EGW Dovetail Sight Mount For the DeltaPoint Pro for Springfield XD, XDM Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima)
Mounting Hardware is Included
This mount fits:
All XD Models that are NOT the Optics Ready Model
This includes, but is not limited to:
- Springfield XD® MOD.2® – 3" SUB-COMPACT MODEL
- Springfield XD® MOD.2® – 3.3" SUB-COMPACT MODEL
- Springfield XD® MOD.2® – 4" SERVICE MODEL
- Springfield XD® MOD.2® – 4" SERVICE MODEL THREADED BARREL
- Springfield XD® MOD.2® – 5" TACTICAL MODEL
- Springfield XD® 3" SUB-COMPACT MODEL
- Springfield XD® 4" SERVICE MODEL
- Springfield XD(M)® 3.8" COMPACT MODEL
- Springfield XD(M)® 3.8" MODEL
- Springfield XD(M)® 4.5" MODEL
- Springfield XD(M)® 4.5" THREADED BARREL MODEL
- Springfield XD-S® 3.3" MODEL
- Springfield XD-E™ 3.3" SINGLE STACK
- Springfield XD-E™ 3.8" SINGLE STACK
Does not fit:
- Springfield XD(M)® 5.25" COMPETITION SERIES MODEL
- Any Optics Ready Springfield XD
*For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, Holosun 407K/507K (the rear pins on the mount must be removed for the Holosun 407K/507K to sit on the mount)
EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.\
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
- Remove the rear sight*
- Install the EGW Sight Mount
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
The distinction between inferior quality and premium scope mount is undeniable. At MSP, we only offer red dot mounts from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Be the first to rate this item!Write Review