Ameriglo GL-329 Suppressor Height Sights for Glock | XL Tall set Green Tritium 3 dot sight

14

| Write a Review

Ratings Snapshot

4.9

out of 5

5 (13)

4 (1)

3 (0)

2 (0)

1 (0)

Would recommend this product.

100%

SKU: AGS-GL-329
UPC: 644406902294
Manufacturer: Ameriglo
MFG#: Ameriglo GL-329

Nice Sights! Good fit. Bright! Price was great. Thanks Mounts Plus!

High-quality with exceptional brightness at night. The height is ideal for co-witnessing with a Trijicon RMR. The white rings are not coated, allowing for customization with a sharpie for use with the RMR's dot during the day, and the tritium dials provide visibility for the pistol in a pitch black environment at night, making it easier to maintain the dot in the window. A fantastic value for the price.

I sought to align my iron sights with my Glock 17 MOS and Holosun 507c X2. The Ameriglo sights required minimal filing on the rear sight to fit the standard upper cut. The sights co-witness seamlessly with the HS507C, and the night sight glow makes for speedy target acquisition.

Not all red dots are equal. Some red dots do not allow for proper alignment with traditional sights. Not everyone can afford the most expensive red dots, so taller sights can be used to make up the difference. My clients are pleased with them and it makes me happy. It's a win-win situation where I can earn money and my clients can save money.

We chose Ameriglo over Trijicon for cost reasons several years ago and have not regreted it. The only noticeable difference is that the front sight has a slightly narrower base than the Trijicon one. This may be important in extreme conditions but we have not experienced any problems, even after a drop that directly hit the front sight. Our oldest set has been functioning well for over 8 years now. These sights are solid, easily visible in low light, and the suppressor height rear makes it ideal for weak and single-handed shooting drills."

I was thrilled to upgrade my new G19 gen5 with a set of night sights that would match those on my duty weapon. With proper practice, low-light shooting can be both accurate and effective. I purchased the NC Star (blue) sight pusher and front sight nut tools and was pleased with their performance. The entire process of removing the factory sights and installing these took me about 15 minutes. Although I haven't been to the range yet for fine-tuning the rear sights, I believe I was able to install them as accurately as possible without using a micrometer or other specialized tool. I am very satisfied with the quality and finish of these sights, with no defects seen. The glow intensity and slightly smaller dots, compared to the bulky factory sights, should allow for more effective long-distance shooting. I will update my review if necessary, but so far I am very happy with my purchase.

These ameriglo gl 329 sights are fantastic. The white outlines are bright enough for quick target acquisition, but not too over-the-top or distracting when looking at the gun as a whole. The night glow works great and the transition between light and dark is smooth. Just be careful when shaving down the rear sights and don't push them in too hard, as they can get stuck and be difficult to remove. But I had a problem like this and Ameriglo's support was amazing. They worked with me to fix the issue and I was very impressed with their communication and willingness to help. I even had the opportunity to send it in for assessment and repair. Overall, I don't have a single negative thing to say about these sights. I also have Trijicon HD XRs and I like them too, but these Ameriglo sights really made me realize that the quality is on par with Trijicon, but at a more competitive price.

Installed on a Brownells Glock 19 Gen3 with RMR cut slide, the rear sight required some filing for proper fit. The front sight post does have some play, so ensure that it is straight before securing it with your preferred loctite. Once installed, the sights are solid. The quality and sight picture is comparable to my Springfield Armory 1911-A1 equipped with factory night sights. These sights work well for co-witnessing with an optic, and the sight picture is consistent across platforms. In the photos, I'm using a Holosun 508T-RD-X2 red dot, but my iPhone has trouble capturing it.

I recently purchased this set of ameriglo gl329 sights to upgrade from my old (2013) Ameriglo sights on my 2nd Gen Glock 19. I took a 2-day pistol course and unfortunately, my front sight came off because I didn't secure it properly with lock-tite. The new front sight has a bolder dot, making it easier to quickly acquire. These sights are simple to install with the use of a front sight tool (not included) and plenty of lock-tite. Installing the rear sight was relatively straightforward as well. The new sights are high-quality, bright, and bold. My 4-year-old sights are still in great condition, and the new, slightly brighter front sight helps me pick it up even faster. I highly recommend these sights.

Accuracy depends on the user's skills, but installation wasn't difficult with the right tools. I've had these sights for some time now and they've maintained their shine. Despite hearing some complaints about the company's sights, I've had no issues with these on my .45 ACP Glock Model 40, which I put through heavy use. They've remained aligned with my RMR and perform consistently without fail.

I got them and hated them before I opened the package, a side by side comparison looked like they wouldnt clear the base of my Viper (on a G19 MOS Gen5). But when they were installed they lined up perfectly and I like their lower co witness versus a Trijicon suppressor sight. These are inexpensive and awesome, they are currently on my Gl0ck that I carry for SWAT operations and are reliable, clear and an excellent choice!

If you're looking for a lower 1/3 co-witness sight for your Glock MOS with Holosun 507c, these ameriglo gl-329 sights are an excellent choice. I did my research on sizing, fit, and type of co-witness before purchasing, as I wanted to be able to use the irons in case of a red dot failure in low light. I opted for night sights for added visibility. It's important to note that the lower 1/3 co-witness places the iron sights below the red dot when aiming but still high enough to be used if needed. I've seen many reviews from people who use these sights and fail to specify whether they co-witness perfectly or are lower 1/3, leading to confusion. So, if you're looking for a lower 1/3 co-witness for your Glock 19 Gen 5 with Holosun 507c, these sights will meet your needs.