MUZZELITE Ruger 10/22 Bullpup conversion Kit
The most striking feature of the MUZZELITE bullpup stock, when attached to your action, is the overall length of 26-1/2". This allows you to carry the rifle with much greater mobility. Whether your sport is hunting or plinking, the MUZZELITE Ruger 10/22 Bullpup Stock will convert a long rifle into a compact weapon system in just a matter of minutes!
The stock itself has fixed sights which are adjustable for windage and elevation. The windage is done with the rear sight and the elevation is done with the front sight. The stock also comes equipped with a scope mount which attaches in the handle.
Construction is of fiberglass reinforced plastic and fits stander barrels and heavyweight barrels (with minor modifications).
Required Allen wrench is included.
- Bullpup stocks cannot be fired in a left handed position and are therefore only suitable for right handed shooters.
- Some high capacity magazines may not clear the pistol grip.
- No order to Canada
Muzzelite stocks have been a safe and effective alternative stock for many years. While there have been no reports of injury, it has come to our attention that in some cases, dimensional differences in receivers may allow some rifles to move within a Muzzelite stock. In that event, an unintended discharge is theoretically possible. If you have any question about your rifle in its Muzzelite stock, please call 1-800-428-9394. If you have concerns, we can help you arrange to ship your rifle for examination. Shipping costs would initially be borne by you. If your rifle and receiver combination permits any movement of the rifle within the stock, we will upgrade your stock with two alternative parts, re-install the rifle, test it for function, and return it. If your rifle requires upgraded parts, the upgrade will be done without charge and your shipping costs refunded to you.
To comply with Federal Law, not only must your rifle have a 16 inch or longer barrel, but the overall length of the weapon must be 26 inches or greater. Placing a rifle with a relatively short barrel in a Muzzelite stock may result in violation of the 26 inch length restriction, even though the barrel length remains in compliance. Muzzelite stocks are 23 inches long, and so require a minimum of 3 inches of barrel extension beyond the stock.
It is your obligation to measure the overall length of your weapon, out of the stock, to ensure it will remain in compliance with the 26 inch length restriction when placed in a Muzzelite stock. If your weapon has a barrel that complies, but the overall weapon length will not meet the 26 inch restriction if placed in a Muzzelite stock, do NOT, repeat NOT, assemble your weapon in the Muzzelite stock.
Remember that these restrictions are only those imposed by Federal law. Some states or localities may impose additional restrictions. It is your obligation to research ALL laws applicable to your locale, and to remain in compliance with ALL applicable laws, not just Federal restrictions.
This notice does not apply to any NFA weapon to which length restrictions are inapplicable, which has been lawfully approved for possession by the BATFE and local governments.
Again, it is your obligation to ensure that your weapon remains in compliance with ALL applicable length restrictions. Muzzelite is not responsible for your assembly of non-compliant weapons.
- Ruger 10/22 bullpup conversion kits
- Ruger 10/22 bullpup
- 10/22 bullpup conversion stock
- 10/22 bullpup
- Ruger 10/22 bullpup stock kit
- Bullpup stock
- Ruger 10/22 chassis bullpup
- 10/22 bullpup stock
- 10/22 bullpup rifle kit
- Bullpup 22
- Ruger 10/22 conversion kit bullpup
- Bullpup 10/22
- 10 22 bullpup
- Ruger 10/22 bullpup stock
- Ruger 1022 bullpup conversion
- 1022 bullpup
Ruger 10/22 Quick Links
- ruger 10/22 stock
- ruger 10/22 ar stock
- 10/22 stock
- ruger 10/22 stocks
- 10/22 ar stock
- ruger 10/22 tactical stock
- 10/22 stocks
- 10/22 tactical stock
- 10/22 folding stock
- ruger 10/22 folding stock
- ruger 10/22 tactical stocks
- 1022 stock
- Ruger 10/22 bullpup
- 10/22 bullpup
- ruger 10/22 takedown stock
- Ruger 10/22 scope mount
- Ruger 10/22 accessories
The distinction between inferior quality and premium 10/22 Stock is undeniable. At MSP, we only offer Ruger 10/22 accessories from the most trusted brands. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Love this stock! install was a breeze but edges of two halves had to be scraped w/ knife edge to remove rough edges. Sighting is next to impossible if you wear bifocals and using stock sights but easily remedied with a red dot or reflex sight. Expected FTF with trigger mechanism but after running over 300 rounds through it only had one FTF and that was a magazine feed problem. if you dont like the height of your scope you can drop it 3/8" by using a standard AR15/M16 carry handle rail. 50rd drum mags will fit but are nasty uncomfortable when trying to reach the grip/trigger. Wife loves the size and is not intimidated to pick it up and shoot like she would be with a bigger/longer rifle. She even asked me to teach her how to strip/clean it before she shot it and is excited about getting her own and accessorizing. This stock makes a great addition to an already fun/reliable platform. only drawback I see is stock is a little loose along seam on bottom of butt stock and using 1 flathead screw and the rest allen just seemed like a design oversight but not enough to stop me from recommending.
Used for Over a Year
I have owned this and kept this stock on for over a year now, and it is still a delight, so much so that I came back to this website just to write a review. For $110, compared to any other fold-able or otherwise modded stock, this is the best out of five I have put on my favorite weapon, the 10/22. I use the most dependable 25 round magazine, Eagle Creek, and with a slight modification, it fits. Take a small drill and a pair of needle nose pliers to the rear bottom part of the pistol grip, and remove just the bare minimum amount of plastic to make it fit. It even holds the magazine more securely after you do this. Make sure you smooth out the plastic from your handiwork or you will cut or scrape your pinky knuckle pulling it out! Another mod I did was attaching a rail underneath the fore-grip with two wood screws for a laser sight. There is still enough room for your hand(I have big hands). Use a drill bit slightly smaller than the screws you put in. The last thing is my only complaint about this stock. The sights that come with this suck. You can barely see the rear sight even with reflective paint(I tried). I put a red dot scope on it for a bit, but it wasn't quite right. I ended up using a 10X scope and a laser sight. This thing is perfect and it looks really bad-ass for a weapon with such a small caliber. It's great for small game, and maybe someone killed something larger with it recently. That person might be enjoying red meat.
Makes .22 Caliber Fun Again!
For most people, the cheapness of .22 caliber plinking is a real draw, but most .22 caliber rifles are the opposite of cool, they look more like something you inherited from your grandfather than an exciting gun. This stock completely revitalized my plinking hobby, made shooting .22 cal fun again, and enabled me to teach my small children about gun safety and proper form and shooting techniques (standard length rifle stocks are too long for their little arms, they could barely reach the trigger, let alone the fore-end). The sight mounting rail is rigid enough and holds a sight-in indefinitely. The high strength composite is also very tough and dimensionally stable over varying temperatures. This stock has absorbed all the abuse I could throw at it, and still functions flawlessly.
Muzzelite Bullpup review
Stock installed in about 3 minutes with no issues.
Muzzelite Bullpup, Ruger 10/22 Rifle Stock
This was the easy kit to install , up and shooting within 1 hour, Great piece to replace your long gun into a tactical looking rifle.
MUZZELITE BULLPUP RIFLE STOCK
I had to cut the pistol grip to get a 30 round- yes they did warn me. No big deal though. It is fun and that was why I bought it.
Discover the ultimate Ruger 10/22 Stock upgrade with our Muzzelite Bullpup Stock, designed to transform your Ruger 10/22 rifle into a compact and powerful firearm. Our premium-quality Ruger 10/22 Stocks provide unparalleled ergonomics, accuracy, and aesthetics for your shooting experience. Don't miss out on this must-have Ruger 10/22 Stock upgrade for enhanced performance and a modern look. Visit MountsPlus.com today and find the perfect Ruger 10/22 Stock to customize and optimize your rifle for a superior shooting experience.