ATI Elite Strikeforce AK-47 package
Fits: Most stamped AK receivers, will not fit milled receivers.
The ATI Elite Strikeforce ak-47 package comes with the AK-47 grip, forend stock and a six-position flexible non-folding stock. This tactical AK stock can be shot from the folding stock position. Ati stock traklock system removes the horizontal and vertical movement of the stock on the buffer tube and ensures smooth, stable storage changes and removes the need for secondary locking mechanisms. There are no Snag Points.
A Thin Scorpion Recoil Pad, Dual Sided QD Sling Attachment Point. Reduces the difficulty of reacquiring the target by minimizing the muzzle lift. Pad Remains Stable at High Temperatures Eliminates Spring and Piston Style Recoil Suppression Systems Limitations.
*Will not fit the M-70 which has a stamped receiver, but utilizes an alternate system for attaching the stock.
Features and Benefits of the ATI Elite Strikeforce AK-47 package:
- Adjustable M4 Style 6-Position Mil-Spec Stock
- Mil-Spec Diameter for Maximum Fit Onto Mil-Spec Buffer Tubes
- Positive Locking System
- Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
- Provides Smooth Secure Stock Adjustments
- Eliminates the Need for Secondary Locking Mechanisms
- Weighs Only 5.85 Ounces
- No Snag Points
- Non-Slip Recoil Pad
- Dual-Sided QD Attachment Point
- Slot for Tactical Sling Attachment
- Receiver Mount & All Mounting Hardware Included
- Ventilated Upper and Lower Handguards
- Ergonomic Design
- Non-Slip textured
- One 4" Picatinny Rail
- Two 2" Picatinny Rails
- One 2" Picatinny Rails with Swivel Stud
- Rails are Removable and Interchangeable
- Blank Inserts for When Rails are Not In Use
- Scorpion Recoil Pistol Grip
- Non-Slip Texture
- Recoil Impact is Absorbed
- Eliminates the Felt Punch of the Recoil
- Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
- Not Affected by Chemicals, Load Size or Extreme Temperatures
- Includes Steel T-Nut and Bolt
- Removeable/Adjustable Tactical Cheekrest
- Elongated Design to Fit All Users
- Includes Cheekrest with ½” of Vertical Adjustment
- DuPont® Extreme Reinforced Polymer
- Limited Lifetime Warranty
- Manufactured in the USA
SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local FFL or the ATF for this and other compliance issues.
Other Rifle Stock Quick Links
AK Quick Links:
- ak accessories
- AK stock
- ak scope mount
- ak light mount
- ak flashlight mount
- ak47 light mount
- AK handguard
- Magpul ak handguard
- AK sling
- AK grip
- AK 47 furniture
The distinction between inferior quality and premium AK Stock is undeniable. At MSP, we only offer AK accessories from the most trusted brands like ATI Stock. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Verry little modifications to lower hand guard for it to fit my vska upper hand guard is a little loose it is very comfortable
There was a supply issue with my order but customer service was on point!!! I received a call from a young lady and she politely told me that my order was delayed due to product availability. I understood and waited.... finally received the kit and it looks great!! The front hand guard needed some fitting but wasn't a big deal and after drilling the stock adapter it was all good. I would highly recommend this kit if you want to dress up your old tired AK. Thank you MSP!!!
The set was delayed due to back order but customer service stayed in contact with me letting me know when to roughly expect and giving updates as necessary. As expected it took a small amount of sanding and buffing to fit perfectly but it ended up going together very smooth. Very satisfied with how it turned out.
Took some work
The ATI AK Stock kit turned out super clean but took some work. The back butt required some grinding, and the forehand was molded a little full. I had to heat it with a torch to get it to fit. The piece looked like it was allowed to cool out of the injection machine a little too soon. Can't beat the price.
Nice, Fit WASR 10-63 Perfectly
The ati ak-47 strikeforce elite stock fits perfectly on my Wasr 10-63. I've owned the gun with the original furniture for 16 years. The end product looks great. My gun did fight me quite a bit, with both the foregrip release levers being extremely difficult to release. However, besides the gun itself being stubborn, the parts went on great, and I didn’t have to trim anything like I’ve seen others state. So the reason for a 4 star? Well, that comes down to specifically 2 things. One the stock adjustment lever is pretty flimsy, it works fine, but I don’t trust that against some extreme use, it would not break. Then again, I’ll likely never have the gun in that extreme of a situation. 2nd, also on the stock, where the stock meets the gun, when gripping the handle, there’s a line where the plastic was molded, and it has sharp edges and is not comfortable obviously when it’s cutting into your hand. Light sand and the problem was resolved, but something worth noting. Some of the plastic feels somewhat cheap, but overall it’s a lovely kit for the price, and fitment was excellent.
ak47 Elite Package review
The ATI elite strikeforce ak-47 package arrived on time. I like how the fitting on the stock is oversized and used a Dremel to get it to a press-fit with no wiggle. I had planned to buy a Hogue grip, but after fitting and feeling your's, I think I will stay with the ATI grip. I like the feel of the grip and the padding. After getting everything on, it was easy to set the trigger pull length and cheek rest for quick, perfect alignment with my scope for me every time. The foregrip also fits tightly and doesn't wiggle and has a better grip than the wood foregrips. I don't plan on using the Picatinny rails to mount things, so I liked the plugs on the grip. My only gripes(3) are that the foregrip is plastic and it raps around the hottest part of the gun(the gas tube) I think I may go back to wood foregrips and add grooves or checkering for grip and stain them black to match. (2) When I shake the gun, the only thing that rattles is the collapsible AK stock. I will look into tightening it up. (1) the Picatinny rails are plastic. But since I'm not using them, I don't care. I do think I may consider putting a bi-pod on the bottom Picatinny rail since I shoot from a bench sometimes. Overall I'm not disappointed for the price. Something else I would like to point out for others is that If you have the top Picatinny rail on you can still use the iron sight as long as nothing is mounted on it,
this ATI Elite strikeforce ak-47 package looks soooooo sick.
Well, first off, this ati elite strikeforce ak-47 package looks soooooo sick. It was not hard to put it on I was missed a few screws for the Picatinny rails and the razorback but pad. I emailed them, and they were so amazing they sent me the stuff I was missing, and I got it like in 3 days. Now it's all done and together but still haven't had the time to shoot it. I'll do not Read more about review stating Well first off this shit her review when I do.
ATI AK-47 strikeforce elite stock
This furniture kit is excellent. Changes up the shoulder weld to my Century RAS-47. There is a small amount of fitting necessary mounting the AK stock mounting block into the gun receiver, and you do have to drill & tap your stock screw hole, but they send the bit and the tap with the kit. I used a hand drill instead of a drill press and was careful to keep the drill level to the block. The stock mounting block was pretty tight going into the receiver, but I elected to use a dead blow hammer for seating it instead of filing the block as the tight tolerance prevents any unwanted slack. Overall, I think its the best form and fit kit on the market.
Very happy with this AK stock
Very happy with the Elite AK stock and furniture. Looks great, works great, and fit great! I was thrilled with the ATI's folding Tac Lite stock set up on my Rugar 10/22, and this AK furniture set has the very same feel to it. I merged it with the ATI buttstock pad, and it works great, remarkably soaks up the recoil! All in all, I love this furniture kit and would highly recommend it. MSP has exceptional customer service, quick delivery, well packaged, and easy directions. 5 Stars!
This furniture kit is great.
This furniture kit is excellent. Changes up the shoulder weld to my Century RAS-47. There is a little amount of fitting necessary mounting the stock mounting block into the gun receiver, and you do have to drill & tap your stock screw hole, but they send the bit and the tap with the kit. I used a hand drill instead of a drill press and w As careful to keep the drill level to the block. The stock mounting block was pretty tight going into the receiver, but I elected to use a dead blow hammer for seating it instead of filing the block as the tight tolerance prevents any unwanted slack. Overall, I think its the best form and fit kit on the market.
The fit and finish was outstanding