My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 4.95
Product Search

Secure Checkout
PRI AR-15 Muzzle Brake 5.56MM (223) - Black
    PRI AR-15 Muzzle Brake 5.56MM (223) - Black
    Purchase PRI AR-15 Muzzle Brake 5.56MM (223) - Black
    • PRI AR-15 Muzzle Brake 5.56MM (223) - Black
      Ratings Snapshot
      5.0
      out of 5
      5 (1)
      4 (0)
      3 (0)
      2 (0)
      1 (0)
      Would recommend this product.
      100%
      SKU: PRI-05-0089B
      UPC: 090222551541
      Manufacturer: PRECISION REFLEX

    • $93.00

      1 available for immediate delivery

      Quantity in Basket:  None

    •  

    PRI MSTN QC AR-15 Muzzle Brake 5.56MM (223) black

    The QCB has been cut from solid stainless steel bar stock for greater resistance to heat and burnout. Specs: 304 Stainless .95" dia. X 2.05" long. Black Nitrite finish thread is 1/2"-28 The area over the threaded end of the brake tapers down to a .750" diameter. The brake comes with a selection of spacer shims to set the timing of the brake. The 3 holes should be at the 1 O'clock position when tightened into place. Tighten brake into place using a round screw driver in the 1st slot closest to the barrel.

    Shipping Weight: 0.215 lbs


    The distinction between inferior quality and premium AR muzzle brake is undeniable. At MSP, we only offer AR-15 brakes from the most trusted brands. Buy with confidence that we stand behind the product we sell.

    Customer Ratings & Reviews

    1
    Ratings Snapshot
    5.0
    out of 5
    5 (1)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    5.0
    out of 5
    5 (1)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    1 Total Reviews
    • 1
    Exceptional AR Muzzle Brake!
    5 out of 5
    Location:
    Date: August 8, 2019
    Exceptional Muzzle Brake! The fit and finish were outstanding. No cheap matt blue finish. This is a high-quality AR Brake...you get what you pay for. The added washers (multiple thicknesses) will easily allow the user to "time" the brake. Just wrap a layer or two of masking tape around a round shank screwdriver and place through the side ports to tighten. The ports visible on top in the photo are the only ones on the brake, i.e., there are not small ports on the top left, indicating that this brake is designed to help keep the rifle down and to the left, similar to the AK-47 slant brake. The short of it is this...this brake works awesome! Almost no recoil movement and the noise is not objectionable with basic ear muffs. No need for double protection like some other designs. It's also smaller, in my opinion than it looks in the pictures. It's only slightly larger than an A2 flash hider and looks great on any AR. Worth every penny!
    Recommended
    1 Total Reviews
    • 1