EGW Red Dot Mount for the Docter, Burris Fastfire, Vortex Venom, and Vortex Viper for FN FNX, FNS
Mounting Hardware is Included
This mount fits:
- FN FNS
- FN FNX
This mount does not fit:
- FN FNP (the slide radius is too large to allow this mount to fit)
- FN 5.7
- Any Optics Ready Pistol
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-48 Torx Head Screw
Red Dot Fitment:
- Vortex Viper
- Vortex Venom
- Burris FastFire
- ADE RD3-001
- ADE RD3-002
- ADE RD3-009
- UTG Reflex Micro Dot
- Crimson Trace CTS-1200
- Crimson Trace CTS-1300
- Sightmark Mini Shot
This Evolution Gun Works - EGW mounts does not fit the FN Five-seveN (5.7)
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
- FNX 9 red dot mount
- FNS 40 red dot mount
- FNX 45 red dot mount
- FNS 9 optic mount
Vortex Venom Quick Links:
- Vortex Venom
- Vortex Venom for sale
- Vortex Venom glock mount
- Vortex Venom on ar15
- Vortex Venom picatinny mount
- Vortex red dot
- Venom red dot
- Vortex Venom on shotgun
- Vortex Venom red dot for sale
- Vortex Venom red dot
- Vortex Venom ar mount
- Vortex Venom offset mount
The distinction between inferior quality and premium Vortex Viper Mount undeniable. At MSP, we only offer Red Dot Mounts from the most trusted brands like Vortex Optics. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
FN Dovetail Mount
The plate is thicker than it could be which makes the point of aim higher than the front sights, even with suppressor sights it's still going to be high. The recoil posts do not line up with all holes due to the black coating on the mount. Not a terrible product but for an extra $40 you can have your slide milled and do it the right way.
Works very well for fns 9c not set up for red dot sights. My fns 9c red dot mount slide was not set up for a red dot sight. This allowed me to add a Vortex Venom.
fn five seven red dot mount
My Vortex Venom now has a home on my fn five seven
FNS 9 red dot mount
I bought this to mount my Vortex Venom on my FNS-9. It fits like a glove and does everything I hoped for.
Cheaper from here then direct. Plate is just bit wider then the slide of my FNS-9.