EGW Savage Flat Back Short Action Picatinny Scope Mount - Pre 2003
Mounting Hardware is Included
This mount fits:
Savage Model 110 Short Action Flat Rear Receiver - Pre 2003
Savage Model 111 Short Action Flat Rear Receiver - Pre 2003
Savage Model 112 Short Action Flat Rear Receiver - Pre 2003
Savage Model 114 Short Action Flat Rear Receiver - Pre 2003
Savage Model 116 Short Action Flat Rear Receiver - Pre 2003
Savage Striker (Please confirm your hole spacing)
This mount does not fit:
Any Savage Short Actions with Round Rear Receivers
Please check your mounting screw diameter and hole spacing before placing your order to ensure you select the correct mount. Screw diameter and hole spacing information can be found in the description tab below.
Rail Type: One Piece PicatinnyMachined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Anodizing
Center Spread: 3.93"
Overall Length: 6.670"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Ambidextrous: Yes
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Compatible with Picatinny Scope Rings or Weaver scope rings.
This mount comes standard with a bevel on both sides making it ambidextrous.
Evolution Gun Works recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
EGW Product #
- #41200 - Savage Flat Back Short Action Picatinny Scope Mount 0 MOA Ambidextrous
- #41202 - Savage Flat Back Short Action Picatinny Scope Mount 20 MOA Ambidextrous
Mounts Plus offers an extensive selection of Savage 110 Scope Bases and Picatinny Rails, catering to both short and long action rifles. These precision-engineered mounts enhance accuracy and adaptability, featuring robust construction from high-grade materials for durability and reliability. Whether for hunting, competitive shooting, or tactical use, they provide a stable and secure platform for various optics and accessories. The Savage 110 Scope Bases are designed for specific model compatibilities, ensuring a perfect fit and optimal performance. The Picatinny Rails, available for both long and short action round back receivers, offer flexibility with full-length cross slots for mounting scope rings and other accessories, embodying Mounts Plus's commitment to quality and precision for shooters demanding the best in firearm accessories
Choose from a wide variety of Scope Rings
- 35mm scope rings
- weaver scope rings
- arms scope rings
- picatinny scope rings
- quick detach scope rings
- quick release scope rings
- qd scope rings
- extra high scope rings
- extra high scope rings picatinny
- barrett scope rings
- nightforce xtreme duty rings
- egw scope rings
Alt Description:
- Savage 110 picatinny rail
- savage 110 scope base
- savage 110 scope mount
- scope mounts for savage 110
- savage 110 scope rail
- savage model 110 scope mounts
- savage 110 short action scope base
- savage 110 flat rear receiver base
- savage 110 flat back scope mount
- savage 110 scope base flat rear
- savage 110 flat back picatinny rail
- savage flat back scope mount
- Savage 111 Short Action picatinny rail
- Savage 112 Short Action picatinny rail
- Savage 114 Short Action picatinny rail
- Savage 116 Short Action picatinny rail
- Savage 111 Short Action Scope Base
- Savage 112 Short Action Scope Base
- Savage 114 Short Action Scope Base
- Savage 116 Short Action Scope Base
- Savage 111 Short Action Scope Mount
- Savage 112 Short Action Scope Mount
- Savage 114 Short Action Scope Mount
- Savage 116 Short Action Scope Mount
Savage 110 Quick Links
- savage 110 trigger
- savage 110 precision accessories
- savage 110 elite precision accessories
- savage 110 accessories
- savage 110 trigger upgrade
- savage 110 upgrades
Choose from a wide variety of Scope Rings
- 35mm scope rings
- nightforce rings
- nightforce scope rings
- weaver scope rings
- arms scope rings
- picatinny scope rings
- quick detach scope rings
- quick release scope rings
- qd scope rings
- extra high scope rings
- extra high scope rings picatinny
- barrett scope rings
- nightforce xtreme duty rings
- egw scope rings
The distinction between inferior quality and premium Savage 110 scope base is undeniable. At MSP, we only offer Savage 110 Accessories from the most trusted brands like EGW Mounts. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
- 1
Mounting the rail was very easy and I torqued it down
I installed an EGW rail on my youth model Savage 7mm08 after struggling to get the gun to shoot consistently. Despite trying different scopes, rings, and ammo, I couldn't achieve consistent accuracy. One day, I tried using Burris Zee Rings and discovered that the back mount on the action was out of spec, causing the rings to be loose. I ordered the EGW rail and a Vortex 2-8 Diamondback HP scope and found that mounting the rail was simple. The gun is now shooting around 1 MOA and I have regained confidence in it. The EGW rail also gave me more flexibility in scope mounting and I plan to install it on all my bolt action guns. The issue with the original gun was the out of spec rail, and the new rail has fixed the problem.
Its built very well.
This savage 110 flat rear receiver base is well-constructed, but I had to return it because it was not compatible with my rifle. I had to go directly to EGW's website to find the proper one, as Amazon did not display it. Despite this inconvenience, EGW provides quality products."
Savage Flat Back Scope Mount
Fit older Savage 11 and did everything right so far.
I can always rely on a EGW Scope Mount Base
Fits on an older Savage 11 and did everything right so far. Rock Solid mount. EGW for making great scope mount and MSP is the place to buy them, Fast shipping.
- 1