My Cart: 0 item(s)
Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate
Shown with original USGI sling swivel (not included)
The Heavy Duty Model takes advantage of the Sadlak Internal Oval Nutplate using two socket head screws installed externally through the two counterbored holes in the rail. This model allows the removal or replacement of the rail without removing the stock. Depending on the stock, initial installation of the internal nutplate may require Dremel work to recess the oval plate flush to the inside surface.
As illustrated at the right, your original USGI sling swivel is securely held in place by the grooves on the underside of the rail
The Nutplate is installed in the thickest area of the stock
The internal nut plate supplied with the Heavy Duty Fron Rail is significantly stronger than screws and washers and will take the additional load from the bipod without danger of splitting or cracking the stock
Once the HD Front Rail is installed you have flexibility of attaching a clamp-on type BiPod . All hardware and screws have mil-spec. Manganese Phosphate finish. The internal Nut Plate can be further supported by permanently bedding it into the stock using Devcon Steel Epoxy or other bedding compound.
Choose your Front Rail based upon your stock style, i.e. Universal, Wood, Fiberglass, Synthetic or Supermatch.
Alt Description:
- m1a bipod mount
- sadlak m1a bipod mount
- m14 bipod mount
- sadlak m1a front rail
M14 Quick Links:
- m14 scope mount
- m14 bipod
- m14 accessories
- m14 cleaning kit
- m14 bipod mount
- m14 attachments
- m14 tool
- arms m14 mount
- m14 rifle accessories
- m14 sling
M1A Quick Links:
- m1a scope mount
- m1a tools
- best m1a scope mount
- springfield m1a scope mount
- m1a accessories
- m1a bipod
- sadlak m1a scope mount
- m1a sling
- m1a socom accessories
- m1a cleaning kit
- m1a bipod mount
- springfield m1a accessories
- m1a upgrades
- springfield armory m1a accessories
- m1a parts and accessories
- m1a mount
- best m1a accessories
The distinction between inferior quality and premium M1A Mount is undeniable. At MSP, we only offer Scope Mounts from the most trusted brands like Sadlak Industries. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(16)
4
(2)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(16)
4
(2)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
Sadlak M14/M1A Front Rail
Fly Military
Location: NW Washington
Date:
October 4, 2013
Sadlak makes some the best accessories for the M1A/M14 market. This front rail fits the OEM wood stock as if it were factory equipment. The attention to detail and overall excellent quality is very evident. Heavy duty, well designed, top quality, no complaints.
Recommended
quality equipment
wrnchmstr
Location: new iberia la
Date:
October 26, 2012
looks great, works great, recessed nut plate into stock. made foe a very clean install
Recommended
Can adapt
Bubba
Location: Myrtle Creek, OR
Date:
June 18, 2012
When I reviewed this prior to purchasing I went to facebook and a customer was installing on a Socom 16. The wood stock on the M14/M1A is virtually identical to the Socom except that as near as I can tell the comp forestock on the socom has inset screws whereas the M14/M1A does not which made the the internal nut plate not required in my case and the screws that came with the product were too short. Once I found the longer screws I required at a local hardware store everything mounted fine and was able to install the foreend grip on the newly installed front rail.
Recommended
Sadlak M14/M1A HD Front Rail
Milla
Location: New Brunswick, Canada
Date:
May 18, 2012
Precision made, easy install, and fast shipping. Excellent overall.
Recommended
Sadlak M14/M1A HD Front Rail
Interpower
Location: Iowa
Date:
May 1, 2012
This is a very well made piece of gear. I used it to mount a bipod on a GI fiberglass stock I am modifying.
Recommended
GREAT PRODUCT
CRABBY BILL
Location: LEESBURG, FL.
Date:
April 5, 2012
GREAT PRODUCT, BUILT LIKE A TANK. THINKING ABOUT GETTING ANOTHER ONE FOR MY STANDARD S.A. M1A1!
Recommended
