DPM Recoil Reduction System for Smith & Wesson M&P Shield, Shield M2.0 9mm/40S&W & M&P Shield Plus
The DPM Recoil Reduction System is a direct replacement for the stock recoil rod and does not change the configuration of the gun. This system works due to the multi spring intricate rod (three springs) and controls the functionality of the gun. The third spring which is contained within the rod controls the movement of the slide so it never rams on the frame. Also accompanying this system are two separate springs so the owner can fine-tune the weapon for his/her personal standards.
The slide extended system is an innovation of DPM Systems Technologies and it is available only for the subcompact pistols.
A plug (bushing) is used in cooperation with the DPM Recoil Reducer System so as to create more space in the slide of subcompact pistols so these models can accommodate the DPM Mechanical recoil reduction system.
- M&P Shield -
- M&P Shield M2.0
- M&P Shield Plus 3.1 Barrel
Note - Does not fit the Performance Center M&P 9 SHIELD PLUS
Advantages and Features of the DPM M&P Shield Recoil Spring
- Faster follow up shots
- Improved firing speed
- Slide and Frame Protection
- Elimination of jams
- Significant recoil reduction
- Better double-tap concentration
- Better control and greater accuracy
- M&P Shield guide rod
- M&P Shield 9mm guide rod
- M&P Shield recoil spring upgrade
- M&P Shiel 9mm recoil spring upgrade
- M&P Shield Plus guide rod
- M&P Shield Plus recoil spring
- M&P Shield M2.0 guide rod
- M&P Shield M2.0 recoil spring
M&P Shield Links
- m&p shield 9mm upgrades
- m&p shield 9mm accessories
- m&p shield plus accessories
- m&p 380 shield ez accessories
- s&w shield 40 accessories
- m&p shield upgrades
- m&p shield 2.0 upgrades
- smith and wesson m&p shield 9mm accessories
- m&p shield ez 9mm upgrades
- m&p shield 2.0 accessories
- m&p shield sights
- m&p shield holster
- speed loader 9mm
The distinction between inferior quality and premium M&P Shield guide rod is undeniable. At MSP, we only offer M&P Shield Accessories from the most trusted brands like DPM. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
DMP Recoil Reduction System for 9mm Shield Plus
I didn't notice much difference in the recoil but it seemed to go into battery quicker.
Greatly reduces effort to pull back the slode
I have a M&P Shield 1.0 and pulling back the slide was very hard. Putting on this new recoil spring reduction system greatly reduces recoil but also makes pulling back the slide when necessary very manageable.
I recently installed the DPM recoil reduction kit for my M&P Shield 9mm. Was very easy to install. Just remove stock Recoil Spring assembly and install new DPM assembly. I went with the smaller spring that came already on the unit. Just came back from the range. All in all I did not notice a difference. Wish I’d brought along the stock set up so I could have shot them one a a time. The thing I did notice was that in 200 rounds I had 4 failure to feed issues. These were all because the spent casing was not ejected and the new shell jammed in the chamber sideways. I’ll have to do some more shooting to see if this continues. Could be something else. We’ll see.
DPM S&W Shield recoil reduction
The DPM M&P Shield recoil spring made my shield so much better and the best operating system ever.
M&P Shield reduced recoil spring
If you are looking for an S&W Shield recoil reduction, this is what you are looking for. While you do have to use a little trial and error if it comes with two m&p shield recoil springs after you break it in, it is fantastic. I loved it so much that I have ordered another for my new Beretta 92fs Inox.
Short spring has mega recoil. Long spring would not allow slide to be captured in the open position! WTF? Returning to factory setup! No way I would trust this on an EDC pistol. Disappointed!