Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate
Shown with original USGI sling swivel (not included)
The Heavy Duty Model takes advantage of the Sadlak Internal Oval Nutplate using two socket head screws installed externally through the two counterbored holes in the rail. This model allows the removal or replacement of the rail without removing the stock. Depending on the stock, initial installation of the internal nutplate may require Dremel work to recess the oval plate flush to the inside surface.
As illustrated at the right, your original USGI sling swivel is securely held in place by the grooves on the underside of the rail
The Nutplate is installed in the thickest area of the stock
The internal nut plate supplied with the Heavy Duty Fron Rail is significantly stronger than screws and washers and will take the additional load from the bipod without danger of splitting or cracking the stock
Once the HD Front Rail is installed you have flexibility of attaching a clamp-on type BiPod . All hardware and screws have mil-spec. Manganese Phosphate finish. The internal Nut Plate can be further supported by permanently bedding it into the stock using Devcon Steel Epoxy or other bedding compound.
Choose your Front Rail based upon your stock style, i.e. Universal, Wood, Fiberglass, Synthetic or Supermatch.
The distinction between inferior quality and premium M1A Mount is undeniable. At MSP, we only offer Scope Mounts from the most trusted brands like Sadlak Industries. Buy with confidence that we stand behind the product we sell.