VISM Extended Length AR handguard - M-LOK
- NEW M-LOK® Handguards for the Carbine Platforms. Handguard extends past the front sight post, giving you more handguard surface area for your hands and shooting accessories.
- Easy Drop-In install, no special gunsmithing involved, fit into Delta Ring and front Handguard Cap. Remove factory handguard, drop in the M-LOK® handguards and use supplied screws to secure M-LOK® handguard in place.
- Solid fit, top rail is at receiver height and extends over Delta ring to the edge of the receiver. Handguard has 7 angle surfaces of M-LOK® slots.
- Black Anodized Aluminum Construction
- This model fits: Carbine Length Gas Systems
- Includes two M-LOK Accessory® to Picatinny Rail Sections. One Short (1½ M-LOK® slots/ 5 slot Picatinny) and one Medium Length (2½ M-LOK® slots/ 9 slot Picatinny) Picatinny Rail sections. They can be placed in any of the 7 angled M-LOK® surfaces.
- Designed to fit Carbines with: MIL-SPEC Barrel Nut, Delta Ring, and front Handguard Cap.
- Length: 13.5"
- Weight: 10.3 oz. / 13.0 oz. with both accessory rails attached
- US PATENT PENDING
- vism ar15 m-lok carbine handguard vmarmlce
- vism 13.5 extended handguard
- vism 13.5 m-lok handguard
- vism 13.5 drop in handguard
- vism m-lok handguard for ar-15/m4
- vism 13.5in ar15 extended handguard
- vism extended handguard
- extended carbine handguard
- m lok extended rail
- drop in extended carbine handguard
- ncstar - ar15 m-lok handguard, carbine extended, black\
- vism ar 15 handguard
- vism quad rail
- carbine extended handguard
- vism 13.5 rail
- vism drop in handguard
- vism m-lok handguard
- vism ar15 handguard
- ar 15 extended carbine handguard
- ar15 extended handguard
- m-lok® handguard - carbine extended
- ar 15 carbine extended handguard
- extended handguard ar
- ncstar ar 13.5" extended carbine m-lok handguard
- ar 15 extended handguard
- drop-in extended carbine handguard
- extended carbine rail
- 13.5 drop in handguard
- extended drop in handguard
- ar 15 handguard
- ar15 Rail
- carbine length handguard
- drop in handguard
- VISM handguard
- Drop in Mlok handguard
- ar15 drop in handguard
- m lok drop in handguard
- Drop in Carbine Handguard
- M lok handguard
- M-lok handguard
- Mlok handguard
The distinction between inferior quality and premium AR Handguard is undeniable. At MSP, we only offer AR-15 Accessories from the most trusted brands like. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Installed on M&P15 Sport II Optics-ready
I wasn’t sure what to expect. Even from reading all the positive reviews, I was still a little skeptical as nobody had ever really mentioned an install on my specific firearm. There were a few Q&As that said it. But none with a definitive “yes, it’ll look great.” So, as for my review... I just got it yesterday, on time. I installed it as soon as I got it. And I must say, it looks great. It completely changes the look of the gun. It fits perfectly. Adds a lot more grip area and accessory area. Really simple to install. The only drawback, which is not necessarily the fault of the handguard, is that there is a gap between the front of my gas block(which has a rail section due to it being the optic ready model) and the front rail section of the handguard. Since this was kind of designed to go around an A2 sight post, which is about 1” longer than the railed gas block, it makes sense. I’ll probably find something to cover it up. It’s not horrible. I’m still happy with the way it looks overall. The material looks sturdy. The finish is awesome. I forgot to bring home some thread locker from work. But it’s simple enough to pull the fasteners back out and add some later.
Not too sure
All these reviews were made on the same date kinda seems fishy but I might order and in the future I was give an honest opinion
Totally worth it
Cost effective, solid after install, fits milspec without any modification, 5 minute install time.
vism 13.5 extended handguard
So I bought this for my patrol rifle I am constantly testing different modifications for my rifles to find what I like best. But I also like having my front A2 sight which can cause issues with different handguards. So I saw this while looking around the website and figured I’d give it a shot, and man, I really like it. It’s not too heavy for me I can still move my rifle around and transition from target to target pretty quick. I like how I can extend my support hand out much farther and still keep my front A2 sight. I haven’t shot a whole lot out of it, maybe 2-300 rounds, but so far, so good. I am a little worried that if I drop my rifle or fall on it that It may break. But the chances of that happening are unknown. I will rough it up a little bit and put it to the test. And give an update. But as of right now, I recommend it especially for home defense because you have a ton of options to put lights, lasers, grips, and even bipods on it, whatever pleases you.
looks great and fits great
I would recommend this product. Dramatically changed the look of the wife's firearm. Got rid of the useless factory foregrip and added options to attach accessories. Perfect option as hers still has the a post-front sight.
M&P 15 Sport 2 Iron sights
This handguard fits perfectly around my m&p15 sport 2 with the front iron sight. This handguard was easy to install and felt so comfortable. This handguard allowed for plenty of areas to install grips and grip covers. Love this handguard
Amazing add on
I looked long and hard for a rail that would fit the DPMS. I read one other review here that it dropped in and fit the orical. Boy, did it. The fit is perfect. I was concerned about the front sight knockout but the rail piece from the rifle fits it as it was made for it. Again, beautiful design and is installed flawlessly.
VISM M-Lok Hand Gaurd Carbine Length Extended
This product is exactly what I was looking for! It fits perfectly on my M&P 15 Sport II. The functionality, quality, and look of this hand guard are great. Super lightweight as well, installed in about 7 minutes. Simple upgrade with tremendous results!
Fit perfect on DPMS Oracle
You don't have to spend hundreds of dollars on a quad rail system. This is a high-quality product. It fits perfectly on my DPMS Oracle. This rail allowed me to mount my front back up sight farther forward, so I have a longer sight radius.
Best ar 15 handguard extension
I just added this on my smith and Wesson m&p 15. Had an ugly gas block midway down the barrel and a short handguard, so I wanted to try this out. It took me 5 minutes to put on and fits like a glove. 10/10 recommend