EGW Dovetail Sight Mount For the DeltaPoint Pro for Glock
Not Yet Rated | Write the First Review SKU: 198-49414

EGW Dovetail Sight Mount For the DeltaPoint Pro (fits Bushnell RXS-250/100, Shield RMS/RMSc/SMS & more) for Glock

This mount fits the:

• Glock 17
• Glock 19
• Glock 19x
• Glock 20
• Glock 21
• Glock 22
• Glock 23
• Glock 24
• Glock 26
• Glock 27
• Glock 29
• Glock 30
• Glock 30 SF
• Glock 31
• Glock 32
• Glock 33
• Glock 34
• Glock 35
• Glock 36 (The EGW mount is wider than the slide, but it will still work)
• Glock 37
• Glock 38
• Glock 39
• Glock 41
• Glock 42 (The EGW mount is wider than the slide, but it will still work)
• Glock 43 (The EGW mount is wider than the slide, but it will still work)
• Glock 43x (The EGW mount is wider than the slide, but it will still work)
• Glock 44
• Glock 45
• Glock 46
• Glock 48 (Our mount is wider than the slide, but it will still work)
• Canik TP9SF
• Bersa BP9CC
• Tactical Solutions .22lr Conversion
• Advantage Arms .22lr Conversion
  

Does not fit Glock MOS models.

• Glock 17 Gen 4 MOS
• Glock 19 Gen 4 MOS
• Glock 34 Gen 4 MOS
• Glock 35 Gen 4 MOS
• Glock 40 Gen 4 MOS
• Glock 41 Gen 4 MOS
• Glock 22 Gen 5 MOS
• Glock 23 Gen 5 MOS
• Glock 34 Gen 5 MOS
• Glock 45 MOS
• Glock 43x MOS
• Glock 48 MOS

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:

• Bushnell RXS-100
• Bushnell RXS-250
• Crimson Trace CTS-1500
• Holosun 407K*
• Holosun 507K*
• Jpoint
• Leupold DeltaPoint Pro
• Optima
• Redfield Accelerator
• Shield RMS
• Shield RMSc
• Shield SMS
• Sig Romeo Zero
• Vortex Defender-CCW

(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K to fit.)

EGW Glock sights are meant to be installed from the left to the right. The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Alt Description:

The distinction between inferior quality and premium Glock Red Dot Mount is undeniable. At MSP, we only offer Glock Accessories from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.