NcSTAR AK-47 Tri-Rail & Receiver Cover
- AK-47 Weaver Style Tri-Rail Mount and Receiver Cover
- Replaces existing AK-47 receiver cover. Fits AKM pattern rifles with a stamped receiver (7.62X39, 5.54X39, .223)
- The Mount provides Three Rails for mounting and Optic onto the top rail and accessories on the side rails like a Flashlight and/or Laser
- The two side rails can be mounted in several positions for mounting flexibility; they are also removable
- Adjustable front tab and two rear set screws are provided for a secure fit
- Aluminum (Rail) and Steel Construction (Receiver Cover)
- Length: 9.4"
- Weight: 11.2 oz
- NcSTAR Patented design: Patent # D555,751
Customer Ratings & Reviews
out of 5
Would recommend this product.
out of 5
Would recommend this product.
good AK-47 Tri-Rail & Reciever Cover
Date: February 8, 2012
Looks good but.. . . .
Location: Afghany-Land High in the mountains
Date: January 29, 2012
While working overseas bought one of these thought it would be a good idea me and the armorer installed it (have to have the armorer there company policy) After about 150-200 rounds it started to lose zero and I noticed wobble in the sight the AKARS from The Parabellum Group is I found to be a much better option.
Very good product
Otter with an AK
Date: January 21, 2012
I got this on a whim and am overall am very glad I did. It took a while to fit it to my WASR 10/63. It turns out it was a good investment. The mount is very solid with virtually no movement. An excellent mount for a Fast Fire red dot. Don't know about a magnifying type of scope, but, I suspect it would work pretty well. I would definitely recommend this if you plan on mounting a red dot, weapon light or laser on your rifle.
Date: January 3, 2012
Over all it was easy to install. I put it on a Romanian made AK.(5.56) It was just a hair longer than the stock cover, but a little work with a dremel and an 80 grit sanding drum, had it on in about 5 minutes. Well worth it.
Date: December 27, 2011
Great cover. enough said
LIKE A CHARM
Date: October 15, 2011
I was worried that I would have to file and grind to get this to fit on my Bulgarian AK.It slipped on as aesy as the stock cover.
Nc Star AK-47
Date: September 23, 2011
This Reciever Cover is about an inch longer than needed and a bit wider than needed. I had to use a grinder to grind it down shorter. The front rail support is too long and I had to file that down to the 1st bolt completely shaving the fron bolt off to fit. Not worth the money. It is basically a weak cover that is hard to get to fit. I mopunted a scope on it and test fired. The scope is not good on this rail system. It is too loose and it is not accurate and never will be. The two screws on the rear are the only thing that helps snug it up but the more you try to get it tight the higher the rear of rail will rise and then come off over the lip it should be holding it in. Not Practicle. Don't buy. I found the same rail at Cabela's for much less than this company sells it for.
Best $22 ever spent!
Date: August 24, 2011
I have bought 2 of these and will soon buy the third! I have had to do no filing down or modifying when installing them on my romanian or saiga, but I hear that its a little difficult to fit to the mak90 and ak74. Also supposed to work well on bulgarian ak47s. I have had no trouble with accuracy out to over 300yds. You may have to loosen the screws on the back, adjust, and retighten a few times for accuracy at that distanse though. I really like that I can still use the standard sights.
Location: Branson Mo.
Date: August 22, 2011
Its worth the purchase.
Date: August 13, 2011
Fairly nice fit but it will require some hand fitting and filing. It is fairly loose, so at distance it will through your optics off. Mine is pretty worthless past 200 yards and its about 3" off at any direction at that point. I think someone would be better off going with a handguard with a rail.