Magpul Hunter x22 Takedown Stock
Made from high quality reinforced polymer, the Hunter X-22 Takedown features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK® slots for accessory attachment.
The Hunter X-22 Takedown fits standard Ruger 10/22 Takedown .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures proper fit with factory pencil profile as well as heavy bull barrels.
Made in U.S.A.
Features of The Ruger 10/22 Takedown Magpul Hunter x22
- Drop-in design compatible with all factory 10/22 Takedown Stock .22 LR receivers
- Reinforced polymer construction for strength and durability
- 60 degree grip angle from bore axis
- Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
- Non-slip rubber butt-pad
- Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
- Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920” diameter (12.5" minimum length)
- Adjustable barrel tensioning shim in forend for setting barrel preload (barrel may also be free-floated)
- Compatible with all capacities of factory Ruger 10/22 magazines
- M-LOK® slots on forend sides and bottom for a wide variety of accessory and sling mounting options
- Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
- Push-button QD swivel compatibility in rear with optional Sling Mount Kits
- Left and Right rear 1-1/4” Footman’s Loops
International Traffic in Arms Regulations Controlled Product
- Magpul 10/22 stock
- Magpul 10/22 takedown hunter stock
- X-22 hunter takedown
- Magpul takedown
The distinction between inferior quality and premium Ruger 10/22 stock is undeniable. At MSP, we only offer Ruger 10/22 accessories from the most trusted brands like Magpul Stock. Buy with confidence that we stand behind the product we sell.
- Weight: 2.37 lbs (w/two Spacers installed)
- LOP Adjustment Range: ~12.5-14.5 in.
- Width of Forend, max: 1.9 in.
- Width of Butt, max: 1.5 in.
- Butt-Pad Dimensions: 1.5x5.0 in.
Customer Ratings & Reviews
Best Ruger 10/22 Takedown Magpul Hunter X22 for sale is right here
I went from the Multicam factory stock to a Hogue and then this Magpul. Material difference is rigidity, fit and ergonomics. Spend the extra 40-50 dollars and buy the Magpul. 2 barrel channel options- I added a Volquartsen barrel with ease Mlok- having other Magpul gear I dropped in a QD and pic rail. Cheek riser- Magpul is smart! They made the riser the same as their shotgun stocks, so I dropped in the riser that came with my 590a1. This provides proper alignment with the SWFA 6x and works great.
magpul hunter 10/22 takedown stock
I got this Magpul hunter x22 stock for Christmas, and I love it. It is so simple to swap out your old 10/22 stock with this one. I am thrilled with the look it gave my 10/22 when it was all done.
December 28, 2015 Awesome stock, excellent LOP flexibility, quality
If you are taller/broad-shouldered, the extra LOP will be appreciated. Plus, with the 1/2" cheek riser (extra) is perfect for a high scope mount (I have to clear a suppressor). The Ruger 10/22 takedown Magpul hunter x22 fit and finish are excellent - my ONLY gripe is the flex of the stock when the LOP is extended all the way. Very flexy side to side. I wish the engineers at Magpul had a cam over butt plate retention bolt to "suck down" the stack so the stock could be a little stiffer.
Magpul x22 takedown is a Good stock
This Magpul x22 takedown stock fits very well. The only downside is that I had to sand down a lip in the back of the stock so I could get my kids 2 stage trigger to fit properly. There is also some wobble of the recipient, but that is in all 10 22 TD, but I easily fixed it with a cut card sized to take up the slack.
Magpul Hunter x22 takedown is a Great replacement stock
This Magpul hunter x22 takedown stock is well made like all Magpul products with nice fit and finish. Nice adjustability and good tight fit on the receiver. I haven't seen any change in accuracy, but I have not tuned the stock with the barrel tensioning screw in the forearm, really like this stock on my 10-22 takedown.
Magpul 1022 Takedown Stock
This Magpul 1022 takedown stock is a great lightweight stock and you can read the other reviews about it. I would like to address the teeter-totter effect that other reviewers have listed in their reviews. The teeter-totter is caused by an under-sized lug at the back of the stock that is used to engage the back of the trigger group. This is easily fixed by making an aluminum foil shim and setting it in the back of the stock. I fixed mine in about 15 minutes and now it is rock solid. Thank you Magpul for a great product and thank you MSP for excellent service and prices.
Magpul Hunter X22 Takedown
The Magpul X22 Hunter fit, finish & quality I feel is unmatched along with the change in look from Factory to the real deal !! The X-22 is a game changer !! accessible to change from factory stock to the X-22 // improved feel and accuracy // you will be thrilled that you did make this upgrade !!
I am quite impressed with this 10/22 Takedown Stock
I just replaced the factory Ruger 10/22 Takedown stock to the Dark Earth Magpul X-22 stock and was quite impressed in the fit and finish of the new 22 stock. Installation was easy, and it was a bit tight on the tolerances. The tight tolerances is a plus, so it's not a sloppy fit! The only trivial difficulty was in assuming configuration. The instructions said to Convert FROM a Tapered Barrel TO a Bull Barrel nevertheless the stock came already in the Bull Barrel setup. I had to do the translation to the Tapered setup. No Problem it was just a little confusing.
I moved from Multicam factory stock to a hog and after that this Magpul. Material difference is rigidity, match, and ergonomics. Spend the additional 40-50 dollars and purchase the Magpul. 2 barrel channel options- I added a Volquartsen barrel easily Mlok- having another Magpul equipment I fell in the QD and pic railing Cheek riser- Magpul is smart. They made the riser the same as their shotgun stocks, so I dropped from the riser which came with my 590a1. This gives proper alignment with the SWFA 6x and works excellent.
Magpul Hunter X-22 Takedown Stock for the Ruger 10/22 Takedown
Everything you would expect from Magpul. Excellent ergonomics. Quality construction.