My Cart: 0 item(s)
Leupold RM Ruger M77 1-in Scope Ring Mounts
Use as a high-quality alternative to ringmounts sold by firearms manufacturers and as a no-tap mounting method. Because these rings are machined from solid steel, they offer superior integrity and tighter tolerances.
Product Features
- Forged and Machined steel construction.
- Versatile, and available for many different rifles.
- Leupold Ringmounts
- Use as a high-quality alternative to ringmounts sold by firearms manufacturers and as a no-tap mounting method for most .22 rimfire rifles with an 11mm, 13mm, or 3/8" dovetail rail. Superior integrity and tighter tolerances because we machine them from solid stock.
Ring Height: 1" Tube (measured from base of ring to the center of scope tube)
- Low: 0.73"
- Medium: 0.90"
- High: 1.03"
- Super-High: 1.15"
Models:
#LEU-61017 RM Ruger M77 1-in Low Matte
#LEU-170351 RM Ruger M77 1-in Medium Matte
#LEU-49951 RM Ruger M77 1-in High Gloss
#LEU-49952 RM Ruger M77 1-in High Matte
#LEU-49953 RM Ruger M77 1-in High Silver
#LEU-49954 RM Ruger M77 1-in Super High Gloss
#LEU-49944 RM Ruger M77 1-in Super High Matte
#LEU-50166 RM Ruger M77 1-in Super High Silver
If you would like to convert your Ruger M77 with to a rail system, take a look at our Ruger M77 Scope Mount.
The distinction between inferior quality and premium Ruger M77 Scope Rings is undeniable. At MSP, we only offer Scope Rings from the most trusted brands like Leupold Scope Rings. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(0)
4
(0)
3
(0)
2
(1)
1
(0)
Would recommend this product.
0%
out of 5
5
(0)
4
(0)
3
(0)
2
(1)
1
(0)
Would recommend this product.
0%
1 Total Reviews
- 1
Scope rings for Ruger model 77 rifle
Bill
Location: Jacksonville, Florida
Date:
January 25, 2023
1. The scope rings and attached mounts are Leupold type design but were made by Warne company not Leupold. So, it was misrepresented either by accident or on purose. . 2. To fit the scope inside the rings/'mounts the ring/mounts had to be totally disassembled. In so doing I lost one of the two very small locking pins. Since I fitted the scope unit to a .223 caliber rifle which has verry little recoil it caused no problem. 3. Once totally assembled to the scope the rings/mounts were very secure but to use another scope the ring/mounts would need again total disassembly. 4. This set of ring/mounts are not for the novice.
Verified Buyer
1 Total Reviews
- 1
