BULLPUP RIFLE STOCK
MARLIN 60 TUBULAR FED
OPTIONAL: Muzzelite Bags
click to enlarge
The most striking feature of the MUZZELITE bullpup stock, when attached to your action, is the overall length of 26-1/2". This allows you to carry the rifle with much greater mobility. Whether your sport is hunting or plinking, the MUZZELITE bullpup stock will convert a long rifle into a compact weapon system in just a matter of minutes!
The stock itself has fixed sights which are adjustable for windage and elevation. The windage is done with the rear sight and the elevation is done with the front sight. The stock also comes equipped with a scope mount which attaches in the handle.
Construction is of fiberglass reinforced plastic. Required Allen wrench is included.
- Bullpup stocks cannot be fired in a left handed position and are therefore only suitable for right handed shooters.
- Some high capacity magazines may not clear the pistol grip.
- No order to Canada
To comply with Federal Law, not only must your rifle have a 16 inch or longer barrel, but the overall length of the weapon must be 26 inches or greater. Placing a rifle with a relatively short barrel in a Muzzelite stock may result in violation of the 26 inch length restriction, even though the barrel length remains in compliance. Muzzelite stocks are 23 inches long, and so require a minimum of 3 inches of barrel extension beyond the stock.
It is your obligation to measure the overall length of your weapon, out of the stock, to ensure it will remain in compliance with the 26 inch length restriction when placed in a Muzzelite stock. If your weapon has a barrel that complies, but the overall weapon length will not meet the 26 inch restriction if placed in a Muzzelite stock, do NOT, repeat NOT, assemble your weapon in the Muzzelite stock.
Remember that these restrictions are only those imposed by Federal law. Some states or localities may impose additional restrictions. It is your obligation to research ALL laws applicable to your locale, and to remain in compliance with ALL applicable laws, not just Federal restrictions.
This notice does not apply to any NFA weapon to which length restrictions are inapplicable, which has been lawfully approved for possession by the BATFE and local governments.
Again, it is your obligation to ensure that your weapon remains in compliance with ALL applicable length restrictions. Muzzelite is not responsible for your assembly of non-compliant weapons.
Customer Ratings & Reviews
Great product when finished. Only 2 nags. # 1 is the instructions were missing a couple key parts to assembling your new stock. Just make sure to take your time and be a little mechanically inclined. # 2 the iron sights do not adjust and are basically there just for looks so you will need a scope or sights of some kind to add onto the included rail. Overall awesome upgrade and mountsplus was great with customer service and on time shipping!
GREAT Quality and Fit...instructions need help
Four stars, because I could figure out what was not clear in the instructions. This product will give new life to a very old rifle, because it just sat in the safe with the original stock being in too good of condition to take out into the Texas out-of-doors. Plus the Bullpup design makes the rifle much more versatile.
Muzzelite bullpup stock for the Marlin 60 tubular fed
This is a very nice product and my experience overall was wonderful
Sturdy but light and well balanced
What a great way to modernize an old tube fed rim fire rifle to a more balanced setup. This stock has a unique feel, it feels like the weight of the rifle is balanced over the grip. The trigger mechanism feels reasonably Stout and does not have any Hang-Ups. When I received the stock it was missing couple parts. I called mounts plus, and the customer service was so great. I received the replacement parts less than 48 hours later with extra parts to spare because they sent the whole new hardware kit. They even sent a follow-up email to make sure I receive the parts and the stock was completed with satisfaction. Thank you for the great customer service and the great product.
New look for a simple rifle
Looks neat but needed custom fitting for my pre 1994 marlin... had to grind some plastic to fit rounded trigger well inside the stock. Trigger is finicky but oil helps a little.
I had to do a surprising amount of work on this to get it to fit the gun it was made for they had this wood block painted black that covered an in used hole it was way too thick also had too big of an opening for the action I had to shave off plastic in front of the trigger to get it to work....That said after it was all fitted it was a kick to shoot made the gun well balanced
Perfect fit easy install, Simple clear instructions. gave my old plinker a new life =)
Know what you are buying.
I love the stock. I gave three stars because 1. The directions are horrible. You will be putting parts on and taking them off if you follow the directions. 2. The molded plastic parts feel cheep and are not finished. They should have spent a little time shaving off the seams on the molding 3. Stock did not fit perfect. I had to shave down the stock where the barrel exits and a block inside where the recieved is. If this stock was more expensive I would give it less stars. For the price it is awsome if you want to turn your .22 into a plinking assult rifle. Moving the center of gravity back help a lot. If you are OK with the problems above then buy this stock, you won't regret it.
I found this stock, to be very versitile, it is very easy to modify, to fit a Sear's Tube feed. .
Everything fit good but had to shave down where barrel and mag tube exit. It's just a little to tight in that area this is why u must shave or file down a little other then that it is accurate my 13 year old loves it and sighted it in to where he was shooting quarter patterns at 20 yards open sight.