EGW Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA
This mount fits:
- Savage Model 110 Long Action Round Rear Receiver
- Savage Model 111 Long Action Round Rear Receiver
- Savage Model 112 Long Action Round Rear Receiver
- Savage Model 114 Long Action Round Rear Receiver
- Savage Model 116 Long Action Round Rear Receiver
- Stevens Model 200 Long Action Round Rear Receiver
This mount does not fit:
- Savage Edge
- Savage Axis
- Savage Axis II
- Savage Model 25
- Savage Long Actions with Flat Rear Receivers
- Savage Medium Actions with Flat Rear Receivers
- Savage Long Actions Drilled for #8 Screws
This mount does NOT fit the 212 The 212 mount.
Please check your mounting screw diameter and hole spacing before placing your order to ensure you select the correct mount. Screw diameter and hole spacing information can be found in the description tab below.
Rail Type: One Piece Picatinny
Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Anodizing
Center Spread: 4.630"
Overall Length: 7.458"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Compatible with Picatinny Scope Rings or Weaver scope rings.
Evolution Gun Works Savage bases will work with any long action round back Savage rifle with an ejection port. It is alsocompatible with the Stevens Long actions.
The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.
Savages without an accu-trigger will require our flat back mount (listed separately).
This mount comes standard with a bevel on both sides making it ambidextrous.
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
The distinction between inferior quality and premium Savage 110 scope base is undeniable. At MSP, we only offer Scope Bases from the most trusted brands like EGW Mounts. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Be the first to rate this item!Write Review