My Cart: 0 item(s)
Impact Weapons Components RDAK-M4 AK to AR Stock Adapter
AK to M4 Stock Adapter
The RDAK-M4 AK to AR-15 stock Adapter was designed by Jim Fuller and Rifle Dynamics, but was manufactured by Impact Weapons Components.
Features and Benefits of the IWC AK Stock Adapter:
- Allows the use of an AR-15 end plate and different slings set ups, thereby providing different sling-mounting choices for users.
- Can work with any sling adapter the matches on the AR buffer tube, such as the Noveske QD End Plate or MagPul ASAP.
The installation of the RDAK-M4 AK to M4 Stock Adapter is very easy and does not require any modification to the AK, as it matches perfectly inside the tube of the adapter. The adapter works perfectly with MIL-Specs Receiver tubes.
The distinction between inferior quality and premium AK-47 Stock Adapter is undeniable. At MSP, we only offer AK accessories from the most trusted brands like IWC. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(8)
4
(2)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(8)
4
(2)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
10 Total Reviews
- 1
Very cool product
Super D
Location:
Date:
February 13, 2020
I got one of these rifle dynamics ak to m4 stock adapter for my tantal. It's a two-piece bracket. Attaching it is a piece of cake. And then, all you need is to attach a buffer tube buffer plate and castle nut. It works with all kinds of AR goodies like sling attachment plates, and you can even use a rifle buffer and a robust stock on it as well. If you want AR stocks on your AK, this allows you any stock you wish to as long as you have the right buffer tube.
Recommended
not quite a better mouse trap
gunschip
Location:
Date:
February 13, 2020
A very well made & well-fitted item, the receiver end cap/buffer tube attachment piece looks like it came on the rifle. Much nicer than the Vltor M4 stock adapter. The buffer tube is now inline with the barrel, which should help with recoil. The only downside is now the stock is far too high to use the iron sights (the stock rear sight or the Texas Weapon Systems Dog Leg scope mount rear peep sight). But you get a better cheek weld if mounting a scope or red dot (using either the side saddle scope mount or Texas Weapons System dog leg scope mount).
Recommended
Solid Adapter
IB SoCal
Location:
Date:
February 13, 2020
The nicely machined piece, and I have this mounted on my Romanian AK-74 with a Magpul CTR stock. It gives you a great height to use a scope or red dot but is too high to get a good picture of your iron sights, and that is why I only gave four stars. If you don't plan on using optics, go with the Vltor. If you do plan on using optics, buy the Rifle Dynamics adapter.
Recommended
Rock solid
kestertr
Location:
Date:
February 13, 2020
I installed this ak m4 adapter on my saiga AK47, and it was rock solid on. I would recommend this item to other people who want to convert there AK to a t6 style stock.
Recommended
Great AK Stock Adapter
Delta Elite Man
Location:
Date:
February 13, 2020
Great stuff this rifle dynamics ak to m4 stock adapter. Installation was easy. Perfectly fit my WASR 10 AK-47. It looks like it was meant to be there. No machining marks at all. *Make sure to use Loctite on the screws. After 90 rounds, the mounting screws loosened up. A little dab of thread locker took care of that.
Recommended
Almost 5 Stars
Tony No Baloney
Location:
Date:
February 13, 2020
Nice ak ar stock adapter. Great conceptually. Little puzzled why the receiver portion isn't flush with the rear of the receiver and has to be shimmed with plastic washers, which doesn't seem like a right solution. Why not extend it to fit flush or provide a shim with more bearing surface if that isn't possible? One-piece would be awesome! Anyway, a nicely machined part that is the only one of its kind that I am aware of and will do it for me even if I have to develop my own shim.
Recommended
Would give more than 5 stars
Baumont
Location:
Date:
February 13, 2020
This ak m4 stock adapter fits DDI Stamped ak-47s -Compatible with voltor buffer tubes -Raises the stock more in line with the barrel (recoil control) -Easy to install (uses metric Allen wrenches) -Rock-solid stability (provided you use thread locker, blue preferred)
Recommended
Nice but Harware issue
Shappy
Location:
Date:
February 13, 2020
Overall this is an excellent ak to ar stock adapter, could use the shims cut down a to get better fit. HOWEVER, they either shipped the wrong hardware to mount the block or drilled the block for the wrong thread, which the latter is what I am assuming. I had some screws, so not all is lost, but a bit disappointing for a piece that is not cheap. It is a great design and works well. It would be better if you didn't need a stock plate, and there was a detent to keep the rotation correct, and then add a QD connection on the back.
Recommended
YES, IT REALLY DOES FIT!
Necromancer
Location:
Date:
February 13, 2020
I was skeptical that this would go on a Saiga .410 without a lot of effort. I was absolutely wrong. I expected it to have exterior dimension problems creating snag points or odd edges. I was absolutely wrong. I added a few thousand in brass shims between the rear trunion and the adapter and used SS washers in place of the Delrin washers, which were included, but these changes were unnecessary. It is an installation breeze, looks excellent, and is rock-solid. I intend to convert other AK/Saigas with this m4 stock adapter which is much superior to different designs.
Recommended
Rdak-m4
Ryan
Location: Texas
Date:
December 26, 2017
Exactly what I wanted and need. Easy instructions, easy to install, simple design.
Verified Buyer
Recommended
10 Total Reviews
- 1
Related Products
