AccuShot BT12-QK PRM (Precision Rail Monopod) Standard with Quick Knob Option
The patented Precision Rail monopod (PRM) was inspired by the Magpul Precision Rifle Stock (PRS) and has several other uses where a Picatinny rail is discovered, including as a folding vertical foregrip. The PRM is our second departure from our initial monopod, the first being the ASAI, which we borrowed the machinists from to give a system that is proven for the PRM including retraction feature and the push button deployment. Important parts are built from T6061 Aluminum with a hard anodize finish, internal parts produced from alloy steels, heat treated for long lasting strength and endurance to Rockwell 52. All PRM's come with a Thumbnut which enables the operator to "jam" the knob removing all the endurance discovered between the Male/Female clothing for an incredibly stable shooting stage. The leg retracts out of the way and folds up when not wanted. Black. Made in america. Approximate raising range of 3.5 - 4.75". Consider updating together with the new Quick Knob (QK01) for quicker target acquisition.
These monopods are produced in small amounts on a regular basis and are being delivered. They're accessible on first. Your credit card will probably be billed immediately in the event you place an order and we'll send your ASAI asap. Please e-mail us with your requests and you'll be notified, in the event you would like to be notified when units are accessible. The ones that prepay will get preference over those on the "to be notified" list.
Features and Benefits of the AccuShot BT12-QK Precision Monopod:
- Elevation Range: 3.75 – 4.65”
- Folded Length: 3.85" approximate
- Weight: 7.4 ounces
Quick Knob-Standard Alternative
The brand new Standard Quick Knob (QK01) enables rapid gross adjustments into the goal using a button. The QK01 has a spring loaded button that when depressed enables the operator to slide the knob down or up on the Actuator Stick rapidly into the sight image that is desirable. When the button is released, the fine clothing are reengaged by rotating the QK01 knob and the operator can make the last adjustments. The QK01 works with the Thumbnut to remove any allowance for increased firmness. The conventional knob is replaced by the new QK01 on BT04 BT01, BT08 and BT12 supplying the same approximate range of altitude. Machined from T6061 Aluminum with steel threads and a hard anodize finish for toughness and durability the QK01 is an upgrade that is valued. When bought with the aforementioned known Accu-Shot monopods the QK01 is going to be delivered installed.
The distinction between inferior quality and premium Rifle Monopod is undeniable. At MSP, we only offer Bipods from the most trusted brands like AccuShot Monopod. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Great tool to have at your disposal. Top notch quality!
Great tool to have at your disposal. Top notch quality!
Accu-shot Monopod BT12-qk
The Accu-shot bt12-Qk Picatinny rail monopod is a fantastic product. It is very sturdy, very well built, and functions like a dream. For any precision shooter who shoots a lot from prone, it is a must-have. It deploys quickly when you need it and folds away when you don't. It adjusts quickly and can be held in the weak hand when prone to adjust your aim. It also prevents you from having to carry around a rear bag or a sand sock. The only downside is that it is a little heavy, but on a precision rifle, everything is heavy. I have 3 of these and will get more as I get more guns.
Accushot bt12-Qk Picatinny monopod
Works both as a monopod or a grip to pull the buttstock into the shoulder. It requires a rail at the bottom of the buttstock.
Best Picatinny monopod
I have used the Accu-shot monopod bt12-qk on several long-range AR-15 setups. Combined with a bipod on the front, they are a must-have for shooting prairie dogs at 300+ yards. The monopod allows for perfect shots.
Bet Rifle Monopod - Accushot bt12-qk
I have the bt12-qk on my Savage 110 BA .338 Lapua and it is very steady. I'm able to adjust elevation incrementally with my left hand while maintaining my right hand at the trigger. Great for bench or field use.
I thought the Accu-shot bt12-QK was a gimmick....
When The Accu-shot bt12-QK originally came out, I thought it was a gimmick....boy was I wrong. This has helped tremendously in zeroing my optics at the house at 100 yards. I bought two of these after one experience to outfit a few of my rifles and one roving to zero additional optics. The fine-tune adjustments on this Accu-shot monopod are perfect, and the height is excellent for bench shooting and prone. The only downside I have on it is that it is relatively heavy and requires particular stock with a rail to use this Picatinny monopod. But these are minor, especially with ar platforms where you can swap the stocks out to use.
When this first came out, I thought it was a gimmick. Man was I wrong. The AccuShot BT12 Monopod has helped remarkably in zeroing my optics at the house at 100 yards. I bought two of these after one experience to outfit a few of my rifles and one roving to zero additional optics. The fine-tune adjustments are perfect, and the height is great for bench shooting and prone. The only downside I have on it is that it is relatively heavy and requires certain stocks/rails on the stock to use. But these are minor, especially with ar platforms where you can swap the stocks out to use.
Accu-Shot Standard Height Rail Monopod
The Accu-Shot BT12 has a great fit and finish, and seems like it was made for the Magpul PRS stock. The quick push-button height adjustment and then fine-tuning the hight is fantastic. This Monopod is perfect for bench shooting, particularly for zeroing in a scope. Overall very pleased with the performance, and highly recommend because this monopod is so versatile in how you can use it. Besides the standard vertical static position, you can unlock it and hold the monopod in your hand to adjust target height And besides the great functionality...ecstatically it just looks bad ass on my RPR!
Great for a Ruger Precision Rifle
I use the Accu-Shot BT12 monopod on my Ruger Precision Rifle, the elevation adjustments you can make are so accommodating. Its a quality built product, the machined knurling helps to gripe when making adjustments (you can make small increment adjustments and lock it in place). This thing is not a cheap piece of plastic, it may be a little heavy for someone to carry hunting, but for the range it's perfect. Just make sure it is the right height for you.
Amazing quality! Fast shipping!
this allows me to get a good shot group whether i am up for it or not. longer ranges are now easier too.