My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
EGW Savage Round Back Short Action Picatinny Rail Scope Mount - Black
    EGW Savage Round Back Short Action Picatinny Rail Scope Mount - Black
    Purchase EGW Savage Round Back Short Action Picatinny Rail Scope Mount - Black
    • EGW Savage Round Back Short Action Picatinny Rail Scope Mount - Black
      Ratings Snapshot
      5.0
      out of 5
      5 (12)
      4 (0)
      3 (0)
      2 (0)
      1 (0)
      Would recommend this product.
      100%
      SKU: 198-4100
      Manufacturer: EGW - Evolution Gun Works

    • MSRP: $40.00
      $35.99

      Quantity in Basket:  None

    •  

    EGW Savage Round Back Short Action Picatinny Rail Scope Mount

    Description

    Machined from: Domestic 6061 T6 Extruded Aluminum
    Finish: Matte Black
    Hardware: Hex head screws and wrench provided
    Center Spread: 3.930"
    Overall Length: 6.670"

    This Evolution Gun Works - EGW mounts comes standard with a bevel on both sides making it ambidextrous.

    This mount fits:

    • Savage Model 10 Short Action Round Rear Receiver
    • Savage Model 11 Short Action Round Rear Receiver
    • Savage Model 12 Short Action Round Rear Receiver
    • Savage Model 14 Short Action Round Rear Receiver
    • Savage Model 16 Short Action Round Rear Receiver
    • Savage Model 110 Short Action Round Rear Receiver
    • Stevens Model 200 Short Action Round Rear Receiver

    This Savage base will work with any short action round back Savage rifle with an ejection port.

    The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount (listed separately).

    The middle spread is the distance between the two middle holes, center to center, on your receiver.

    This Evolution Gun Works - EGW mounts is available in 0 or 20 MOA.

    Please see our FAQ pages for more information on action lengths and MOA.

    Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

    The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

    Also, in many cases, it will not obstruct usage of factory iron sights.

    EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

    Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

    Available in matte black or silver-anodized.

    This Evolution Gun Works - EGW mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

    Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

    EGW Product #

    • #41000 - Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous
    • #41002 - Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous

    Customer Ratings & Reviews

    12
    Ratings Snapshot
    5.0
    out of 5
    5 (12)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    5.0
    out of 5
    5 (12)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    12 Total Reviews

    Very happy with the purchase of the EGW 41000

    5 out of 5
    Location:
    Date: February 14, 2020

    Very happy with the purchase of the EGW 41000 scope mount for a Savage 11 .223. The item arrived faster than the expected date. And I was thrilled to see MADE IN USA on the front of the package. I would recommend adding that to the product description it would have made my decision to buy this product a natural choice.

    Recommended

    Good mount base

    5 out of 5
    Location:
    Date: February 14, 2020

    Great savage model 12 Picatinny rail, Fits perfect. my only complaint is that the screws seem soft, but they seem to be holding well so far

    Recommended

    Excellent mount.

    5 out of 5
    Location:
    Date: February 14, 2020

    I put this scope mount on my Savage long-range hunter and then installed a Vortex 6X20 scope. Everything went together perfectly, and after breaking in the barrel, I was shooting 1_1/8th inch groups as 200 yards. Excellent mount.

    Recommended

    I had a machinist and a

    5 out of 5
    Location:
    Date: December 15, 2019

    I had a machinist and a gunsmith look at it; I thought it was defective because the screws wouldn't fit right to attach it to the gun. It was the gun! The machinist and the gunsmith both said it was a very well made piece. They were both surprised how well made it was, which meant a lot coming from those two. Ya, unfortunately, I can't say so much for the work of the gun manufacturer in drilling their holes!

    Recommended

    Great mount

    5 out of 5
    Location:
    Date: December 15, 2019

    Put this on top of a Savage 10 .308 heavy barrel. This rifle is meant to be a long-range bullseye rifle with a 16x FFP mil-dot reticle. I am getting excellent groups. A friend also purchased the 20moa one and put it on the same rifle build, and we both love these mounts. Not too pricey and rock solid. Couldn't be happier.

    Recommended

    Nice base for a Savage 12

    5 out of 5
    Location:
    Date: December 15, 2019

    Mounted it on a Savage 12, fit great. Love it, for I can now swap my target scope from gun to gun. I have Night Force rail on my other rifle and can't see any difference between the EGW and the NF.

    Recommended

    Superb Rail

    5 out of 5
    Location:
    Date: December 15, 2019

    I have used EGW rails in the past, and they have always been top quality. This model is no different. I mounted this on a Savage 11 VT 308 WIN. The receiver profile was spot on, as were the bores for the mounting screws (which were also perfect in length). Excellent rail, I could not be more pleased.

    Recommended

    Perfect fit on my savage 12

    5 out of 5
    Location:
    Date: December 15, 2019

    I have bolted to a savage model 12 low profile rifle, perfect fit, easy to install. If I were going to change anything, I would paint those little bitty mounting screws orange because if you drop one on anything other than white floor tile, it's gone.

    Recommended

    Perfect fit on my savage 12

    5 out of 5
    Location:
    Date: December 15, 2019

    I have bolted to a savage model 12 low profile rifle, perfect fit, easy to install. If I were going to change anything, I would paint those little bitty mounting screws orange because if you drop one on anything other than white floor tile, it's gone.

    Recommended

    A good base

    5 out of 5
    Location:
    Date: December 15, 2019

    I put this base on a savage target action, and it fit perfect. The base is a little taller than most two pice bases; when mounting 50mm objective scopes, you may not have to buy such tall rings when using this base.

    Recommended
    12 Total Reviews


    Related Products



    EGW Mounts

    Scope Mount