My Cart: 0 item(s)
![EGW Steel HD Springfield 03A3/03A4 Picatinny Rail Scope Mount EGW Steel HD Springfield 03A3/03A4 Picatinny Rail Scope Mount](graphics/en-US/cssui/blank.gif)
EGW Steel HD Springfield 03A3/03A4 Picatinny Rail Scope Mount
Description
Machined From: 4140 Carbon Steel
Finish: Parkerized
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx® Screws and Wrench Provided
Overall Length of Mount: 5.488"
This scope mount is for the 03A3 and 03A4
Uses the 03A3/03A4 2 screw hole pattern
Includes 2 screws. One 1/4" screw for the front and one 1/4" screw for the rear.
Engages back of dovetail for a recoil shoulder.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the scope mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish.
Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package!
From manufacturing to packaging, EGW’s products are made with pride in the USA.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately)
Finish: Parkerized
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx® Screws and Wrench Provided
Overall Length of Mount: 5.488"
This scope mount is for the 03A3 and 03A4
Uses the 03A3/03A4 2 screw hole pattern
Includes 2 screws. One 1/4" screw for the front and one 1/4" screw for the rear.
Engages back of dovetail for a recoil shoulder.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the scope mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish.
Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package!
From manufacturing to packaging, EGW’s products are made with pride in the USA.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately)
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(1)
4
(0)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(1)
4
(0)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
1 Total Reviews
- 1
Springfield 03a3 Scope Mount
Hall
Location:
Date:
November 5, 2019
Quality is good, But the base is very thick. Fit my Springfield 03a3
Recommended
1 Total Reviews
- 1