My Cart: 0 item(s)
CDM Gear MTRS - Flashlight Mount for Mossberg 590 20ga Shockwave
The MTRS20 with included 3 slot rail is the latest offering in the MT series of clamps for lights with built in attachment points. This 1.7oz clamp fits in the small space of the Mossberg 20 gauge 590 SHOCKWAVE. This mount can be positioned 2 ways, left, or right, and provides a solid "lock up" around the mag tube. This mount can be positioned 2 ways, left, or right, and provides a solid "lock up" around the mag tube. Each position allows for a sling to be used on one side or the bottom. . Manufacturered from aircraft grade aluminum and hard coat anodized it is a superior mounting solution for those with limited space or under the gun sling mounting requirements. One tool for one bolt is all that is needed to attach and remove the clamp or light in seconds.
FITS: 20 GAUGE Mossberg 590 SHOCKWAVE. Not for use with heat shield without modification in some cases.Will not fit Nordic Components magazine tube.
Features and Benefits of the CDM Gear Mossberg Shockwave Flashlight Mount:
- Holds a rail mountable tactical light.
- Undermount sling slot doubles as hand stop
- Mount stays on when barrel is removed.
Quick Links:
- mossberg shockwave accessories
- mossberg 590 shockwave accessories
- mossberg shockwave pistol grip
- shockwave accessories
- best mossberg shockwave accessories
- mossberg shockwave upgrades
- 590 shockwave accessories
- mossberg shockwave grip
- shockwave shotgun accessories
- mossberg shockwave rail
- black aces tactical shockwave accessories
- Mossberg 500 Accessories
- Mossberg 500 parts
- Mossberg 500 pistol grip
- Mossberg 500 Stock
- Mossberg 500 heat shield
- Mossberg 500 scope mount
The distinction between inferior quality and premium shotgun flashlight mount is undeniable. At MSP, we only offer Shotgun Accessories from the most trusted brands like CDM Gear. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(10)
4
(2)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(10)
4
(2)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
12 Total Reviews
- 1
Shockwave sling mount
Jim
Location: MD
Date:
November 7, 2024
Sling mount fits nice no complaints.
Verified Buyer
Recommended
Shockwave sling mount
Jim
Location: MD
Date:
November 7, 2024
Sling mount fits nice no complaints.
Verified Buyer
Recommended
Solid mount and easy to install.
ItsLegal
Location: Colorado
Date:
March 20, 2023
Much more secure than other rail mount options. I'm not worried about bumping this and knocking it off aim with a light mounted. The strap mounts provide some protection to the barrel and shell tube as well. Easier to install than it looks too. Only took me a few minutes.
Recommended
Shockwave 20 ga. picatinny mount and bracket
Ktown
Location: Texas
Date:
January 6, 2021
Easy to put on ,all the wrenches and screws included
Verified Buyer
Recommended
fits my SDS Imports Civet 12 perfectly
jay
Location: Missouri
Date:
October 29, 2020
fits my SDS Imports Civet 12 perfectly
Verified Buyer
Recommended
Worth the wait.
Lil Brandon
Location: Georgia
Date:
May 17, 2020
I have had my eyes on this mount the few months that this gun hit the shelves and now I’m waiting on my polytac and GG&G mount to seal the deal. This mount is solid and I red loctited it just to be sure. When I want quality I WILL be back and no I’m not terminator lol. Just a guy who appreciates people who appreciate quality.
Recommended
Mossberg 20ga shockwave flashlight mount
NKTP
Location:
Date:
December 4, 2019
Works as advertised for the 20 gauge Shockwave. Easy to install - there is a video online if needed.
Recommended
Very nice
Romero
Location: Albuquerque NM
Date:
November 5, 2019
Fits very nice ready to mount a light works great haven’t took any shots with it on but I’m very confident with this mount and I don’t see having any issues I can’t wait to see how it holds up I would buy it again that’s for sure and if you want to mount a light or whatever this is the best product to mount you lights it’s a firm fit they also shipped this item very quickly to me hassle free
Verified Buyer
Recommended
Light mount for the
Rod
Location: Thebes, Illinois
Date:
September 10, 2019
It's a well made mount and is lightweight.
Verified Buyer
Recommended
want more
John Wesley
Location:
Date:
July 12, 2019
Simple to install. Excellent for mounting a flashlight /laser. I want one for all my defense shotguns.
Recommended
Fits Mossberg 500 20 gauge standard
David E.
Location: New York
Date:
March 5, 2019
Even if you have a Mossberg 20 gauge standard shotgun, not the Shockwave, it will fit perfectly.
Verified Buyer
Recommended
Shockwave 20ga Light Mount
ressor130
Location: MERICA!
Date:
February 1, 2019
Simple to install (read directions 1st) seems sold and i ran about 30 ads of high brass slugs and buckshot through it. Only thing i notices was magazine cap came loose from running the gun but that has nothing to do with the light mount and is probably a detent issue from Mossberg. time will tell but it works great with my Enforce Gen 1 weapon light.
Verified Buyer
Recommended
12 Total Reviews
- 1