ATI Strikeforce Mini 14 Folding Stock
Fits: All Ruger Mini-14® Rifles with a Serial Number 181 and Above
Also Fits: All Ruger Mini Thirty® Rifles (Must remove small amount of material around the mag-well)
Enhance the look and versatility of your Mini-14 or Mini-30 with ATI Strikeforce Mini 14 Stock, which comes fitted with six-position, folding buttock, flexible cheek pad, butt cap, pistol grip, and ventilated forearm. Ultra-tough DuPont ® high-temperature glass-reinforced polymer structure comfortably withstands extreme temperatures and chemical interaction. The TrakLOCK mounting system guarantees that the stock stays on the buffer tube and reduces the need for external locking mechanisms. The Scorpion Recoil System with the Razorback Recoil Pad absorbs shock so that the body doesn't have to, while the Scorpion flexible gun grip with the Sure-Grip finish provides a powerful, non-slip hold shot after shot. The compact, flexible cheek pad device, featuring a wide 1.25 "flexible cheek pad and a small 0.5" adjustable cheek pad, can fit almost any person. Dual-sided binding to the QD. Includes one 7 "Picatinny Top Rail, two 2" Picatinny Rail and one 2 "Swivel Stud Picatinny Rail, as well as blank covers for rails not in service. Tactical Sling Attachment Port. Drop-tube Connector for use with iron sights. It comes with the required mounting hardware.
Features and Benefits of the ATI Strikeforce Mini 14 Stock
- TactLite Six-Position Adjustable Mini-14 Stock
- Side-Folds to the Left of the Receiver
- Can be Fired from Folded Position
- TracLOCK System
- Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
- Provides Smooth Secure Stock Adjustments
- Eliminates the Need for Secondary Locking Mechanisms
- No Snag Points
- Dual Sided QD Attachment Point
- Removable/Adjustable Cheekrest System
- Elongated Design to Fit All Users
- Includes Short Cheekrest with ½” of Adjustment
- X Series Thin Recoil Pad
- Non-Slip, Removable
- X1 Style Pistol Grip
- Sure-Grip Texture
- Recoil Impact is Absorbed
- Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
- Not Affected by Chemicals or Extreme Temperatures
- Four Forward Picatinny Rail Locations
- One 7" Picatinny Top Rail
- Two 2" Pictinny Rails
- One 2" Swivel Stud Picatinny Rail
- Blank Covers for When Rails are Not in Use
- Additional Ventilation in Forend and Top Cover
- Slot for Tactical Sling Attachment
- Two Sling Swivel Studs
- Mounting Hardware Included
- DuPont® Extreme Temperature Glass Reinforced Polymer
- Limited Lifetime Warranty
- Made in the USA
ATI Mini 14 Stock Installation
- mini 14 folding stock ati
- mini 14 30 stocks
- mini 14 ati stock
- ati mini 14 stock
- folding stock mini 14
- mini 14 folding stock
The distinction between inferior quality and premium Mini 14 stock is undeniable. At MSP, we only offer MINI 14 Accessories from the most trusted brands like ATI Outdoors. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Best mini 14 stock
This is one of the best additions I have made to my collection; it looks and functions much better than I expected. My mini-30 looks and function are great... Everybody who sees it struggles to look away. If you are looking to change up your Mini-14/30, I strongly suggest this stock.
mini 14 tactical stock
Mounted on my mini in just a few minutes, Mounts solid & snug, just like it should, if I had another mini, I would buy another.
ATI Strikeforce Mini 14 Stock
fits good - some screws were to short and had no threads
ATI mini-14 strikeforce stock Works great.
ATI mini-14 strikeforce stock works great. I use it on a scout set up, with a long eye relief scope. Good ergonomics. A little heavier than I expected but not too bad. Top, bottom, and side rails allow for plenty of add-ons, although the mini14 being a front-heavy platform may make it unbalanced. The forward-mounted scope is about as much as I'm comfortable with. The top rail is v cut, so you are still able to utilize the stock iron sights. The cheek risers that are provided are awesome and are perfect for mounting optics. The stock fits TIGHT, but don't go breaking out the Dremel. A little muscle will snap it right in place (in my experience).
ATI Ruger mini 14 folding stock fit perfectly
ATI Ruger mini 14 folding stock fit perfectly with no modifications needed. Took about 20 minutes total, including cleaning the rifle. Very sturdy. My only issue is the rail system as I feel the 2 inch rails are a little short. An extra inch or two would have been nice. Overall a great stock, and I would recommend this to anybody.
ATI Mini 14 folding stock is very comfortable and affordable
I received my purchase in 2 days. It took only minutes to change over my mini14. Very comfortable, as well as affordable. I also purchased a front grip, which allows much better control. If you like shooting your mini14, you like it a lot better with this strikeforce folding stock setup. I highly recommend this ATI strikeforce mini 14 stock
Great Mini 14 stock
I could not be more thrilled about my decision to buy this stock for my mini 14. The quality is outstanding, and it feels solid and balanced. I have already gone hog hunting with the new tactical setup. I only wish ATI labeled the nuts and bolts more precisely for an easier install. Plus I love the Destroyer Gray Color. And thank you MSP I will be back for Mini 14 Accessories.
This Mini-14 stock is very comfortable
I received my order in 2 days. It took only minutes to change over my mini14. This Mini-14 stock is very comfortable as well as affordable. I also bought a front grip, which allows for much better control. If you like shooting your mini14, you like it a lot better with this strikeforce folding stock setup. I highly advise this ATI Strikeforce stock.
excellent Mini-30 stock
This is an excellent Mini-30 stock. It is straightforward to install and easy to add accessories to. The one shortcoming is that it's made to fit a mini14, not a mini30, so you have to grind out the magazine well. They say there's only a little bit to remove, but it's quite a bit more than a little. It's manageable, however, if you have a Dremel tool or something like that though.
They thought of everything
This stock is way more than I anticipated. They thought of everything. I still can’t believe that I picked it up for under $120. It for great as well and only took 30 minutes to assemble fully. The only point I will say. Kind of a pet left of mine. I hate it when companies use a different type of screw heads. (Or hex torx Phillips and flat head stick with one and roll with it). But that doesn’t take away from the value of this stock or the quality.