My Cart: 0 item(s)
Fits: Most stamped receivers. Will not fit milled receivers.
*Will not fit the O-PAP/N-PAP M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)
*ATI AK-47 stocks are not compatible with any AK-47 that has an under-folding stock or was originally designed to have an under-folding stock like the NMH-90, etc.
Six-Position Adjustable Side-Folding Strikeforce Stock with Scorpion Recoil System, Ventilated Handguards, Pistol Grip and Adjustable Cheekrest
- 6-Position Adjustable Side-Folding Stock
- Can be Fired from Folded Position
- TracLOCK System
- Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
- Provides Smooth Secure Stock Adjustments
- Eliminates the Need for Secondary Locking Mechanisms
- TracLOCK System
- No Snag Points
- Dual-Sided QD Attachment Point
- Scorpion Recoil System – Absorbs Recoil Energy
- Scorpion Razorback Recoil Pad – Non-Slip, Removable
- Scorpion Recoil Pistol Grip – Ergonomic, Sure-Grip Texture
- Recoil Impact is Absorbed – Shooting any Load Size can now be Done With No Pain Being Transferred to the Shooter
- Not Affected by Chemicals
- Remains Flexible in Extreme Temperatures
- Removes Limitations from Spring and Piston Type Recoil Suppression Systems
- Ergonomic, Textured and Ventilated Upper and Lower Handguards
- 4 Picatinny Rails
- One 4” Picatinny Rail
- Two 2” Picatinny Rails
- One 2” Picatinny Rail with Swivel Stud
- Blank Inserts for when Rails are not in use
- Removable/Adjustable Tactical Cheekrest
- Elongated Design to Fit All Users
- Includes Short Cheekrest with ½” of Adjustment
- Removable/Adjustable Tactical Cheekrest
- Slot for Tactical Sling Attachment
- 3 Sling Swivel Studs
- Includes Steel T-Nut and Bolt
- DuPont®Extreme Temperature Glass Reinforced Polymer
- Manufactured in the USA
- Limited Lifetime Warranty
Side Folding Stock Note: Your firearm must meet SEC 922R requirements to retain the adjustable buttstock in the folding buttstock configuration. If your firearm does not meet the SEC 922R requirements, you must equip the firearm with a fixed position and non-folding buttstock.
SEC 922R: Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.
Warning!!! - Do Not Over Tighten Screws
Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(2)
4
(1)
3
(1)
2
(0)
1
(0)
Would recommend this product.
75%
out of 5
5
(2)
4
(1)
3
(1)
2
(0)
1
(0)
Would recommend this product.
75%
4 Total Reviews
- 1
Where to start ?
rebel
Location: Your moms house
Date:
August 9, 2018
Let me start by saying I did get the stock and guards installed. Let me also say that it would not be possible if I was just a normal man. Over half the hardware was missing, to include the m6x1x25 cap screw that holds the pistol grip on. I had to go out to Lowes for that one. The sling studs I will have to order from Amazon. One whole bag of parts was missing, along with some other hardware. It was obvious this had been returned as the stock had been slipped on to the yoke then removed. As far as I am concerned this was poor customer service. They sent it to someone but failed to check it out when it came back in. It was also missing the recoil pad, that I will have to buy someplace else since I am never going to buy anything from these jokers again. The stock is a good deal if you can get all the parts with it !
Fit perfectly
Ernie
Location: LA
Date:
December 1, 2017
Fit my AK-47 WASR 10 perfectly. Fast shipping! Great price! Product is exactly as described. I would definitely buy this again.
Verified Buyer
Recommended
Fit perfectly
Ernie
Location: LA
Date:
December 1, 2017
Fit my AK-47 WASR 10 perfectly. Fast shipping! Great price! Product is exactly as described. I would definitely buy this again.
Verified Buyer
Recommended
MAK 90
Slick
Location: USA
Date:
May 11, 2017
To start, I love this stock set! I gave it 4 stars because I was missing one of the 2 inch rails. Took a good bit of fitting to my stamped receiver MAK 90, and I'd give 50 bucks jus for the grip. Customer service is great! Thanks Mounts Plus!
Verified Buyer
Recommended
4 Total Reviews
- 1