EGW Ruger 10/22 Picatinny Rail Scope Mount
Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
EGW Ruger 10-22 mount is made specific to the gun.
This scope mount will not fit the 10-22 takedown. We will be coming out with a new 10-22 scope mount soon that will alleviate this issue.
This Evolution Gun Works - EGW mounts is available in a 0 or 20 MOA. Please see our FAQ pages for further information on action lengths and MOA.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW
EGW Product #
- #44020 - Ruger 10-22 Picatinny Rail Scope Mount 0 MOA Ambidextrous
- #46102 - Ruger 10-22 Picatinny Rail Scope Mount 20 MOA Ambidextrous
10/22 Quick Links:
- Ruger 10/22 scope mount
- Ruger 10/22 stock
- Ruger 10/22 accessories
The distinction between inferior quality and premium Ruger 10/22 Scope Mount is undeniable. At MSP, we only offer Ruger 10/22 accessories from the most trusted brands. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
EGW makes good stuff
There are limited options for high-quality ruger 10/22 20 moa rail and I went with this one because it is slightly longer than the other options, giving me more mounting options. I mounted a full-size SWFA SS classic scope on it with ease for long-range rimfire shooting. The screws securely fit onto the receiver without extending out the other side, which is a bonus. Overall, this rail works great.
With a little work, gets my 10/22 out to 300 yards.
I use my 10/22 for 300-yard competition shooting. The 20 MOA base and Nikon P223 scope don't quite get me on target at that distance, so I've added a shim made from an aluminum soda can. This allows me to be perfectly on target with my scope elevation maxed out. While I would prefer a 25 or 30 MOA base, those are not available for the 10/22, so I'll make do with the 20 MOA base.
It works well. Just be sure if the 20 MOA is what you need
A 0 MOA mount should suffice for my needs, although I do have a scope with 80 MOA range. This rail is longer than standard, allowing me to mount my scope about 1 to 2 inches further back. It does extend slightly over the barrel, but it should still be fine. I wish it was another inch longer though, as the eye relief on my scope appears to be rather long. Perhaps I should consider a longer stock instead, for a better fit.
EGW Ruger 10-22 picatinny rail scope mount 20 moa
I bought this base to use to mount a Tech Sight peep rear to the 10/22. I turned the base around so the sight would extend a bit behind the action. In this, I was able to extend the sight radius by another inch and a half, and even more importantly, it gets the peep a bit closer to the shooter's eye.
My ruger receiver was bored with the dreaded barrel droop
This Ruger 10/22 Picatinny rail 20moa is precisely what I needed. My Ruger receiver was bored with the dreaded barrel droop. I ran out of the elevation and was hitting two inches low at 25 yards. Now have the rifle zeroed at 100 yards.
Yep...does its job
Works great, built well, wish they made a 30 MOA! I can get out to 200 no problem now, but my BSA Sweet 22 runs out of turret for 300 yards...a few more MOA would be awesome, so I may do the ol' shim trick to get it there....booo!
The egw Ruger 10-22 Picatinny rail went on quickly. Machine work is top-notch. I didn't even require any bedding material to fit my receiver. It allowed me to get some adjustment back in the optic.
Ran out of elevation on my high-powered scope on my ...
Ran out of elevation on my high-powered scope on my 10/22 and was still shooting three dots low on the reticle. This rail fixed it. Mounts up solid and gives you 20 more MOA to work with.
Slapped this 10/22 scope mount on and I was good to go
Was having trouble getting a new scope sighted in. I didn't have enough elevation to get on target even at 50 yards. I tried various height rings but still wouldn't work. Slapped this EGW Ruger 10/22 Picatinny rail 20moa on, and I was good to go. Went on smoothly -- excellent-provided screws. Worked like a charm.
Good 10/22 scope mount for the money
This 10/22 scope mount is very easy to install and was a perfect fit for the Ruger 10/22 receiver. Very solid construction for attaching scopes and other red dots.
Ruger 10/22 scope mount
This scope mount is well made and fits the Ruger 10/22 correctly. I got it so the scope could be mounted further forward. No, I can get a good eye position on the scope while maintaining a comfortable head position.
EGW Ruger 10-22 Picatinny rail is Excellent
Great Picatinny rail, loads of space for larger optics & very well made. Just remember that you cannot use the factory iron sights with this rail installed.