Johnson Thrasher 9
Iver Johnson 1911A1 Chrome 38W
Iver Johnson 1911A1 Chrome 38P
Iver Johnson 1911A1 CHRW45
Iver Johnson 1911A1 CHR45P
Iver Johnson 1911A1 CHR45WP
Iver Johnson 1911A1 Zombie
Iver Johnson 1911A1 Copperhead
Iver Johnson 1911A1 Water Moccasin
Iver Johnson 1911A1 Boa
Iver Johnson 1911A1 Muddy Girl 9mm
Iver Johnson 1911A1 Digital Navy
Iver Johnson 1911A1 Digital Snow 45acp
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Vortex Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Customer Ratings & Reviews
Be the first to rate this item!Write Review