EGW Dovetail Sight Mount For the DeltaPoint Pro (fits Bushnell RXS-250/100, Shield RMS/RMSc/SMS & more) with the H&K VP9, VP9SK, P30, P30L, P30SK, HK45, HK45C, VP40
This Mount Fits:
- H&K VP9
- H&K VP9SK
- H&K VP40
- H&K P30
- H&K P30L
- H&K P30SK
- H&K 45
- H&K 45C
This mount is not intended for use with the optics ready version of these pistols. The optics ready version can be found here.
This mount does not fit:
- HK USP
- Any Optics Ready H&K Pistol
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:
- Leupold DeltaPoint Pro
- Bushnell RXS-100
- Shield RMS/RMSc/SMS
- Redfield Accelerator
- Holosun 407K/507K (the rear pins on the mount must be removed for the Holosun 407K/507K to sit on the mount)
EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
The EGW HK VP9 Red Dot Mount is meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
HK VP9 Red Dot Mount Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
- HK VP9 Leupold Deltapoint Pro mount
- HK VP9SK Leupold Deltapoint Pro mount
- HK VP40 Leupold Deltapoint Pro mount
- HK P30 Leupold Deltapoint Pro mount
- HK P30L Leupold Deltapoint Pro mount
- HK P30SK Leupold Deltapoint Pro mount
- HK 45 Leupold Deltapoint Pro mount
- HK 45C Leupold Deltapoint Pro mount
HK VP9 Quick Links :
The distinction between inferior quality and premium scope mount is undeniable. At MSP, we only offer red dot mounts from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Be the first to rate this item!Write Review