Marlin 1895, 336, 444, Camp Carbine 9mm, Camp Carbine .45 Picatinny Rail Scope Mount
This EGW Marlin 1895 Rail fits:
- Marlin 1895
- Marlin 336
- Marlin 375
- Marlin 444
- Marlin Model 36
- Glenfield 30
- Henry 3030(H009)
- Henry 4570(H010)
- Henry .410(H018) Only fits the 20" Barrel
- Camp Carbine 9mm (does not fit the early models, the hole spacing is different)
- Camp Carbine 45
Rail Type: One Piece Picatinny
Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Anodizing
Center Spread: 2.75"
Overall Length: 5.094"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Torque Specs: 20 in/lbs
Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This Evolution Gun Works - EGW mounts is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!
We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
- Marlin 1895 picatinny rail
- marlin 1895 trapper picatinny rail
- Marlin 336 picatinny rail
- Marlin 444 picatinny rail
- Henry H009 picatinny rail
- Henry H010 picatinny rail
- henry h010 scope mount
- Camp Carbine 9mm picatinny rail
- Camp Carbine 45 picatinny rail
- marlin 1895 trapper scope mount
- Marlin 1895 scope mount
- Marlin 336 scope mount
- Marlin 444 scope mount
- Henry H009 scope mount
- Henry H010 scope mount
- Camp Carbine 9mm scope mount
- Camp Carbine 45 scope mount
- marlin 1895 trapper scope base
- Marlin 1895 scope base
- Marlin 336 scope base
- Marlin 444 scope base
- Henry H009 scope base
- Henry H010 scope base
- Camp Carbine 9mm scope base
- Camp Carbine 45 scope base
EGW Quick Links
- egw guns
- egw scope base
- egw red dot mount
- egw mounts
- egw gun parts
- egw bases
- egw dovetail mount
- egw sight mount
- egw scope mounts
- egw scope bases
- egw precision parts
- egw mount
- egw picatinny rail
- egw mounting plate
- egw scope mount
- egw optic mount
The distinction between inferior quality and premium Marlin 336 Mount is undeniable. At MSP, we only offer scope mounts from the most trusted brands like EGW Mounts. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
This henry h009 picatinny rail is superior to the Weaver 63B mount. I purchased it for my Henry H009G and it appears to be a perfect match, as if it came directly from Henry. It is compatible with both Marlin and Henry 30/30's as well as the Henry 45/70. Although it costs more than the Weaver, its superior quality and perfect fit make it worth the investment.
Decent construction, included hardware
The marlin 1895 trapper picatinny rail appears to be strong, but there is a slight curve along the top. The mounting holes are properly aligned and the included screws fit well. The included bit is suitable for a single use, as it became misshapen after tightening the screws, but it performed as needed. For the price, it is a decent product, but its durability under recoil remains to be seen.
Best scope mount for Marlin 1895
All holes line up exactly I will tell my Friends about this rail.
Easy to install and fit perfectly
Easy to install and fit perfectly. Be sure to follow the manufacturer's torque specs 20 ft/lb and use blue Loctite. I have not an issue with any of the EGW rails and are a quality product.
Appears to be very good quality scope mount in both fit and finish. Holes line up correctly, and there is an extra screw-in case you loose one. When I need for another one, I would repurchase this one.
Mounting holes and screws matched nicely, now sporting an EOTECH holographic sight on this ...
Scope Mount Rail worked as advertised on my Camp 9. Mounting holes and screws matched nicely, now sporting an EOTech holographic sight on this carbine.
Very happy. American made is the only way to go ...
This mount fits my 2006 Marlin 336w perfectly . Very happy . American made is the only way to go with firearms . Great price too
Marlin 336 Picatinny Rail
Item is well made and sturdy scope mount. Holds devices securely. On my application, (Marlin 336), the standard rear rifle sight is just visible enough to be usable with this mounted and empty (of course). The screws seem sturdy and tightened fine.
Works great! Hasn't moved yet in 100+ rounds of 308
Perfect eye relief for me on my Marlin 308MX with Vortex 4-16x44 Viper HST scope with matched medium rings and a leather Tourbon buttstock cover/cheek rest. I've put five boxes of ammo through the rifle in the last two weekends, and this base + scope combo is still holding zero @ 100 yards with 1 MOA 3-shot groups.
Perfect for Marlin 336ss Mount
Well built scope mount, fits perfectly, solid materials. I don't cut corners when it comes to my firearms, and I'm very happy with the quality of this rail mount. I also love that I can still easily view the iron sites if I don't mount a scope.
Installed this on my Marlin 1895GBL. Fit great and was easy to install. Used it to mount a vortex strike fire II 2-7x32 scope on weaver rings. Very please with the outcome.
Marlin 1895 Picatinny rail
Just what I needed for my Marlin 1895 trapper, to mount a vortex crossfire red dot. Perfect.