EGW Browning A-Bolt Picatinny Rail - Long Action
Mounting Hardware is Included
This mount fits:
- Browning A-Bolt Long Action
Please check your screw diameter. Regular Browning A-Bolts come with #6 screws. Browning AB3s come with #8 screws. This product is designed for the standard A-Bolt, and A-Bolt 2 not the AB3. We do offer a mount for the AB3. The part number for that is 43400 for a 0 MOA and 43402 for a 20 MOA.
**We do not currently offer a Browning A-Bolt that will work for the Mountain Titanium in .300WSM.
Rail Type: One Piece Picatinny
Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Anodizing
Center Spread: 3.86"
Overall Length: 7.064"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Compatible with Picatinny Scope Rings or Weaver scope rings.
This mount comes standard with a bevel on both sides making it ambidextrous.
Evolution Gun Works recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
- browning a bolt picatinny rail
- bolt action picatinny rail
- bolt on picatinny rail
- picatinny rail for browning a bolt
- picatinny rail for bolt action rifle
- picatinny rail browning a bolt
- best scope mounts for browning a bolt
- best picatinny rail for bolt action rifle
- browning picatinny rail
EGW Quick Links
- egw guns
- egw scope base
- egw red dot mount
- egw mounts
- egw gun parts
- egw bases
- egw dovetail mount
- egw sight mount
- egw scope mounts
- egw scope bases
- egw precision parts
- egw mount
- egw picatinny rail
- egw mounting plate
- egw scope mount
- egw optic mount
Choose from a wide variety of Scope Rings
- scope rings
- tactical scope rings
- 1 inch scope rings
- 30mm scope rings
- 34mm scope rings
- 35mm scope rings
- nightforce rings
- nightforce scope rings
- weaver scope rings
- arms scope rings
- picatinny scope rings
- quick detach scope rings
- quick release scope rings
- qd scope rings
- extra high scope rings
- extra high scope rings picatinny
- barrett scope rings
- vortex scope rings
- nightforce xtreme duty rings
- egw scope rings
The distinction between inferior quality and premium Browning A-Bolt Picatinny Rail is undeniable. At MSP, we only offer Browning accessories from the most trusted brands like EGW Mounts. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Browning a-bolt Picatinny rail scope mount
This was purchased to give a more excellent range of scope mounting options for a Browning A-Bolt 30-06 rifle. Specifically, to be able to move the scope back farther. The rail did just that. It allowed the scope to be mounted back another couple inches (not that much was needed on my setup, but the option was there). The mount seems very solid and well built. The screw holes lined up perfectly with the factory taps on the receiver. One slight adjustment we did make: Once we had the scope back far enough, the front of the rail mount was in contact with the scope. I don't fault the mount for this, as it is unavoidable. The situation was quickly corrected by grinding down part of the front of the mount that was contacting the scope. A metal file would also work; it just takes longer. Higher rings would also fix the problem, although grinding off part of the mount is usually better since its not a good idea to use more top rings than needed (as I recently witnessed repeatedly at a recent rifle sight-in clinic).
Picatinny rail for Browning A bolt
This rail give just enough tip to the scope for having elevation scope caps made for long-range shooting of my Browning A-bolt 270 win. If you use scope rings that are medium or high rings this rail will help to replace the up and down elevation you lose by having a higher then standard rings.
Browning A bolt Picatinny rail
Looks good on the gun. Fits the A-bolt perfectly. With this mount, I was able to move the scope back closer to me, which allowed a more comfortable shot. I recommend this mount if you are having trouble with the scope being too far.
Browning A-bolt Picatinny rail scope mount
Fits the A-bolt perfectly and looks good with this mount, I was able to move the scope back closer to me, which allowed a more comfortable shot. I suggest this mount if you are looking for more eye relief.
Fits as expected
Looks good on My Browning, fits the A-bolt perfectly. With this mount, I was able to move the scope back closer to me, which allowed a more comfortable shot. I suggest this mount if you are having trouble with the scope being too far.